소개
Thank you for choosing the LIFEMOI LP-E6/E6N/E6NH Battery Charger with Card Reader. This multi-functional device is designed to efficiently charge your camera batteries, store SD cards, and transfer data, all in a compact and portable unit. It also features a power bank function for charging other devices.
The charging case is engineered to maintain battery power without loss when stored, offering a standby time of over 5,000 hours for batteries placed inside.
제품 끝view 및 기능
This versatile device combines several essential functions for photographers:
- Dual Battery Charger: Simultaneously charges two LP-E6, LP-E6N, or LP-E6NH batteries.
- SD 카드 리더기: Built-in automatic SD card reader function for direct data transfer to a computer.
- 전원 은행: Can use inserted camera batteries to charge other USB-powered devices.
- 배터리 보관: Securely stores two LP-E6 type batteries and two SD memory cards.
- LCD 디스플레이: Provides real-time battery level, input (charging), output (discharge), and SD card activity status.
- 호환성: Compatible with Canon EOS 5D Mark 2/3/4, 5DS/R, 6D Mark 2/6D, 7D/7D Mark 2/60D/60DA/70D/80D/90D/R5/R6/R7 cameras and their respective LP-E6/E6N/E6NH batteries.
설정
- 풀다: Carefully remove the charger and included USB charging cable from the packaging.
- 전원 연결: Connect the charger to a power source using either the integrated 34cm USB-A cable or a separate USB-C cable (not included). The charger supports 5V/2A input via both USB-A and USB-C ports.
- 배터리 삽입: Open the charging case and insert up to two compatible LP-E6/E6N/E6NH batteries into the designated slots. Ensure they are correctly oriented.
- Insert SD Cards: If desired, insert up to two SD memory cards into the storage slots for safekeeping or into the SD card reader slot for data transfer.
작동 지침
1. 배터리 충전
- Insert one or two LP-E6/E6N/E6NH batteries into the charging slots.
- Connect the charger to a 5V/2A power source using the integrated USB-A cable or a USB-C cable.
- LCD 디스플레이에는 충전 상태와 배터리 잔량이 표시됩니다.tage for each slot. The 'INPUT' indicator will be active.
- Charging speed is approximately 30% faster than standard chargers.
- Once batteries reach 100%, it is recommended to remove them from the charger to prevent potential discharge over extended periods.
2. SD 카드 리더기 사용
- Insert an SD memory card into the dedicated SD card reader slot.
- Connect the charger to a computer using the integrated USB-A cable or a USB-C cable.
- The computer should recognize the SD card as a removable drive, allowing you to read and write data.
- The 'SD' indicator on the LCD display will be active when the card is identified ('Always bright') and during read/write operations ('Shiny').
- The SD card reader supports read/write speeds of up to 25MB/s.
3. 보조배터리로 사용하기
- Ensure at least one charged LP-E6/E6N/E6NH battery is inserted into the charger.
- Connect your external device (e.g., smartphone) to the USB-B output port (8.4V/2A) on the side of the charger using an appropriate USB cable.
- The 'OUTPUT' indicator on the LCD display will be active, indicating discharge.
- Note that the capacity of two LP-E6 batteries is roughly equivalent to one standard smartphone battery, making this feature suitable for emergency charging rather than a primary power bank.
4. LCD 디스플레이 이해
- Battery Display (%): Shows the current charge level of the inserted batteries.
- 입력: Illuminates when the charger is receiving power and charging batteries.
- 산출: Illuminates when the charger is functioning as a power bank, discharging power to an external device.
- SD (Always bright): Indicates an SD card is inserted and identified.
- SD (Shiny/Flashing): Indicates data is being read from or written to the SD card.
유지
- 충전기를 깨끗하고 건조하게 유지하십시오. 부드럽고 마른 천으로 외부를 닦아주세요.
- Avoid exposing the charger to extreme temperatures (-10 ℃ to 50 ℃ is the operating range) or direct sunlight.
- 기기를 분해하지 마십시오. 수리는 자격을 갖춘 전문가에게 맡기십시오.
- 사용하지 않을 때에는 충전기를 서늘하고 건조한 곳에 보관하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Charger not powering on/charging. | 전원 공급이 안 되거나 케이블에 문제가 있습니다. | Ensure the USB cable is securely connected to a working power source (5V/2A). Try a different cable or power adapter. |
| Batteries show 100% on charger but low in camera. | Battery calibration issue or incompatible battery. | Ensure you are using compatible LP-E6/E6N/E6NH batteries. If the issue persists, try fully discharging and recharging the battery in the camera, then re-test with the charger. If using third-party batteries, ensure they are of good quality. |
| SD card not recognized or slow transfer. | Improper card insertion, faulty card, or driver issue. | Ensure the SD card is fully and correctly inserted. Try a different SD card. Connect the charger to a different USB port on your computer. Check if your computer's drivers are up to date. While the charger supports 25MB/s, dedicated external card readers may offer faster speeds. |
| 모바일 배터리 기능이 작동하지 않습니다. | Batteries not charged or device incompatibility. | Ensure the inserted camera batteries are sufficiently charged. Verify the external device is compatible with USB charging (5V output). |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | E6-B-CH |
| Input (USB-A) | 5V/2A |
| 입력(C형) | 5V/2A |
| Output (USB-B) | 8.4V/2A |
| 충전 출력 | 5V/(0.5A-1A) x2 |
| SD Read/Write Speed | 25MB/s R&W |
| 치수(길이 x 너비 x 높이) | 137mm x 78mm x 29mm (깊이 5.39인치 x 너비 3.07인치 x 높이 1.14인치) |
| 무게 | 100g(0.12kg) |
| 작동 온도 | -10℃ ~ 50℃ |
| 인증 | CE |
보증 및 지원
This LIFEMOI product comes with a 1년 보증 구매일로부터 제조상의 결함에 대한 보증을 제공합니다.
For any questions, technical assistance, or warranty claims, please contact our customer support team. We provide 7x24 hours email service to assist you.
연락하다: Refer to your purchase platform or the official LIFEMOI web구체적인 연락처 정보는 해당 사이트를 참조하세요.