SKKTKT LED Nightstand with Charging Station and RGB Lights (Set of 2) - Instruction Manual

소개

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SKKTKT LED Nightstand with Charging Station and RGB Lights. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.

안전 정보

• 항상 조립 지침을 주의 깊게 따르세요.
• Do not exceed the maximum weight recommendation of 100 kilograms (220 lbs) on the tabletop.
• 전기 부품은 물이나 과도한 습기로부터 멀리하십시오.
• Ensure all connections for the LED lights and charging station are secure before use.
• 조립하는 동안 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
• 부드러운 d만 사용하세요amp cloth for cleaning to avoid damaging the high-gloss surface.

패키지 내용

조립을 시작하기 전에 모든 구성품이 있는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.

• Nightstand components (Engineered Wood panels, drawers, hardware)
• RGB LED light strip and control unit
• Charging station module (Wireless charger, USB port, Type-C port)
• 조립 가이드
• 조립 도구

Image: Two SKKTKT LED Nightstands, black high-gloss finish, with blue LED lighting, integrated charging stations on top, and two drawers each. This image shows the complete product set.

설정 및 조립

Assembly is required for this product. All parts are clearly labeled, and an installation guide is included. It is recommended to assemble the nightstand on a soft, clean surface to prevent scratches.

1. 구성 요소 풀기: Carefully remove all parts from the packaging and lay them out. Verify against the parts list in the included assembly guide.
2. 부품 식별: Each component is labeled with a letter or number. The assembly guide will reference these labels. Some parts may also feature a unique visual guide showing their placement.
3. 프레임 조립: Follow the step-by-step diagrams in the assembly guide to construct the main frame of the nightstand. Secure all screws and fasteners as instructed.
4. 서랍 설치: Attach the silent sliding rails to the nightstand frame and the drawer sides. Assemble the drawer boxes and insert them into the rails. Ensure smooth operation.
5. 손잡이 부착: Secure the gold-colored handles to the front of the drawers.
6. LED 조명 설치: Adhere the RGB LED light strip to the designated areas as shown in the assembly guide. Connect the LED light strip to the control unit and then to the main power supply.
7. 연결형 충전 스테이션: Place the charging station module into its designated slot on the tabletop and connect its power cable to the main power supply.
8. 최종 확인: 모든 연결부가 단단히 조여져 있고 협탁이 안정적인지 확인하십시오.

Image: A diagram illustrating the product dimensions: 19.6"W x 15.7"D x 22.8"H. This helps in understanding the size and fit during assembly.

이미지: 클로즈업 view of the silent sliding rail mechanism for the drawers, highlighting the smooth operation feature.

작동 지침

LED 조명 제어

The nightstand features RGB LED lights with 24 color options and adjustable brightness, controlled via a panel on the tabletop.

• 색상 선택: Short press the "rainbow circle" button on the control panel to cycle through 24 different RGB colors.
• 백색광: Press the "W" button to set the LED lights to a pure white color.
• 밝기 조정: Long press the "Light" button to adjust the brightness level. There are 3 adjustable brightness settings.

Image: A visual guide to the 24 color RGB lights and the 3 adjustable brightness settings, demonstrating the control panel functions.

Human Body Sensor (Auto-on/off LED Light)

The integrated human body sensor automatically controls the LED lights for convenience.

• 자동 활성화 : The LED lights will switch on automatically when you approach within 1-2 meters of the nightstand.
• 자동 비활성화: The lights will turn off automatically approximately 30 seconds after you leave the sensor's range.
• 센서 제어: The "Body" button on the control panel allows you to enable or disable the human body sensor function.

Image: An illustration of the smart human body induction feature, showing the LED lights activating as a person approaches the nightstand.

충전 스테이션

The nightstand is equipped with a versatile 3-in-1 charging station on its tabletop.

• 무선 충전: Place compatible devices on the designated wireless charging pad. Ensure the device is centered for optimal charging.
• USB 포트: Connect devices using a standard USB cable to the USB-A port.
• C 형 포트 : Connect devices using a USB Type-C cable to the Type-C port.

이미지: 자세한 view of the RGB LED nightstand's control panel and charging station, highlighting the wireless charger, USB, and Type-C ports.

Image: A close-up of the nightstand's charging station in use, showing a smartphone wirelessly charging and other devices connected via USB cables.

유지

To maintain the appearance and functionality of your SKKTKT LED Nightstand, follow these cleaning and care instructions:

• 표면 청소: The high-gloss surface is waterproof and easy to clean. Use a soft, slightly damp cloth to wipe away dust and spills. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• 서랍 유지 관리: Periodically check the drawer rails for any debris that might hinder smooth operation. Wipe clean if necessary.
• 전기 부품: Ensure the charging station and LED light connections remain dry and free of dust. Do not attempt to disassemble electrical components.

Image: A collage highlighting key features: the smooth high-gloss surface, the spacious two large drawers, the silent sliding rail mechanism, and the vibrant RGB light mode.

문제 해결

침대 옆 탁자에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

명세서

보증 및 지원

For warranty information or technical support, please refer to the documentation included with your purchase or contact SKKTKT customer service directly.

You can visit the official SKKTKT store for more information: SKKTKT Store on Amazon