HelloBaby Monitor Mount User Manual

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your HelloBaby Monitor Mount. This flexible mount is specifically designed for use with HelloBaby monitor cameras, including models HB65, HB66, HB6250, HB6550, and HB6339. It offers a versatile solution for positioning your baby monitor without the need for tools or causing damage to walls or furniture.

설치하기 전에 이 설명서를 자세히 읽고 나중에 참고할 수 있도록 보관하세요.

안전 정보

• Ensure the mount is securely attached to a stable surface to prevent the camera from falling.
• Keep the monitor mount and camera power cords out of reach of children to avoid strangulation hazards.
• Do not place the mount or camera directly above the baby's sleeping area. Position it to the side, ensuring a clear view.
• Regularly check the mount's stability and the camera's attachment.
• 본 제품은 실내에서만 사용하도록 설계되었습니다.

패키지 내용

모든 구성 요소가 있는지 확인하세요.

• 1 x HelloBaby Flexible Monitor Mount

Note: Baby monitor camera is sold separately.

설치 지침

Follow these steps to install your HelloBaby Monitor Mount:

1. 카메라 부착: Locate the 1/4-inch screw on the mount. Align the screw with the threaded hole on the bottom of your HelloBaby monitor camera. Twist the camera clockwise onto the screw until it is securely fastened. Ensure the camera is stable and does not wobble.



2. 마운트 위치 지정: Identify a suitable location such as a crib railing, shelf, or metal pole. The flexible gooseneck design allows it to wrap around various surfaces.
3. 마운트를 고정하세요: Bend and rotate the flexible gooseneck to wrap it firmly around the chosen surface. Ensure the mount is tight and stable, preventing any movement or slippage. The mount should be positioned so that the camera has a clear and unobstructed view 원하는 지역의.



4. 카메라 각도 조정: Once the mount is secure, adjust the camera's angle to achieve the optimal viewing perspective of your infant.

작동 지침

The HelloBaby Monitor Mount is designed for ease of use and flexibility:

• 조정 View: To change the camera's position or angle, gently bend and reshape the flexible gooseneck. Always ensure the mount remains securely attached to its surface after adjustment.
• 재배치: If you need to move the camera to a different location, carefully unwrap the mount from its current position and re-secure it at the new desired spot following the setup instructions.

유지

• 청소: 부드러운 천으로 마운트를 닦아주세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 점검: Periodically inspect the mount for any signs of wear or damage. If any damage is observed, discontinue use and replace the mount.

문제 해결

Issue: Mount is not stable or slips.

해결책: Ensure the gooseneck is wrapped tightly around the surface. Try repositioning it on a surface with better grip. Avoid overly smooth or narrow surfaces that may not provide adequate friction.

Issue: Camera view 방해된다.

해결책: Adjust the gooseneck to change the camera's position. Ensure no crib bumpers, blankets, or other objects are blocking the camera's line of sight.

Issue: Camera feels loose on the mount.

해결책: Tighten the camera onto the 1/4-inch screw by twisting it clockwise until it is firm. Do not overtighten.

명세서

보증 및 지원

For warranty information and customer support, please refer to the official HelloBaby web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

You can visit the official HelloBaby store for more products and support: HelloBaby Official Store