Pipishell Full Motion TV Wall Mount with Extension Bracket Instruction Manual

1. 중요한 안전 정보

Please read these instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. The manufacturer is not responsible for damage or injury caused by incorrect mounting or operation.

• 중량 용량: This TV wall mount is designed for TVs weighing up to 110파운드(50kg). 이 중량 제한을 초과하지 마십시오.
• TV 크기 호환성: 대부분과 호환 가능 40~82인치 flat or curved TVs.
• VESA 호환성: Supports VESA mounting patterns from 200x100mm ~ 600x400mm. Verify your TV's VESA pattern before installation.
• 벽 유형: 이 마운트는 다음 위치에 설치하도록 설계되었습니다. 목재 스터드 or solid concrete/brick walls. 건식벽체에만 설치하지 마십시오.
• UL 등재: This product is UL Listed, indicating it meets specific safety standards.

Image 1.1: Reinforced stability of the mount, highlighting heavy-duty steel arms and UL certification for safety and durability.

2. 패키지 내용

Please check to ensure all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer service.

2.1 필요한 도구(포함되지 않음)

• 연필
• 스터드 찾기
• Drill with appropriate drill bits (e.g., 5/32" (4mm) for wood studs, 3/8" (10mm) for concrete)
• 수준
• 줄자
• 소켓 렌치 또는 조절식 렌치
• Phillips 헤드 스크루 드라이버

2.2 Hardware and Components (Included)

• 벽판 조립체
• TV 브래킷 (2)
• Extension Brackets (2)
• Various TV Screws, Washers, and Spacers (M4, M6, M8)
• Lag Bolts and Concrete Anchors
• 레벨 버블
• 케이블 타이

3. 설정 및 설치

3.1 설치 전 확인 사항

1. Verify your TV's weight, size, and VESA pattern are within the mount's specifications.
2. Determine the desired viewTV 높이를 조절하세요.
3. Locate the wall studs using a stud finder. Mark the center of the studs.

3.2 월 플레이트 설치

The extension bracket feature allows for installation on wood studs with spacing between 16 and 24 inches.

1. Position the wall plate assembly on the wall at your desired height, ensuring it is level. Mark the drill holes.
2. For wood stud installation, drill pilot holes (e.g., 5/32" or 4mm) into the center of the studs. For concrete/brick, drill pilot holes (e.g., 3/8" or 10mm) and insert concrete anchors.
3. Attach the wall plate to the wall using the provided lag bolts. Tighten securely.

Image 3.1: The extended wall plate design provides a flexible solution for mounting on walls with stud spacing between 16 and 24 inches.

Image 3.2: This feature helps center your TV for optimal viewing, even when wall studs are not perfectly centered.

3.3 TV 브래킷을 TV에 부착하기

1. TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
2. Select the appropriate screws, washers, and spacers for your TV's VESA mounting holes.
3. Attach the two TV brackets to the back of your TV. Ensure they are securely fastened and evenly spaced.

3.4 TV를 벽면 플레이트에 장착하기

1. With assistance, carefully lift the TV and hook the TV brackets onto the wall plate.
2. TV가 벽걸이 받침대에 제대로 고정되었는지 확인하십시오.
3. Tighten the safety screws or locking mechanisms on the TV brackets to prevent accidental dislodgement.

4. TV 마운트 작동 방법

This full motion mount allows for flexible adjustment to achieve the best view잉 각도.

4.1 회전 조절

The mount allows for a swivel range of +/-45°. Gently push or pull the TV to the desired left or right angle.

Image 4.1: The mount offers a smooth swivel motion of up to 45 degrees in either direction for flexible view주고받음.

4.2 기울기 조정

Adjust the tilt angle from +5° ~ -15° to reduce glare and optimize viewing. This adjustment is tool-free.

Image 4.2: Easily adjust the TV's vertical angle from +5° to -15° without tools to minimize glare and improve comfort.

4.3 확장 및 수축

The mount allows the TV to extend from the wall by 2.89인치에서 16.3인치까지. Gently pull the TV forward or push it back towards the wall to adjust the distance.

Image 4.3: Adjust the TV's distance from the wall, extending up to 16.3 inches or retracting to 2.89 inches for optimal view공간이 있어요.

5. 유지관리

• 정기 점검: 모든 나사와 연결부를 주기적으로 점검하여 단단히 고정되어 있는지 확인하세요.
• 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
• 매끄럽게 하기: The moving parts are designed for smooth operation. No lubrication is typically required. If movement becomes stiff, check for debris or loose components.

6. 문제 해결

• TV가 수평이 아닙니다: Check the level of the wall plate during installation. Most mounts have a post-installation leveling adjustment. Refer to the specific mechanism on your mount.
• Difficulty adjusting swivel/tilt/extension: Ensure no cables are snagged or obstructing movement. Check if any adjustment knobs or screws are overtightened. The mount features improved torque accuracy for smoother movement.
• 벽에 고정하는 부분이 헐렁한 느낌이 듭니다. Immediately remove the TV from the mount. Re-check all wall plate fasteners and ensure they are securely anchored into the studs or concrete. If issues persist, consult a professional installer.
• TV brackets do not fit TV: Verify your TV's VESA pattern matches the mount's compatibility (200x100mm to 600x400mm). Ensure you are using the correct screws and spacers for your TV model.

7. 사양

8. 보증 및 고객 지원

Pipishell products are designed for durability and performance. For warranty information or technical assistance, please contact Pipishell customer support through their official web제품을 구매한 사이트 또는 소매업체.

고객 지원팀에 문의하실 때는 제품 모델명과 구매일자를 준비해 주시기 바랍니다.