소개
Thank you for choosing the WORKPRO LED Work Light (Model W130016A). This versatile and durable work light is designed to provide bright, reliable illumination for a wide range of tasks and environments. Featuring multiple light modes, a rotatable stand, strong magnetic base, and power bank functionality, it is an essential tool for professionals and DIY enthusiasts alike. Please read this manual carefully before use to ensure proper operation and maintenance.
Figure 1: WORKPRO LED Work Light (Model W130016A)
제품 특징
- 4가지 조명 모드: High, Medium, Low, and Flashing modes to suit various lighting requirements.
- 180° 회전 스탠드: Adjustable stand with 7 locking positions allows for precise light angle adjustment.
- Rechargeable & Power Bank Function: Equipped with two built-in 3.7V, 2000mAh batteries. Features a Type-C input for charging the light and a USB-A output to function as a power bank for other devices.
- 강력한 자기 베이스: Four N42 magnets on the back allow secure attachment to metal surfaces, providing hands-free operation.
- 내구성 있는 구조: Made from Acrylonitrile Butadiene Styrene (ABS) and metal with TPR soft rubber for corrosion, wear, and impact resistance.
- 방수 및 내충격성: Designed to withstand challenging environments, passing high and low temperature tests.
그림 2: 주요 기능view
설정 및 충전
초기 요금
Before first use, fully charge the WORKPRO LED Work Light. Connect the provided Type-C charging cable to the light's input port and to a compatible USB power adapter (not included). The charging indicator light will show red during charging and turn green when fully charged. A full charge typically takes approximately 3 hours.
파워뱅크 기능
To use the work light as a power bank, open the protective cover on the back of the light. Connect your device's charging cable to the USB-A output port on the work light. The output indicator light will show blue when charging an external device.
Figure 3: Charging Ports and Power Bank Function
Figure 4: Power Bank in Use
작동 지침
전원 켜기/끄기 및 모드 선택
Locate the power button on the back of the work light. Press the button once to turn the light on to the High brightness mode. Subsequent presses will cycle through the modes in the following order: High > Medium > Low > Flashing. To turn the light off, press and hold the power button for 2 seconds, or cycle through all modes until the light turns off.
Figure 5: Light Modes and Operation
Adjusting the Stand and Magnetic Mounting
The integrated stand can be rotated 180° and features 7 adjustable locking positions. Adjust the stand to direct the light as needed. For hands-free use, utilize the four N42 magnets on the back of the light to attach it securely to any metal surface.
그림 6: 조절식 브래킷
Figure 7: Magnetic Mounting in Use
유지
- 청소: 부드러운 천으로 빛을 닦아주세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 저장: Store the light in a cool, dry place away from direct sunlight when not in use for extended periods. Ensure the protective cover for the charging ports is securely closed.
- 배터리 관리 : 배터리 수명을 연장하려면 배터리를 자주 완전히 방전시키지 마십시오. 사용하지 않을 때에도 정기적으로 충전하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 배터리 부족 또는 전원 버튼 문제. | Charge the light fully. Ensure the power button is pressed correctly. |
| 광 출력이 어둡습니다. | 배터리 부족 또는 잘못된 모드입니다. | Recharge the light. Cycle through modes to select a brighter setting. |
| 외부 기기를 충전할 수 없습니다. | Work light battery is low or cable issue. | 작업등의 배터리가 충분히 충전되었는지 확인하십시오. 다른 USB 케이블을 사용해 보세요. |
문제가 지속되면 고객 지원팀에 문의하세요.
명세서
- 모델: W130016A
- 빛의 출처: COB LED
- 명도: Up to 2000 Lumens (High Mode)
- 라이트 모드: High, Medium, Low, Flashing
- 배터리: 2 x 3.7V, 2000mAh Lithium-Ion (4000mAh total)
- 입력 충전 포트: Type-C (5V, 2A)
- 출력 충전 포트: USB-A (5V, 1A)
- 근무 시간: High: 2 hours, Medium: 3 hours, Low: 8 hours
- 재료: 아크릴로니트릴 부타디엔 스티렌(ABS), 금속
- 특별 기능: 180° Rotatable Stand, 4 N42 Magnets, Waterproof, Shockproof
- 제조업체: 항저우 그레이트스타 산업 주식회사
- 한국어: 820909691396
공식 제품 영상
Video: Perfect Work Lights for Every Job (Duration: 1:44). This video demonstrates the features and versatility of the WORKPRO LED Work Light in various scenarios.
보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.