COMPUTHERM Q20RF Wireless Programmable Room Thermostat

1. 서론

Thank you for choosing the COMPUTHERM Q20RF Wireless Programmable Room Thermostat. This device is designed to provide precise and efficient control over your heating and air conditioning systems. It features daily independent programming, temporary manual modes, and a clear backlit display for optimal comfort and energy savings. Please read this manual carefully before installation and operation to ensure proper use and to maximize the benefits of your new thermostat.

2. 안전 정보

• 전기 안전: Installation and wiring should only be performed by a qualified electrician or service technician. Ensure the main power supply to the heating/cooling system is turned off before any wiring work.
• 배터리 취급: The thermostat unit requires 2 AA batteries. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly according to local regulations.
• 놓기: Install the thermostat in a location away from direct sunlight, drafts, or heat sources that could affect temperature readings.
• 청소: 세척에는 부드럽고 마른 천을 사용하십시오. 연마성 세척제나 용매를 사용하지 마십시오.
• 어린이들: 우발적인 사고를 방지하기 위해 장치를 어린이의 손이 닿지 않는 곳에 보관하십시오.amp에링.

3. 패키지 내용

패키지에 모든 구성 요소가 들어 있는지 확인하세요.

• COMPUTHERM Q20RF Thermostat Unit (Transmitter)
• COMPUTHERM Q20RF Receiver Unit
• Mounting Support / Stand for Thermostat Unit
• Connection Cables/Wires
• 사용 설명서 (본 문서)
• 2 AA Batteries (may be included or sold separately)

4. 설정 및 설치

4.1. Thermostat Unit (Transmitter)

The thermostat unit is portable and can be placed on its mounting stand in any room where you want to measure and control the temperature. It requires 2 AA batteries for operation.

1. 배터리 삽입: Open the battery compartment on the back of the thermostat unit and insert 2 AA batteries, observing the correct polarity.
2. 놓기: Place the thermostat unit on its stand in a central location in the room, away from direct heat sources, drafts, or direct sunlight.

4.2. 수신기 장치 설치

The receiver unit connects directly to your heating or cooling system. This installation should be performed by a qualified professional.

1. 전원 끄기 : Ensure the main power supply to your heating/cooling system is completely turned off before proceeding.
2. 설치: Mount the receiver unit in a suitable location near your heating/cooling system, ensuring good signal reception from the thermostat unit.
3. 배선: Connect the receiver unit to your heating/cooling system using the provided connection cables according to the wiring diagram specific to your system. Refer to the detailed wiring instructions provided with your heating/cooling appliance or consult a professional. The receiver unit operates on 230 Volts.
4. 전원 켜기: Once wiring is complete and secure, restore power to your heating/cooling system.

4.3. Pairing (Wireless Connection)

The thermostat unit and receiver unit are typically pre-paired at the factory. If they are not communicating, follow the pairing instructions in the full manual or contact support.

5. 사용 설명서

5.1. 디스플레이 및 버튼

The large display shows current time, set temperature, room humidity, and room temperature. The display features a backlight with adjustable brightness. Buttons activate an acoustic signal when touched.

5.2. 작동 모드

The thermostat allows easy switching between various modes:

• 가열 모드: 실내 온도가 설정 온도 이하로 떨어지면 난방 시스템을 활성화합니다.
• 냉각 모드: 실내 온도가 설정 온도보다 높아지면 냉각 시스템을 작동시킵니다.
• 가습 모드: Controls a humidifier to increase room humidity.
• 제습 모드: Controls a dehumidifier to reduce room humidity.

The thermostat also features a humidity limit for cooling. This function allows you to set a humidity level above which the thermostat will stop cooling to prevent condensation.

5.3. Programming Daily Schedules

You can create independent daily programs for each day of the week. For each day, in addition to a fixed switching time, 10 freely adjustable switching times can be set. A different temperature and humidity can be assigned to each switching time.

1. Access the programming menu (refer to the full manual for specific button sequences).
2. 프로그래밍하려는 요일을 선택하세요.
3. Set up to 10 switching times and their corresponding desired temperature and humidity levels.
4. 필요에 따라 다른 날에도 반복합니다.

5.4. Manual Modes

• 임시 수동 모드: Allows you to override the current program setting for a specified duration (1 to 99 hours or 1 to 99 days) until the next programmed switching time.
• 영구 수동 모드: Maintains a constant temperature setting, overriding all programmed schedules until manually changed.

5.5. 고급 설정

• Selectable Switching Sensitivity: Adjust the temperature differential before the system activates (e.g., 0.1°C, 0.2°C).
• Temperature and Humidity Sensor Calibration: Allows for fine-tuning the sensor readings if they appear inaccurate.
• Pump Protection Function: Periodically activates the pump to prevent seizing during long periods of inactivity.

6. 유지관리

6.1. 배터리 교체

The thermostat unit will indicate low battery power on its display. Replace the 2 AA batteries promptly to ensure continuous operation. Always use new, high-quality alkaline batteries.

6.2. 청소

Wipe the thermostat and receiver units with a soft, dry, or slightly damp cloth. Do not use chemical cleaners, abrasives, or solvents, as these can damage the plastic casing 및 전자 부품.

7. 문제 해결

If you encounter issues with your COMPUTHERM Q20RF thermostat, try the following steps:

• No Display / Unit Not Responding: Check if the batteries in the thermostat unit are correctly inserted and have sufficient charge. Replace them if necessary.
• 난방/냉방이 작동하지 않음:
  • Ensure the receiver unit has power.
  • Verify the thermostat is in the correct operating mode (Heating/Cooling).
  • Check the set temperature; it must be above (for heating) or below (for cooling) the current room temperature to trigger the system.
  • Confirm the thermostat and receiver units are paired and within wireless range.
• 부정확한 온도 측정: Consider calibrating the temperature sensor through the advanced settings menu. Ensure the thermostat is not exposed to drafts, direct sunlight, or other heat sources.
• 프로그래밍 문제: Review the programming steps in the manual. Ensure the current time and day are set correctly.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

8. 사양

9. 보증

COMPUTHERM products are designed for reliability and user-friendliness. This product is covered by a manufacturer's warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary by region. Please retain your proof of purchase for warranty claims.

Information regarding the availability of spare parts is not provided. For detailed warranty information, please refer to the documentation included with your purchase or contact the manufacturer directly.

10. 고객 지원

For further assistance, technical support, or warranty inquiries, please contact the manufacturer:

• 제조업체: Quantrax LTD
• Web대지: Please visit the official COMPUTHERM web연락처 정보와 추가 자료는 해당 사이트를 참조하세요.
• 유통 : CalorSol GmbH (for specific regions, check your purchase details)

When contacting support, please have your product model number (Q20RF) and proof of purchase readily available.