Maxxima MRL-S41555S

Maxxima 4-Inch Trimless Ultra-Thin Square Recessed LED Downlight

Model: MRL-S41555S

소개

Thank you for choosing the Maxxima 4-inch Trimless Ultra-Thin Square Recessed LED Downlight. This product is designed to provide efficient and versatile lighting with a seamless, integrated appearance. Featuring 5 selectable color temperatures (CCT) and dimmable functionality, this downlight is suitable for various residential and commercial applications. This manual provides essential information for safe installation, operation, and maintenance.

안전 정보

  • 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
  • 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
  • 모든 전기 연결이 올바르고 안전하게 이루어졌는지 확인하십시오.
  • 제품을 개조하지 마십시오. 개조 시 보증이 무효화되고 안전상의 위험이 발생할 수 있습니다.
  • d에 적합amp 그리고 젖은 위치.
  • 절연체와의 직접 접촉에 대한 IC 등급입니다.
  • ETL Listed for safety and quality assurance.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

  • 4-inch Trimless Square Recessed LED Downlight
  • Integrated Junction Box (J-Box)
  • 석고 프레임
  • 사용 설명서
Maxxima 4-inch trimless square recessed LED downlight with integrated J-box

Image: Maxxima 4-inch trimless square recessed LED downlight with its integrated junction box.

명세서

특징사양
모델 번호MRL-S41555S
크기4 인치
광속1000루멘
왓tage15 와트
권tage120VAC
색온도(CCT)2700K/3000K/3500K/4000K/5000K Selectable
연색지수(CRI)90
조광 범위20% - 100%
빔 스프레드38°
평생 시간50,000시간
재료알류미늄
인증ETL 등록됨
정착물 차원6.4" W x 6.4" L x 4" D
J-Box Dimensions길이 4인치 x 너비 2.5인치 x 깊이 1.5인치
Technical drawing with dimensions of the 4-inch trimless square recessed LED downlight

Image: Dimensions of the Maxxima 4-inch trimless square recessed LED downlight.

설치 지침

메모: No ceiling can or housing is required for this trimless downlight. Always ensure power is disconnected before installation.

  1. 잘라낼 부분을 준비하세요: Create a suitable opening in the ceiling for the plaster frame. Refer to the product dimensions for accurate sizing.
  2. Install the Plaster Frame: Insert the plaster frame into the new cutout. Secure the plaster frame to the sheetrock using appropriate screws. This frame will be plastered and painted over to achieve a seamless, trimless look.
Diagram showing how to screw the plaster frame to sheetrock for a frameless recessed design

Image: Diagram illustrating the installation of the plaster frame to the sheetrock.

  1. Plaster and Paint: Once the plaster frame is securely installed, plaster and paint over it to blend it with the ceiling surface. Allow sufficient drying time.
  2. Connect the Junction Box: Feed the integrated junction box through the plaster frame opening. Make the necessary electrical connections inside the J-Box according to local electrical codes. Ensure the J-Box is accessible for future servicing if required.
  3. Install the Downlight Fixture: Connect the downlight fixture to the junction box cable. Carefully insert the downlight fixture into the plaster frame opening. Twist and lock the fixture into place using the integrated twist locks. This secures the light and completes the trimless installation.
Close-up of hands installing the downlight fixture into the plaster frame using twist locks

Image: Securing the downlight fixture into the plaster frame using twist locks.

작동 지침

색온도(CCT) 선택:

  • The downlight features a selectable CCT switch located on the back of the fixture.
  • Before final installation (or by carefully accessing the back of the fixture if already installed), slide the switch to choose your desired color temperature: 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
Image illustrating the 5 CCT selectable options and the switch on the back of the fixture

Image: CCT selection switch and available color temperatures.

디밍 기능:

  • This downlight is dimmable from 20% to 100% with compatible LED dimmers.
  • For optimal performance, use a 150W max LED dimmer by Maxxima or other compatible LED dimmers.

유지

  • 청소하기 전에 전원이 차단되었는지 확인하세요.
  • Clean the fixture with a soft, dry, or slightly damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
  • The integrated LED does not require bulb replacement.

문제 해결

문제가능한 원인해결책
불이 켜지지 않습니다조명기구에 전원이 공급되지 않음; 배선이 헐거움; 스위치 고장Check circuit breaker; Verify wiring connections; Test switch functionality
불빛이 깜빡인다Incompatible dimmer; Loose wiring; Overloaded circuitEnsure dimmer is LED compatible; Check wiring; Reduce load on circuit
잘못된 색온도CCT 스위치 설정이 잘못되었습니다Adjust the CCT switch on the back of the fixture

보증

This Maxxima product comes with a 3년 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

지원하다

For technical assistance, troubleshooting, or product inquiries, please visit the official Maxxima website or contact their customer support team. Refer to the product packaging or Maxxima's web최신 연락처 정보는 사이트에서 확인하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.