FLEXISPOT M17A-35
FLEXISPOT 35in Standing Desk Converter User Manual
Model: M17A-35 | Brand: FLEXISPOT
1. 서론
The FLEXISPOT 35in Standing Desk Converter is designed to seamlessly integrate into your existing workspace, allowing you to effortlessly switch between sitting and standing positions. This adjustable desk riser promotes a more dynamic work environment, which can contribute to improved comfort and productivity by reducing prolonged sitting.
주요 특징:
- Fluid Workspaces: Easily converts any desk into a standing desk for adaptable postures.
- Ergonomic 2-Tier Design: Features a 35-inch wide top tier for monitors (up to 27 inches) and a 12.1-inch deep base tier for keyboards, mice, or 13-inch laptops.
- 유연한 높이 조절: Smoothly adjusts from 4.7 inches to 19.7 inches using a single-lever gas spring system.
- 높은 하중 용량: Supports up to 33 lbs on the desktop and 4.4 lbs on the keyboard tray.
- 사용 가능: Ships almost fully assembled, requiring minimal setup.
- Straight Up & Down Movement: Rises and folds vertically within its own footprint, saving space.
2. 안전 정보
본 제품을 사용하기 전에 모든 안전 지침을 읽고 이해하십시오. 지침을 따르지 않을 경우 부상이나 제품 손상이 발생할 수 있습니다.
- 중량 제한: Ensure the total weight on the desktop does not exceed 33 lbs (14.97 kg). The keyboard tray should not exceed 4.4 lbs (2 kg). Overloading can cause instability and damage.
- 작업: Use the height adjustment mechanism with care to avoid injury. Keep hands and fingers clear of moving parts during adjustment.
- 액체: Keep liquids away from the desk to prevent damage to electronic devices and the desk itself.
- 안정: Place the desk converter on a stable, flat surface. Do not lean heavily on the edges of the desk when it is raised.
3. 포함된 구성품
The FLEXISPOT Standing Desk Converter comes with the following components:
- Main Desk Riser Unit (pre-assembled)
- Optional Keyboard Tray
- 사용 설명서
그림 3.1: 이상view of the FLEXISPOT 35in Standing Desk Converter with typical setup.
Figure 3.2: Detailed dimensions and load capacities for the desktop (33 lbs) and keyboard tray (4.4 lbs).
4. 설정
The FLEXISPOT Standing Desk Converter arrives almost fully assembled, making setup quick and easy. The primary step involves attaching the optional keyboard tray.
Attaching the Keyboard Tray:
- Carefully unpack the main desk riser unit and the keyboard tray from the box.
- Locate the attachment slots on the underside of the main desk unit and the corresponding connectors on the keyboard tray.
- Slide the keyboard tray into the slots until it clicks securely into place. Ensure both sides are firmly attached.
- Verify the keyboard tray is stable before placing any items on it.
Once the keyboard tray is attached, your FLEXISPOT Standing Desk Converter is ready for use. Place it on your existing desk surface.
Figure 4.1: The desk converter is compatible with various desk shapes, including standard and L-shaped desks.
5. 사용 설명서
The FLEXISPOT Standing Desk Converter is designed for intuitive and smooth height adjustments, allowing you to easily transition between sitting and standing.
높이 조절:
- To raise the desk: Locate the single lever on the side of the desk unit. Squeeze the lever and gently lift the desktop to your desired standing height. The gas spring system will assist in the lifting motion.
- To lower the desk: Squeeze the lever and gently push down on the desktop. Guide it smoothly to your preferred sitting height.
- Release the lever at any point to lock the desk in place. The desk is designed for straight up and down movement, ensuring it stays within its original footprint.
Always ensure that cables are managed properly to avoid snagging or damage during height adjustments. The desk is stable at all heights, but avoid excessive force or leaning.
Figure 5.1: The desk offers a wide range of height adjustment for optimal ergonomic positioning.
Figure 5.2: The single-lever mechanism allows for quick and easy height adjustments.
6. 유지관리
Proper maintenance will ensure the longevity and smooth operation of your FLEXISPOT Standing Desk Converter.
청소:
- 부드러운 천으로 책상 표면을 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 강한 화학 물질은 피하세요.
- For the black finish, regular dusting will help maintain its appearance and prevent dust accumulation from being noticeable.
일반 관리 :
- 모든 나사와 연결부를 주기적으로 점검하여 단단하고 안전한지 확인하세요.
- Keep the gas spring mechanism free from obstructions and debris.
- 책상 표면에 흠집이 나거나 움푹 패일 수 있으므로 지나치게 무겁거나 날카로운 물건을 책상 위에 올려놓지 마십시오.
7. 문제 해결
다음은 몇 가지 일반적인 문제와 이에 대한 잠재적 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Desk wobbles when typing. | Uneven weight distribution or monitor placement. | Ensure monitors and other items are centered on the desktop. If using multiple monitors, try centering the primary monitor. |
| 높이 조절이 어려움. | Overload, obstruction, or mechanism issue. | Check that the weight on the desk does not exceed the maximum capacity (33 lbs). Ensure no objects are obstructing the lifting mechanism. If the issue persists, contact customer support. |
| Keyboard tray feels loose. | 부적절한 부착. | Ensure the keyboard tray is fully slid into its slots and the locking mechanisms (if any) are engaged. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 플렉스팟 |
| 모델명 | M17A-35 |
| 제품 크기(D x W x H) | 깊이 23.2인치 x 너비 34.6인치 x 높이 19.7인치 (최대 높이) |
| 색상 | 검은색 |
| 최소 높이 | 4.7인치(11.9cm) |
| 최대 높이 | 19.7인치(50cm) |
| 데스크톱 부하 용량 | 33파운드(14.97kg) |
| 키보드 트레이 적재 용량 | 4.4파운드(2kg) |
| 기구 | 가스 스프링 |
| 재료 | Metal (Steel or Aluminum) |
| 조립이 필요합니다 | Yes (Minimal, keyboard tray attachment) |
9. 보증 및 지원
The FLEXISPOT 35in Standing Desk Converter comes with a Limited Warranty. For specific details regarding your warranty coverage, please refer to the documentation included with your product or visit the official FLEXISPOT web대지.
고객 지원:
For any questions, technical assistance, or warranty claims, please contact FLEXISPOT customer support directly. You can find more information and contact details on their official store page: