DBPOWER DJS90

DBPOWER 1600A 18000mAh 휴대용 차량용 점프 스타터(모델 DJS90) 사용 설명서

차량 비상 상황 및 휴대용 전원 공급이 필요할 때 믿음직한 동반자가 되어 드립니다.

1. 제품 오버view

The DBPOWER DJS90 Portable Car Jump Starter is a versatile device designed to provide emergency jump-starting for vehicles, act as a portable power bank, and offer essential lighting functions. It features a high peak current of 1600A and an 18000mAh battery capacity, capable of starting various 12V vehicles.

DBPOWER 1600A 18000mAh Portable Car Jump Starter with smart clamps 및 액세서리

Figure 1: DBPOWER DJS90 Portable Car Jump Starter and included accessories.

주요 특징:

  • Vehicle Jump Starting: 1600A peak current for 12V vehicles (up to 7.5L gas / 5.5L diesel engines).
  • 휴대용 전원 은행: 18000mAh capacity with 2 USB outputs for charging smartphones, tablets, and other devices.
  • 비상용 LED 조명: Features stable, strobe, and SOS signal modes.
  • 안전 보호 : Heavy-duty smart clamps with low/high voltage, over-temperature, short-circuit, reverse polarity, and jump starter time-out protection.
  • 내구성: Operates in temperatures from -4°F to 140°F.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

Contents of the DBPOWER DJS90 package including jump starter, clamps, USB cable, user manual, and storage case.

Figure 2: What's in the Box - DBPOWER DJS90 Jump Starter and accessories.

  • 1x DBPOWER DJS90 Jump Starter Unit
  • 1x Intelligent Jumper Clamps
  • 1x USB Line (Charging Cable)
  • 1x 사용자 설명서
  • 1x Hard Shell Storage Case

3. 설정 및 충전

Before initial use, fully charge the jump starter. It is recommended to recharge the device after each use to maintain optimal battery life.

점프 스타터 충전:

  1. Locate the USB input port on the jump starter.
  2. Connect the provided USB charging cable to the input port.
  3. Plug the other end of the USB cable into a suitable USB power adapter (not included) or a car's USB port.
  4. The LED display will indicate the charging progress. Ensure the device is fully charged before storing or using for jump-starting.
Diagram showing the multifunction ports of the DBPOWER DJS90 jump starter, including USB outputs, input, and car jump start output.

Figure 3: Multifunction ports on the DBPOWER DJS90.

4. 작동 지침: 차량 점프 스타트 방법

Always ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

단계별 가이드:

  1. 차량 준비: Turn off the vehicle's ignition and all accessories. Engage the parking brake.
  2. 점프 케이블을 점프 스타터에 연결하세요: Open the protective flap on the jump starter and firmly insert the blue end of the intelligent jumper clamps into the car jump start output port.
  3. 연결 Clamp배터리에 대한 s: Attach the red (positive, +) clamp to the positive terminal of the vehicle's battery. Attach the black (negative, -) clamp to the negative terminal of the vehicle's battery. Ensure a secure connection.
  4. 표시등 확인: The indicator light on the intelligent jumper clamps should turn solid green, indicating a safe and ready connection. If it flashes or shows a different color, refer to the troubleshooting section.
  5. 차량 시작: Enter your vehicle and start the engine. If the vehicle does not start immediately, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
  6. Cl 제거amps: Once the vehicle starts, immediately remove the black (negative) clamp from the vehicle battery, followed by the red (positive) clamp. Then, disconnect the jumper clamp점프 스타터에서 왔습니다.
Four-step visual guide to jump starting a vehicle using the DBPOWER DJS90: Insert, Connect, Start, Remove.

Figure 4: Instructions to Start Your Vehicle.

Video 1: Demonstration of using a portable jump starter to start a vehicle. This video illustrates the process of connecting the jump starter to a car battery and successfully starting the engine, highlighting the ease of use and independence from roadside assistance.

5. Operating Instructions: Power Bank & LED Light

보조 배터리로 사용:

The DJS90 can charge various electronic devices via its USB output ports.

  1. 기기의 USB 충전 케이블을 점프 스타터의 USB 출력 포트 중 하나에 연결하세요.
  2. 점프 스타터가 자동으로 기기 충전을 시작합니다.
  3. The 18000mAh capacity can provide multiple charges for smartphones, tablets, and other small electronics.
Infographic showing the 18000mAh power bank capabilities of the DBPOWER DJS90, illustrating how many times it can charge various devices like iPhones, Kindles, and iPads.

Figure 5: Power Bank Capabilities.

LED 조명 사용:

내장된 LED 조명은 다양한 상황에 맞춰 여러 가지 모드를 제공합니다.

  1. Locate the power button for the LED light (often integrated with the main power button or a dedicated light button).
  2. Press and hold the button to turn on the stable light mode.
  3. Press the button again to cycle through strobe mode, SOS signal mode, and then off.
Visual representation of the four lighting modes available on the DBPOWER DJS90: Stable Light, Strobe Light, SOS, and Red Emergency Light.

Figure 6: Four Lighting Modes.

6. 안전 기능

The DBPOWER DJS90 is equipped with intelligent jumper clamps that provide multiple safety protections:

Infographic detailing the spark-proof and supersafe smart clamps with icons for over charge, short circuit, over discharge, reverse polarity, over current, reverse connection, over heat, and reverse charge protections.

그림 7: 스마트 Clamps Safety Protections.

  • 저/고볼륨tage 보호: Prevents damage from incorrect voltage 레벨.
  • 과열 보호: 기기가 과열되면 자동으로 전원이 꺼집니다.
  • 단락 보호: 우발적인 단락으로 인한 손상을 방지합니다.
  • 역 극성 보호 : 만약 문제가 발생하면 경고를 보내고 작동을 방지합니다.amps가 잘못 연결되었습니다.
  • Jump Starter Time-Out Protection: Automatically shuts off after a period of inactivity to conserve power.

7. 유지관리

  • 정기적으로 충전하세요: For optimal performance and longevity, fully recharge the jump starter after each use and at least every three months if stored.
  • 저장: Store the device in its hard shell case in a cool, dry place, away from direct sunlight and extreme temperatures.
  • 청소: Wipe the unit and clamps with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.

8. 문제 해결

  • 차량 시동 불가: CL을 확인amps are securely connected to the correct battery terminals. Check the jump starter's battery level. If the intelligent clamps' indicator light is not solid green, refer to the manual for specific error codes or try reconnecting.
  • 점프 스타터가 충전되지 않음: Verify the charging cable and adapter are working correctly. Ensure the charging port on the jump starter is clean and free of debris.
  • LED 조명이 작동하지 않음: Check if the jump starter is powered on. Press and hold the light button to activate.

9. 사양

특징사양
모델 번호DJS90
피크 출력 전류1600 Amps
배터리 용량18000mAh
엔진 호환성Up to 7.5L Gas / 5.5L Diesel (12V)
작동 온도-4°F ~ 140°F(-20°C ~ 60°C)
USB 출력2 USB outputs (details may vary, refer to unit)
품목 무게2.83파운드
패키지 크기9.84 x 5.24 x 4.49 인치

10. 보증 및 지원

DBPOWER is committed to ensuring customer satisfaction. If you have any questions or require assistance with your product, please do not hesitate to contact our customer support team. We aim to respond to all inquiries within 24 hours.

For support, please visit the official DBPOWER web자세한 내용은 해당 사이트를 참조하거나 제품 포장에 제공된 연락처 정보를 참조하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.