DEWALT ToughSeries 25ft Illuminated Tape Measure (DWHT35625S)

소개

The DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S) is engineered for durability and enhanced visibility in demanding work environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tape measure.

그림 1: 전면 view of the DEWALT ToughSeries 25ft Illuminated Tape Measure.

설정

초기 충전

Before first use, fully charge the integrated LED battery. The tape measure includes a USB charging cable for convenience.

• Locate the USB charging port on the side of the tape measure.
• Connect the provided USB cable to the tape measure and a compatible USB power source (e.g., wall adapter, computer USB port).
• 충전 중에는 충전 표시등이 켜집니다.
• Allow approximately 3 hours for a full charge. A full charge provides up to 3 hours of continuous LED runtime.

Figure 2: The DEWALT ToughSeries tape measure showing the included USB charging cable.

Figure 3: The tape measure connected to a power source for charging.

작동 지침

블레이드 확장 및 축소

• To extend the blade, pull the end hook away from the case.
• To retract the blade, release the end hook and allow the blade to smoothly return into the case. Guide the blade to prevent rapid retraction.

Using the Slide Lock

• To lock the blade at a desired measurement, push the slide lock button forward.
• 잠금을 해제하려면 슬라이드 잠금 버튼을 뒤로 당기세요.

Activating the LED Light

The integrated LED light illuminates the measurement area for improved visibility in low-light conditions.

• Press the LED power button (typically located near the blade opening) to turn the light on.
• 버튼을 다시 누르면 불이 꺼집니다.
• The LED features an automatic shut-off function after 60 seconds of inactivity to conserve battery life.

Figure 4: The LED light illuminates the measurement area for clear readings.

측정값 읽기

The tape measure features a double-sided blade print, allowing for easy reading from various angles, including overhead measurements.

Figure 5: The double-sided blade print facilitates overhead measurements.

유지

청소

• Regularly wipe the blade and case with a clean, damp 먼지와 이물질을 제거하는 천.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the blade markings or case finish.
• Ensure the blade is dry before fully retracting it into the case to prevent rust.

배터리 관리

• Recharge the battery when the LED light dims or fails to illuminate.
• 장기간 보관하려면 배터리를 약 50%까지 충전하고 서늘하고 건조한 곳에 보관하세요.

저장

• Store the tape measure in a dry environment, away from extreme temperatures.
• The ToughSeries design provides a 100ft drop rating, but proper storage helps prolong the tool's lifespan.

문제 해결

LED 조명이 작동하지 않음

• 배터리 잔량 확인: The battery may be depleted. Connect the tape measure to a USB power source and allow it to charge for at least 30 minutes before attempting to use the LED again.
• Ensure Proper Activation: Press the LED power button firmly.

Blade Does Not Retract Smoothly

• 블레이드 청소: Dust, dirt, or debris on the blade can hinder retraction. Extend the blade fully and carefully wipe it clean with a damp 옷감.
• 장애물 확인: Inspect the blade opening for any foreign objects that might be blocking the blade's path.

Slide Lock Not Engaging/Disengaging

• 잔해물 청소: Ensure no debris is lodged around the slide lock mechanism.
• 적절한 작동: Confirm you are pushing the slide lock fully forward to engage and fully backward to disengage.

명세서

보증 정보

DEWALT products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official DEWALT web사이트를 방문하거나 고객 지원팀에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

고객 지원

For technical assistance, replacement parts, or further inquiries regarding your DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S), please visit the official DEWALT website or contact their customer service department. When contacting support, please have your model number (DWHT35625S) and purchase details readily available.