소개
Thank you for choosing the FLEXISPOT Standing Desk Converter M17A-40. This manual provides essential information for the safe and efficient use of your new workstation. This 40-inch sit-to-stand desk riser is designed to transform any desk into an ergonomic workspace, allowing for seamless transitions between sitting and standing positions. Its spacious two-tier design accommodates monitors, laptops, keyboards, and mice, promoting comfort and productivity.
안전 정보
조립 및 사용 전에 모든 안전 지침을 읽고 이해하십시오. 지침을 따르지 않을 경우 부상이나 제품 손상이 발생할 수 있습니다.
- The minimum height of the desktop is 4.7 inches.
- The maximum weight recommendation for the desktop is 44 pounds.
- The maximum weight recommendation for the keyboard tray is 4.4 pounds.
- Always ensure the desk converter is stable and not overloaded.
- Keep hands and fingers clear of moving parts during height adjustment to prevent pinching or injury.
- Do not place hot liquids directly on the surface without a coaster.
- Ensure all cables are properly managed to avoid snagging or damage during height adjustments.
설정
The FLEXISPOT Standing Desk Converter M17A-40 arrives almost fully assembled, requiring minimal setup to get started.
- 언박싱: Carefully remove the desk converter from its packaging. Place it on a stable, flat surface where it will be used.
- Attach Optional Keyboard Tray: The keyboard tray is designed for easy attachment. Align the tray with the designated slots on the underside of the main desktop. Slide it into place until it clicks securely. Ensure both sides are firmly latched.
Once the keyboard tray is attached, your desk converter is ready to be customized for your workspace.
작동 지침
The FLEXISPOT Standing Desk Converter features a powerful gas spring system for smooth and effortless height adjustments.
- 높이 조절: To raise or lower the desktop, locate the single lever on the right side of the unit. Squeeze the lever to release the locking mechanism.
- Raising the Desktop: While holding the lever, gently lift the desktop to your desired standing height. Release the lever to lock it into position. The gas spring system will assist in the upward movement.
- Lowering the Desktop: While holding the lever, gently press down on the desktop to lower it to your desired sitting height. Release the lever to lock it into position.
The 2-tier design provides ample space for your setup:
- 그만큼 top tier (40'' width) can comfortably hold a monitor up to 27'' or multiple smaller monitors.
- 그만큼 base tier (12.1'' depth) is designed for a standard keyboard and mouse, or a 13'' laptop, allowing for ergonomic typing and mouse use.
유지
Regular maintenance ensures the longevity and smooth operation of your FLEXISPOT Standing Desk Converter.
- 청소: 부드러운 d로 표면을 닦으십시오.amp 천으로 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.
- 매끄럽게 하기: Periodically check the moving parts of the gas spring system. If movement becomes stiff, apply a small amount of silicone-based lubricant to the pivot points.
- 패스너: Occasionally check all screws and fasteners to ensure they are tight. Retighten if necessary.
문제 해결
If you encounter any issues with your desk converter, refer to the following common troubleshooting tips:
- 높이 조절의 어려움: Ensure the lever is fully squeezed when attempting to adjust the height. Check for any obstructions preventing smooth movement. Verify that the weight on the desktop does not exceed the maximum capacity.
- 흔들림: Ensure the desk converter is placed on a flat, stable surface. Check that all components are securely assembled and tightened.
- Keyboard Tray Loose: Verify that the keyboard tray is correctly inserted into its slots and the locking mechanisms are engaged.
문제가 지속되면 고객 지원팀에 문의하세요.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 플렉스팟 |
| 모델 번호 | M17A-40 |
| 제품 치수 | 23인치 깊이 x 55인치 너비 x 19.7인치 높이 |
| 색상 | 검은색 |
| 스타일 | 현대의 |
| 상단 재료 유형 | 목재 |
| 품목 무게 | 36 파운드 |
| 최대 높이 | 19.7 인치 |
| 최소 높이 | 4.7 인치 |
| 최대 권장 무게(데스크탑용) | 44 파운드 |
| 키보드 트레이의 최대 권장 하중 | 4.4 파운드 |
| 선반의 수 | 2 |
| 필요한 조립 | 네 (최소) |
보증 및 지원
The FLEXISPOT Standing Desk Converter M17A-40 comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official FLEXISPOT web대지.
For customer support, including assistance with assembly, operation, or troubleshooting, please contact FLEXISPOT customer service. Contact information can typically be found on the product packaging or the official FLEXISPOT web대지.