소개
This manual provides instructions for the proper setup, operation, and maintenance of your MXR Phase 90 50th-Anniversary Pedal. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
안전 정보
- Use only the specified power adapter (9 Volts DC, 2.1mm barrel connector, center-negative).
- 페달을 습기나 극한 온도에 노출시키지 마십시오.
- Do not attempt to open or modify the pedal casing.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
제품 끝view
The MXR Phase 90 is a classic phaser guitar effects pedal known for its distinctive modulation sound. This 50th-anniversary edition features a special gold finish and simple, single-knob operation.
이미지: 위에서 아래로 view of the MXR Phase 90 50th-Anniversary Pedal. The pedal is gold-colored with a single black 'SPEED' knob on the top left, an input jack on the right side, an output jack on the left side, and a footswitch with an LED indicator in the center. The MXR logo and 'phase 90' are visible on the top surface.
설정
- 전원 연결: Connect a 9-volt DC AC adapter (not included) to the power input jack on the side of the pedal. Ensure the adapter has a 2.1mm barrel connector and center-negative polarity.
- 기기 입력: Connect your instrument (e.g., guitar) to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- Ampliifier 출력: 페달 왼쪽의 OUTPUT 잭을 페달에 연결합니다. amp표준 1/4인치 악기 케이블을 사용하여 신호 체인의 다음 페달이나 리파이어를 연결합니다.
- 놓기: 페달을 안정적인 표면에 놓거나 페달보드에 통합하십시오.
이미지: 측면 view of the MXR Phase 90 50th-Anniversary Pedal showing the power input jack (left) and the instrument input jack (right). The pedal is gold with a black 'SPEED' knob visible on the top surface.
이미지: 상단 view of the MXR Phase 90 50th-Anniversary Pedal, highlighting the 'INPUT' and 'OUTPUT' labels near the respective jacks. The gold finish and black 'SPEED' knob are prominent.
작동 지침
통제 수단
- 속도 손잡이: This is the only control on the Phase 90. Turning the knob clockwise increases the speed of the phasing effect, while turning it counter-clockwise decreases the speed. Experiment with different settings to achieve various modulation sounds, from subtle sweeps to fast, watery warbles.
- 풋스위치: Press the footswitch to engage or bypass the phasing effect. The LED indicator will illuminate when the effect is active.
이미지: 클로즈업 view of the black 'SPEED' knob on the MXR Phase 90 pedal. The knob has a white indicator line for setting the phase speed.
이미지: 클로즈업 view of the chrome footswitch and the small red LED indicator on the MXR Phase 90 pedal. The footswitch is used to activate or deactivate the effect.
기본 동작
- Ensure all connections (power, input, output) are secure.
- 켜세요 amp리퍼.
- Press the footswitch to activate the Phase 90. The LED will light up.
- Adjust the SPEED knob to achieve your desired phasing 효과.
- To bypass the effect, press the footswitch again. The LED will turn off.
유지
- 청소: 부드럽고 마른 천으로 페달을 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 저장: Store the pedal in a dry environment, away from direct sunlight and extreme temperatures, when not in use.
- 배터리 교체: This pedal is designed for AC adapter use. There is no internal battery compartment.
문제 해결
소리가 나지 않습니다
- 모든 케이블 연결을 확인하세요(계기, amp리파이어, 파워).
- 전원 어댑터가 올바르게 연결되어 전원이 공급되고 있는지 확인하십시오 (전원이 공급되면 LED 표시등이 켜집니다).
- Test with different cables and a different power supply if available.
- 페달을 바이패스하여 악기를 확인하십시오. amplifier가 올바르게 작동하고 있습니다.
효과가 매력적이지 않음
- Ensure the power adapter is connected and functional.
- 풋스위치를 세게 누르십시오. 이펙트가 활성화되면 LED에 불이 들어옵니다.
원치 않는 소음
- 모든 케이블이 차폐되어 있고 상태가 양호한지 확인하세요.
- Check for ground loops in your setup. Try isolating the power supply.
- Ensure the power adapter is rated correctly for the pedal (9V DC, center-negative).
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | M101GLD |
| 이펙트 타입 | 페이저 |
| 통제 수단 | 1x SPEED knob |
| 입력 | 1/4-inch Instrument Jack |
| 산출 | 1/4-inch Instrument Jack |
| 힘 | 9V DC, 2.1mm barrel connector, center-negative (AC adapter not included) |
| 치수 | 5.5 x 4.5 x 2.5 인치(대략) |
| 무게 | 1.16파운드(대략) |
| 색상 | 금 |
보증 정보
This MXR product is covered by a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair. Please retain your proof of purchase for warranty claims.
지원하다
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact MXR customer support through their official website or authorized service centers. Refer to the MXR web최신 연락처 정보는 사이트에서 확인하세요.