1. 서론
This manual provides essential information for the safe and efficient use of your Brother CE1150 Computerized Sewing Machine. Please read all instructions carefully before operating the machine to ensure proper setup, operation, and maintenance. Keep this manual in a safe place for future reference.
그림 1: 전면 view of the Brother CE1150 Computerized Sewing Machine.
2. 설정
2.1 포장 풀기 및 배치
- 기계를 포장에서 조심스럽게 꺼내세요.
- Place the machine on a stable, level surface. Ensure adequate space around the machine for comfortable operation.
2.2 전원 연결
- 전원 코드를 기기에 연결한 다음 적절한 전기 콘센트에 꽂으십시오.
- Ensure the power switch is in the 'OFF' position before connecting.
2.3 보빈 와인딩
- 실패꽂이에 실패를 놓습니다.
- Follow the winding path indicated on the machine for bobbin winding.
- Place an empty bobbin onto the bobbin winder shaft and push it to the right.
- 북실을 감기 위해 재봉틀을 작동시키세요. 북실이 가득 차면 멈추세요.
2.4 상부 스레딩
- 노루발 레버를 올립니다.
- Follow the numbered threading path on the machine, ensuring the thread is correctly seated in all guides and the take-up lever.
- Use the automatic needle threader for easy needle threading.
2.5 Drop-in Top Bobbin Installation
- 북실 덮개판을 여세요.
- Insert the wound bobbin into the bobbin case with the thread unwinding in the correct direction (usually counter-clockwise).
- Guide the thread through the tension slot and pull out a few inches of thread.
- 보빈 덮개판을 교체하세요.
그림 2: 상단 view illustrating thread spool placement and bobbin area.
3. 사용 설명서
3.1 제어판 및 LCD 디스플레이
- The LCD display shows the selected stitch number, recommended presser foot, and stitch length/width settings.
- Use the stitch selector buttons to navigate through the 110 unique built-in stitches and 8 styles of 1-step auto-size buttonholes.
- Adjust stitch length and width using the dedicated buttons as needed for your project.
그림 3: 상세 view of the LCD display and stitch selection chart.
3.2 Sewing Speed Control
- The machine features a pre-set speed control allowing you to set a maximum sewing speed of up to 410 stitches per minute (spm).
- Adjust the speed slider for precise control, especially for intricate work or for beginners.
3.3 노루발 교체
- Ensure the needle is in its highest position and the power is off.
- Press the black button on the back of the presser foot holder to release the current foot.
- 새 노루발을 홀더에 맞추고 딸깍 소리가 나면서 제자리에 고정될 때까지 노루발 레버를 아래로 내리세요.
- The machine includes 7 sewing feet: buttonhole, zipper, button sewing, overcasting, blindstitch, monogramming, and zigzag feet.
3.4 자유 팔 사용하기
- Remove the accessory storage compartment to expose the free arm.
- The smaller free arm is ideal for sewing cylindrical items such as cuffs, sleeves, and pant hems.
Figure 4: The free arm feature for sewing small, circular items.
3.5 LED Workspace Lighting
- The super-bright LED-lit workspace provides clear visibility for all your sewing projects.
4. 유지관리
4.1 기계 청소
- Regularly clean lint and dust from the bobbin case area and feed dogs using the brush provided or a small, soft brush.
- 청소하기 전에 기계의 플러그가 뽑혀 있는지 확인하세요.
4.2 바늘 교체
- Replace the needle frequently, especially when sewing different fabric types or if the needle becomes bent or dull.
- Use the screwdriver to loosen the needle clamp screw, remove the old needle, insert a new one with the flat side facing the back, and tighten the screw.
5. 문제 해결
재봉틀 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 건너뛴 스티치 | 잘못된 바늘, 구부러진 바늘, 실 끼우기 부적절함. | 바늘을 올바른 종류/크기로 교체하고, 재봉틀에 다시 실을 끼우고, 바늘이 완전히 삽입되었는지 확인하십시오. |
| 실 끊기 | Incorrect tension, poor quality thread, needle bent or dull, improper threading. | Adjust tension, use good quality thread, replace needle, re-thread machine. |
| 고르지 못한 스티치 | 장력 불량, 북실 감기 불량, 원단 이송 불량. | Adjust tension, re-wind bobbin, ensure presser foot pressure is appropriate for fabric. |
For more detailed troubleshooting, please refer to the comprehensive guide available on the Brother support web대지.
6. 사양
- 모델: CE1150
- 스티치: 110 unique built-in sewing stitches
- 단추구멍: 8 styles of 1-step auto-size buttonholes
- 재봉 속도: Up to 410 stitches per minute (spm)
- 표시하다: LCD 디스플레이 화면
- 작업 공간: Super-bright LED-lit
- 바늘 끼우기: Advanced automatic needle threader
- 실패: Jam-resistant drop-in top bobbin
- Included Feet: 7 sewing feet (buttonhole, zipper, button sewing, overcasting, blindstitch, monogramming, zigzag)
- 치수: 19.2 x 10.6 x 15.8 인치
- 품목 무게: 13.75파운드
- 제조업체: Brother Sewing
7. 보증 및 지원
7.1 보증 정보
This Brother CE1150 Computerized Sewing Machine is a renewed product backed by a 1-year warranty. Please retain your proof of purchase for warranty claims.
7.2 고객 지원
For further assistance, technical support, or to inquire about service, please visit the official Brother support web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제조업체의 web사이트 또는 원래 제품 포장에 보관하십시오.