1. 서론
This document provides instructions for the HumanCentric Power Supply Holder Add-On (Model 101-2110-PSH). This product is designed as an optional accessory for the HumanCentric Dual VESA Sleeve (Part Number 101-2110). Its primary function is to securely hold the power supply for compatible Dell OptiPlex Micro Form Factor (MFF) computers, enhancing cable management and workspace organization.
2. 호환성
The Power Supply Holder (Model 101-2110-PSH) is an add-on product and requires the HumanCentric Dual VESA Sleeve (Part Number 101-2110) for installation. It is not a stand-alone product.
Compatible Dell OptiPlex MFF Models:
- 3000 Series: 3000, 3040, 3046, 3050, 3060, 3070, 3080
- 5000 Series: 5000, 5050, 5060, 5070, 5090
- 7000 Series: 7000, 7040, 7050, 7060, 7070, 7080, 7090
Note: This product does not fit Dell OptiPlex tower, small form factor, or Wyse models.
3. 설정 및 설치
The Power Supply Holder is designed to integrate with the HumanCentric Dual VESA Sleeve (Part Number 101-2110). Ensure the main VESA sleeve is already installed according to its instructions before proceeding.
설치 단계:
- Prepare the Main Mount: Ensure your HumanCentric Dual VESA Sleeve (101-2110) is securely mounted to your desired surface (VESA, wall, or under-desk).
- Attach the Power Supply Holder: The power supply holder is designed to slide onto or attach to the existing 101-2110 sleeve. Align the mounting points of the power supply holder with the corresponding slots on the VESA sleeve.
- 전원 공급 장치를 확보하십시오: Place your Dell OptiPlex MFF power supply into the holder. The metal enclosure box will secure it underneath the computer mount.
- 케이블 관리: Route the power supply cables neatly to improve desk cable management and maintain a professional installation.
시각적 안내:
설치 동영상:
4. 사용 설명서
Once installed, the Power Supply Holder securely contains your Dell OptiPlex MFF power supply, keeping it out of sight and off your desk. This contributes to a cleaner, more organized workspace by managing cables effectively. No specific operational steps are required beyond initial installation and cable routing.
5. 유지관리
To maintain the product, wipe it with a soft, dry cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the finish.
6. 문제 해결
Issue: Power Supply Holder does not fit.
해결책: Verify that your computer is a Dell OptiPlex Micro Form Factor (MFF) model listed in the compatibility section. This holder is specifically designed for the power supplies of these MFF models and will not fit OptiPlex tower, small form factor, or Wyse models.
Issue: Power Supply Holder cannot be attached.
해결책: Ensure you have the HumanCentric Dual VESA Sleeve (Part Number 101-2110) correctly installed. This power supply holder is an add-on and requires the main sleeve for attachment.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 101-2110-PSH |
| 상표 | 인간중심 |
| 품목 무게 | 1.01파운드 |
| 패키지 크기 | 9.13 x 6.22 x 3.74 인치 |
| 재료 | 금속 |
| 색상 | 은 |
| 장착 유형 | Add-on to HumanCentric Part 101-2110 (which supports Wall Mount, VESA, Under-Desk) |
| 이동 유형 | 결정된 |
8. 보증
This HumanCentric product is covered by a 제한된 평생 보증. Please refer to the warranty information included with your original HumanCentric Dual VESA Sleeve (Part Number 101-2110) or visit the HumanCentric web자세한 내용은 사이트를 참조하십시오.
9. 고객 지원
For technical assistance, installation questions, or any other inquiries regarding your HumanCentric Power Supply Holder Add-On, please contact HumanCentric customer support. You can find contact information on the official HumanCentric web사이트나 구매 문서를 통해 확인하세요.