HITBOX ARC200D Mini 2-in-1 Stick/Lift TIG Welder Instruction Manual

1. 안전 정보

Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or death. This section outlines general safety precautions; always refer to local safety regulations and standards.

• 전기 충격: Welding current can cause fatal electric shock. Ensure proper grounding, wear dry welding gloves, and insulate yourself from the workpiece and ground. Never touch live electrical parts.
• 연기 및 가스: Welding produces fumes and gases that can be hazardous to health. Work in a well-ventilated area or use an approved respirator. Keep your head out of the fumes.
• 아크 광선: Arc rays can burn eyes and skin. Always wear a welding helmet with appropriate shade lenses and protective clothing (long sleeves, heavy gloves). Protect bystanders with welding screens.
• 화재 및 폭발: 용접 시 발생하는 불꽃과 뜨거운 금속은 화재를 일으킬 수 있습니다. 인화성 물질을 용접 구역에서 멀리하십시오. 소화기를 즉시 사용할 수 있도록 비치하십시오.
• 번스: Hot metal and slag can cause severe burns. Wear protective clothing and allow welded materials to cool before handling.

For detailed safety information, consult relevant industry standards and local safety authorities.

2. 제품 오버view

The HITBOX ARC200D Mini is a versatile 2-in-1 welding machine designed for both MMA (Stick) welding and Lift TIG welding. It features dual voltage compatibility (110V/220V) with automatic matching, synergistic control for simplified parameter setting, and advanced functions like Hot Start, Arc Force, and Anti-Stick. Its compact and lightweight design enhances portability for various applications.

Figure 2.1: The HITBOX ARC200D Mini Welder demonstrating its 2-in-1 ARC/MMA and Lift TIG capabilities.

주요 특징:

• 2-in-1 Welding: Supports MMA (Stick) and Lift TIG welding processes.
• 듀얼볼tage: Automatically adapts to 110V or 220V input power.
• 시너지 제어: Simplifies current adjustment by automatically matching workpiece thickness and rod size.
• 고급 기능: Includes Hot Start, Arc Force, and Anti-Stick for improved arc stability and performance.
• 디지털 디스플레이: Intelligent LCD for easy operation, displaying welding current and alarm LEDs.
• 휴대성 있는 디자인: Ultra-mini and lightweight with an adjustable shoulder strap for easy transport.
• 안전 보호 : Built-in protection against overheating and overcurrent.

Figure 2.2: Front panel introduction of the ARC200D Mini, highlighting the digital display and control knob.

3. 설정

용접기를 작동하기 전에 안전과 최적의 성능을 보장하기 위해 올바른 설정이 완료되었는지 확인하십시오.

3.1 풀기 및 검사

• 용접기와 모든 부속품을 포장에서 조심스럽게 꺼내십시오.
• Inspect the machine for any visible damage that may have occurred during shipping. Do not operate if damaged.
• 포장 목록에 기재된 모든 구성품이 있는지 확인하십시오.

3.2 전원 연결

• The ARC200D Mini automatically detects and adapts to 110V or 220V input power.
• Connect the power cord to a suitable power outlet. Ensure the outlet is properly grounded and can supply the required amperage (e.g., 20A for 110V, 30A for 220V for optimal performance).
• Turn on the main power switch located on the rear of the machine. The digital display should illuminate.

3.3 용접 케이블 연결

• 접지 Clamp: 접지선을 연결하세요amp cable to the negative (-) terminal on the front panel. Securely attach the ground clamp to the workpiece or a sturdy metal workbench that is in direct contact with the workpiece. Ensure a clean, bare metal connection for good conductivity.
• 전극 홀더(MMA): For MMA (Stick) welding, connect the electrode holder cable to the positive (+) terminal on the front panel. Insert the welding electrode into the holder.
• TIG 토치(리프트 TIG): For Lift TIG welding, connect the TIG torch (not included) to the negative (-) terminal. Connect the ground clamp to the positive (+) terminal. Ensure the TIG torch has a gas connection if using shielding gas (though Lift TIG can be performed without gas for certain applications).

4. 사용 설명서

The ARC200D Mini offers two welding modes: MMA (Stick) and Lift TIG.

4.1 MMA(스틱) 용접

• 모드 선택: The machine defaults to MMA mode. If in Lift TIG mode, press the control knob for 5 seconds to switch back.
• 현재 조정: Rotate the control knob to adjust the welding current. The synergistic function will assist in setting appropriate parameters based on the selected electrode size (1.6mm to 3.2mm, or 1/8 inch). The LCD will display the current.
• 핫 스타트 : This function provides an initial surge of current to help ignite the arc easily, especially with difficult-to-start electrodes. It is automatically engaged.
• 아크 포스: This feature automatically increases the current when the arc length becomes too short, preventing the electrode from sticking to the workpiece. It is automatically engaged.
• 달라붙지 않음: If the electrode does stick, the Anti-Stick function reduces the current to prevent overheating and allow for easy removal of the electrode.
• 용접 절차: Hold the electrode at a slight angle to the workpiece. Strike the arc by lightly touching and quickly lifting the electrode. Maintain a consistent arc length and travel speed to create a uniform weld bead.

4.2 리프트 TIG 용접

Lift TIG welding provides a cleaner weld and more precise control compared to MMA, especially for thinner materials.

• 모드 선택: To activate Lift TIG mode, press and hold the control knob for approximately 5 seconds until the display indicates TIG mode.
• 현재 조정: Rotate the control knob to set the desired welding current for TIG.
• 용접 절차: With the TIG torch connected and the tungsten electrode installed, gently touch the tungsten to the workpiece. Lift the tungsten slightly (approximately 1-3mm) to initiate the arc. Maintain a consistent arc length and feed filler rod (if required) into the weld puddle.
• Gas Shielding: For optimal TIG welding results, use an inert shielding gas (e.g., Argon) with a TIG torch equipped for gas flow. Connect the gas hose from the regulator to the TIG torch.

5. 유지관리

Regular maintenance ensures the longevity and reliable operation of your HITBOX ARC200D Mini welder.

• 청소: Periodically clean the exterior of the machine with a dry, soft cloth. Use compressed air to blow out dust and debris from the ventilation openings, ensuring the cooling fan operates efficiently. Perform this with the power disconnected.
• 케이블 검사: 용접 케이블, 전극 홀더 및 접지선을 정기적으로 점검하십시오.amp for damage, fraying, or loose connections. Replace any damaged components immediately.
• 터미널 연결: Ensure all cable connections to the welder terminals are tight and secure. Loose connections can cause overheating and poor performance.
• 저장: Store the welder in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.

6. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대한 해결책을 제공합니다.

The ARC200D Mini has built-in protection against overheating and overcurrent. If an alarm LED illuminates, allow the machine to cool or check for obstructions before resuming operation.

7. 사양

Detailed technical specifications for the HITBOX ARC200D Mini Welder.

Figure 7.1: Product parameters and dimensions of the ARC200D Mini.

Figure 7.2: The compact size and weight of the ARC200D Mini, weighing 4.4 lbs.

8. 보증 및 지원

HITBOX stands behind the quality of its products.

8.1 보증 정보

All HITBOX products, including the ARC200D Mini Welder, come with a 1년 보증 from the date of purchase. This warranty covers manufacturing defects and ensures that your product performs as intended under normal use.

The warranty does not cover damage caused by misuse, unauthorized modifications, improper maintenance, or normal wear and tear.

8.2 고객 지원

If you encounter any problems with your HITBOX ARC200D Mini Welder or have questions regarding its operation, please contact HITBOX customer support. Our team is committed to providing efficient after-sales service and will respond to inquiries within 24 hours.

Please have your product model number (ARC200D) and purchase details ready when contacting support to facilitate a quicker resolution.