XOSS XR01 Bicycle Tail Light User Manual

소개

구매해주셔서 감사합니다asing the XOSS XR01 Bicycle Tail Light. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.

Image: XOSS XR01 Smart Tail Light with its main features.

패키지 내용

모든 품목이 들어 있는지 확인하려면 패키지를 확인하세요.

• XOSS XR01 Tail Light x 1
• Saddle Bracket x 1
• Seatpost Bracket x 1
• Type-C 충전 케이블 x 1
• 고무밴드 x 1
• Fastening Bands x 4
• 사용 설명서 x 1

이미지: 상세 view of the XOSS XR01 package contents.

설정 및 설치

The XOSS XR01 supports two easy installation methods without requiring any tools.

1. Seatpost Mount

1. Attach the seatpost bracket to your bicycle's seatpost.
2. Secure the bracket using the provided rubber band.
3. Slide the XOSS XR01 tail light onto the mounted bracket until it clicks into place.

2. Saddle Mount

1. Attach the saddle bracket to the rails under your bicycle saddle.
2. Secure the bracket using the provided fastening bands.
3. Slide the XOSS XR01 tail light onto the mounted bracket until it clicks into place.

Image: XOSS XR01 tail light installed on a seatpost.

Image: Installation diagrams for seatpost and saddle mounts.

작동 지침

전원 켜기/끄기

• 전원을 켜려면: 전원 버튼을 2초간 길게 누르세요.
• 전원을 끄려면: 전원 버튼을 2초간 길게 누르세요.

모드 전환

• While the light is on, short press the power button to cycle through different lighting modes.
• The device features mode memory, automatically recalling the last used mode when powered on.

자동 켜짐/꺼짐 기능

The XR01 is equipped with an intelligent vibration sensor:

• The light automatically turns on when vibration (movement) is detected.
• If no movement is detected for 30 seconds, the light will automatically turn off to conserve battery.

Image: Automatic On/Off feature in action.

Smart Brake Sensor

The built-in brake sensor enhances safety by detecting deceleration:

• When braking is detected, the tail light automatically illuminates at its maximum brightness.
• This alerts vehicles and pedestrians behind you, significantly improving your visibility and safety.

Image: The XOSS XR01 tail light with its smart brake sensor activated.

Video: Demonstration of the XOSS XR01 bicycle tail light's features, including automatic on/off and brake sensing.

충전 중

The XOSS XR01 uses a convenient Type-C charging interface.

• Connect the provided Type-C charging cable to the tail light and a USB power source (e.g., computer, wall adapter).
• 완전 충전에는 약 1시간이 걸립니다.
• The light will indicate charging status (e.g., solid light while charging, off when fully charged).

Image: Charging the XOSS XR01 tail light with a Type-C cable.

명세서

유지

• 청소: 부드러운 천으로 꼬리등을 닦아주세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 방수 기능: The device is IPX6 waterproof, meaning it is protected against powerful water jets. It can withstand heavy rain but should not be submerged in water.
• 저장: Store the tail light in a cool, dry place when not in use for extended periods. Charge the device periodically (e.g., every 3 months) to maintain battery health.
• 배터리 관리 : 배터리 수명을 연장하려면 배터리를 자주 완전히 방전시키지 마세요.

Image: XOSS XR01 tail light demonstrating its IPX6 waterproof capability.

문제 해결

• 불이 켜지지 않음: 배터리가 충전되어 있는지 확인하십시오. 전원 버튼을 2초 동안 길게 눌러 전원을 켜십시오.
• 자동 켜기/끄기가 작동하지 않습니다: Check if the device is securely mounted and if there is sufficient vibration to trigger the sensor. Ensure the auto-on feature is enabled (if applicable, refer to mode switching).
• 브레이크 센서가 반응하지 않음: Ensure the light is firmly attached and positioned correctly. The sensor relies on deceleration to activate.
• 짧은 배터리 수명: Ensure the device is fully charged. Battery life can vary based on the selected lighting mode. Extreme temperatures can also affect battery performance.
• 충전 문제: Try a different Type-C cable or USB power source. Ensure the charging port is clean and free of debris.

보증 및 지원

For warranty information and customer support, please refer to the official XOSS web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.