Einhell Cordless Angle Grinder TE-AG 18/125 CE Q Li Instruction Manual

1. 서론

The Einhell TE-AG 18/125 CE Q Li cordless angle grinder is a versatile and powerful tool designed for a variety of tasks including grinding, cutting, roughing, and polishing. As part of the Einhell Power X-Change family, this tool offers cordless freedom and compatibility with all Power X-Change batteries and chargers. It features a robust PurePOWER brushless motor for extended runtime and power, constant electronics for stable performance, and a quick-fix nut for easy disc changes. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Figure 1: The Einhell Power X-Change ecosystem, highlighting battery compatibility across various tools.

2. 안전 지침

Always observe the following safety precautions when operating the angle grinder to prevent injury and damage.

• 개인 보호 장비(PPE)를 착용하세요: Always wear safety goggles, hearing protection, and work gloves. A dust mask is recommended for dusty operations.
• 안전한 작업물: 공작물이 단단히 고정되었는지 확인하십시오.amp작동 중 움직임을 방지하기 위해 고정되거나 단단히 고정되어 있습니다.
• 적절한 그립: Maintain a firm grip on the tool with both hands, using the additional handle provided.
• 디스크 상태 확인: Before each use, inspect the grinding or cutting disc for cracks, chips, or damage. Replace damaged discs immediately.
• Correct Disc Type: Use only discs appropriate for the material and task. Ensure the disc's maximum RPM rating is higher than the tool's maximum speed.
• Adjust Disc Guard: Position the disc guard to provide maximum protection for the operator and to deflect sparks away from the body.
• 역류를 방지하세요: Be aware of potential kickback, especially when cutting. Maintain a stable stance and avoid binding the disc in the workpiece.
• 작업 영역 정리: Keep the work area clean and well-lit. Remove any flammable materials.
• 배터리 안전: Use only Einhell Power X-Change batteries and chargers. Do not expose batteries to heat or water.
• 과부하 보호: The tool is equipped with overload protection. If the tool stops, reduce pressure or allow it to cool down before resuming.
• 재시작 보호: The tool features restart protection to prevent accidental startup after a power interruption or battery change.

3. 구성 요소 이상view

Familiarize yourself with the main components of your Einhell Cordless Angle Grinder:

• Brushless Motor (PurePOWER): Provides high power and efficiency with minimal maintenance.
• 스핀들 잠금 버튼: For securing the spindle during disc changes.
• Quick-Fix Nut: Allows for tool-free and rapid changing of grinding/cutting discs.
• Quick-Adjust Disc Guard: Protects against sparks and debris, adjustable without tools.
• 추가 핸들: Can be mounted in two positions for optimal control and comfort.
• 가변 속도 제어 다이얼: Adjusts the rotational speed (3000-10500 RPM) for different materials.
• LED 속도 표시: Indicates the selected speed setting.
• Dust Protection Grid: Integrated grid protects the tool's interior from dust and debris, removable for cleaning.
• 배터리 인터페이스: For connecting Power X-Change batteries.

4. 설정

4.1 배터리 설치

Ensure the battery is fully charged before use. The angle grinder is sold without a battery or charger, which must be purchased separately as part of the Power X-Change system.

1. Align the battery with the battery interface on the tool.
2. 딸깍 소리가 날 때까지 배터리를 제자리에 밀어 넣습니다.
3. 분리하려면 배터리의 분리 버튼을 누르고 밀어서 빼내십시오.

Figure 2: Illustration indicating that the battery and charger are not included with the tool and must be purchased separately.

4.2 Disc Installation and Guard Adjustment

The angle grinder accepts cutting discs up to 125 mm in diameter.

1. 도구의 전원이 꺼져 있고 배터리가 제거되어 있는지 확인하세요.
2. 스핀들 잠금 버튼을 길게 누릅니다.
3. Unscrew the quick-fix nut by hand (or using a spanner if necessary, though it's designed for tool-free operation).
4. 원하는 연삭 또는 절단 디스크를 플랜지 위에 놓고 중앙에 오도록 위치시키십시오.
5. Screw the quick-fix nut back on and tighten it firmly by hand. Release the spindle lock button.
6. Adjust the quick-adjust disc guard to ensure maximum protection for your hands and body, deflecting sparks away from you.

Figure 3: Detail of the quick-fix nut mechanism for fast and tool-free disc changes.

4.3 Additional Handle Attachment

The additional handle can be screwed into either of the two mounting positions on the gear head for comfortable and secure two-hand operation.

5. 사용 설명서

5.1 전원 켜기/끄기

1. To switch on, slide the ON/OFF switch forward.
2. To switch off, release the ON/OFF switch. The tool will stop.

5.2 가변 속도 제어

The integrated variable speed control allows you to adjust the rotational speed between 3000 and 10500 RPM, optimizing performance for different materials and applications. The constant electronics feature ensures that the selected speed is maintained even under load.

1. Use the speed control dial to select the desired RPM.
2. Refer to the LED speed display for the current setting.
3. Lower speeds are generally suitable for polishing or working with sensitive materials, while higher speeds are for aggressive grinding and cutting.

Figure 4: Close-up of the variable speed control dial, allowing precise speed adjustment.

Figure 5: The LED display showing speed settings and an overload indicator for safe operation.

5.3 일반적인 사용 팁

• 공구가 작업물에 닿기 전에 최대 속도에 도달하도록 하세요.
• Apply moderate pressure; excessive force can lead to overheating, reduced performance, and disc damage.
• Move the tool smoothly and consistently across the workpiece.
• For cutting, use a cutting disc and make shallow passes to avoid binding.
• For grinding, hold the disc at a slight angle to the workpiece.

Figure 6: An operator using the Einhell angle grinder for a cutting application, demonstrating proper safety gear and technique.

6. 유지관리

정기적인 유지보수는 앵글 그라인더의 수명과 최적의 성능을 보장합니다.

6.1 청소

• 청소하기 전에는 항상 배터리를 제거하세요.
• 도구 외부를 부드러운 천으로 닦으세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• The integrated dust protection grid can be easily removed for cleaning. Regularly clean it to prevent dust buildup and ensure proper air circulation.
• Use compressed air to clear ventilation slots and internal components of dust and debris.

Figure 7: Close-up of the removable dust protection grid, designed to shield internal components from debris.

6.2 보관

Store the angle grinder in a dry, secure place, out of reach of children. Remove the battery before storing for extended periods.

7. 문제 해결

다음은 몇 가지 일반적인 문제와 이에 대한 잠재적 해결책입니다.

8. 사양

9. 보증 및 지원

Einhell provides a 10-year guarantee on the PurePOWER brushless motor upon online registration. For detailed warranty information, product registration, or technical support, please visit the official Einhell web해당 웹사이트를 방문하거나 가까운 대리점에 문의하십시오. 구매 영수증은 구매 증빙 자료로 보관하십시오.