Pro-Ject VC-S3 (Model 9120122295748)

Pro-Ject VC-S3 Premium Record Cleaning Machine User Manual

Model: VC-S3 (9120122295748) | Brand: Pro-Ject

소개

The Pro-Ject VC-S3 is a premium record cleaning machine designed to effectively remove dirt, dust, and static from your vinyl records, ensuring optimal playback quality and longevity. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your VC-S3 unit.

Pro-Ject VC-S3 Premium Record Cleaning Machine, angled view

이미지: 각도 view of the Pro-Ject VC-S3 Premium Record Cleaning Machine, showcasing its silver finish and compact design. A record is placed on the platter with the vacuum arm positioned over it.

제품 특징

  • Superfast & super strong cleaning: Efficiently cleans records with powerful vacuum suction.
  • Completely dry record within 2 rotations: Designed for rapid drying, allowing immediate playback.
  • Big 2.5l tank for vacuumed cleaning liquid: Large capacity waste fluid tank for extended use.
  • Removes static load of vinyl records: Helps eliminate static electricity that attracts dust.
  • Removes cleaning fluid (Wash it) residue free: Ensures no residue is left on the record surface after cleaning.

설정

  1. 짐 풀기: Carefully remove the VC-S3 unit and all accessories from its packaging. Retain packaging for future transport or storage.
  2. 놓기: Place the machine on a stable, level surface away from direct sunlight, heat sources, and excessive dust. Ensure adequate ventilation around the unit.
  3. 전원 연결: Connect the provided power cable to the VC-S3 and then to a suitable wall outlet. Ensure the power switch is in the "Off" position before connecting.
  4. 유체 준비: Prepare your record cleaning fluid according to its manufacturer's instructions. Pro-Ject recommends using their "Wash it" cleaning fluid for optimal results.
맨 위 view of Pro-Ject VC-S3 with a record on the platter

이미지: 위에서 아래로 view of the Pro-Ject VC-S3, showing a vinyl record placed on the central spindle and the vacuum arm positioned to the right.

작동 지침

Follow these steps for effective record cleaning:

  1. 장소 기록: Carefully place the record onto the spindle, ensuring it sits flat. Secure it with the record clamp.
  2. 유체를 바르십시오: Apply a small amount of cleaning fluid evenly across the record surface. Use a dedicated brush (not included) to gently spread the fluid.
  3. 시동 모터: Flip the "MOTOR" switch to the "I" position to start the platter rotation. Allow the fluid to work for a few rotations.
  4. Engage Vacuum: Flip the "VACUUM" switch to the "I" position to activate the vacuum suction. The vacuum arm will draw the fluid and contaminants from the record surface.
  5. Dry Record: Allow the vacuum to operate for 1-2 rotations (approximately 2 seconds) until the record surface appears dry. For heavily soiled records, a second application and vacuum cycle may be necessary.
  6. 작동 중지: First, flip the "VACUUM" switch to "O", then the "MOTOR" switch to "O".
  7. 기록 삭제: Carefully remove the record clamp and then the cleaned record.
Close-up of the motor and vacuum switches on the Pro-Ject VC-S3

이미지: 클로즈업 view of the two toggle switches on the side of the Pro-Ject VC-S3, labeled "MOTOR" and "VACUUM", indicating their on/off positions.

유지

  • 폐기물 탱크 비우기: Regularly check and empty the waste fluid tank. The tank is located at the bottom of the unit. Refer to the diagram in the full manual for exact location and removal instructions. Dispose of waste fluid responsibly.
  • Clean Vacuum Arm: Periodically inspect the felt strips on the vacuum arm for wear or debris. Clean them gently with a damp cloth. Replace worn strips to maintain optimal suction.
  • 외부 청소: Clean the exterior of the machine with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • 저장: When not in use for extended periods, disconnect the power and store the unit in a dry, dust-free environment.

문제 해결

문제가능한 원인해결책
Record not drying completely or wet streaks remain.
  • Insufficient vacuum time.
  • Worn or dirty vacuum arm felt strips.
  • Waste tank is full.
  • Record warpage preventing full contact.
  • Increase vacuum time to 2-3 rotations.
  • Clean or replace felt strips.
  • Empty the waste tank.
  • Ensure record is as flat as possible; apply gentle pressure to the vacuum arm if necessary (with caution).
기계가 켜지지 않습니다.
  • 전원 케이블이 연결되지 않았습니다.
  • 콘센트에서 전기가 나오지 않습니다.
  • 본체와 벽면 콘센트에 전원 케이블이 제대로 연결되어 있는지 확인하십시오.
  • 다른 기기로 콘센트를 테스트해 보세요.
Motor or vacuum not engaging.
  • Switches not fully engaged.
  • 내부 오류입니다.
  • Ensure switches are firmly in the "I" position.
  • 문제가 지속되면 고객 지원팀에 문의하세요.

명세서

  • 모델 이름: VC-S3
  • 품목 모델 번호: 9120122295748
  • 상표: 프로젝트
  • 색상:
  • 제품 크기: 20 x 18 x 18인치(길이 x 너비 x 높이)
  • 품목 무게: 19.41파운드
  • 전원: 코드식 전기
  • 폐기물 탱크 용량: 2.5리터(약)

보증 및 지원

Specific warranty terms and detailed support contact information are not provided in this document. For warranty claims, technical support, or service inquiries, please refer to the official Pro-Ject Audio Systems web해당 웹사이트를 방문하시거나 공인 대리점에 문의하십시오. 보증을 위해 구매 증빙 자료를 보관하십시오.

You can visit the official Pro-Ject store on Amazon for more information: Pro-Ject Audio Systems Store

© 2024 Pro-Ject Audio Systems. 모든 권리 보유.

본 설명서는 정보 제공 목적으로만 제공됩니다. 제품 사양은 예고 없이 변경될 수 있습니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.