WORKPRO 12V 무선 잔디깎이 및 관목 트리머 사용 설명서

소개

The WORKPRO 12V Cordless Grass Shear & Shrubbery Trimmer is a versatile 2-in-1 handheld tool designed for efficient garden maintenance. Powered by a 12V high-performance DC motor and a 2.0Ah lithium-ion battery, this lightweight tool is ideal for trimming lawns, hedges, small trees, shrubs, and branches. Its ergonomic design and quick-change blade system enhance ease of use and versatility for various gardening tasks.

Figure 1: WORKPRO 12V Cordless Grass Shear & Shrubbery Trimmer with accessories.

안전 정보

이 전동 공구와 함께 제공되는 모든 안전 경고, 지침, 그림 및 사양을 항상 읽고 이해하십시오. 아래 나열된 모든 지침을 따르지 않으면 감전, 화재 및/또는 심각한 부상이 발생할 수 있습니다.

• 개인 안전: Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear. Keep children and bystanders away while operating the tool.
• 블레이드 안전: Blades are extremely sharp. Handle with care. Disconnect the battery pack before changing blades, cleaning, or performing any maintenance. Never touch the blades while the tool is running.
• 배터리 안전: Use only the specified charger and battery pack. Do not expose the battery to water or extreme temperatures. Do not short-circuit the battery terminals.
• 작업 영역 안전: 작업 공간을 깨끗하고 밝게 유지하십시오. 가연성 액체, 가스 또는 먼지가 있는 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마십시오.
• 도구 취급: Ensure the safety lock and trigger are engaged correctly during operation. Avoid accidental starting. Do not force the tool; let the tool do the work at a reasonable pace.

구성 요소 이상view

Familiarize yourself with the main components of your WORKPRO 2-in-1 Trimmer:

Figure 2: Key components of the WORKPRO 2-in-1 Trimmer.

• 배터리 팩 분리 버튼: Used to detach the battery from the tool.
• Lock Off Button: A safety mechanism that prevents accidental starting.
• 배터리 용량 표시기: 배터리 잔량을 표시합니다.
• 블레이드 릴리스 버튼: Used to detach the cutting blades for changing.
• 온 / 오프 스위치: The main power trigger for operation.
• 환기 구멍: 과열을 방지하기 위해 적절한 공기 흐름을 보장합니다.
• 배터리 팩: The rechargeable 12V Lithium-Ion power source.
• 잔디 가위 블레이드: Shorter blade for trimming grass and light edging.
• 가지치기용 날: Longer blade for shaping hedges and shrubs.

설정

배터리 충전

The WORKPRO 12V Cordless Grass Shear & Shrubbery Trimmer comes with a 2.0Ah Lithium-Ion battery and a 1-hour fast charger. Ensure the battery is fully charged before first use and whenever the battery capacity indicator shows low charge.

1. 충전기를 표준 전원 콘센트에 연결하세요.
2. Insert the battery pack into the charger. The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged).
3. Allow approximately 1 hour for a full charge.
4. 충전이 완료되면 배터리를 충전기에서 분리하세요.

Figure 3: Battery charging with the 1-hour fast charger.

블레이드 설치 및 제거

The 2-in-1 design allows for quick and tool-free switching between the grass shear and hedge trimmer blades.

1. 칼날을 제거하려면: Ensure the battery is removed. Press the blade release button (refer to Figure 2) and slide the blade assembly away from the tool.
2. 칼날을 설치하려면: Ensure the battery is removed. Align the new blade assembly with the tool's slot, ensuring the gear mechanism is properly seated. Push the blade firmly into place until it clicks securely.

Figure 4: Steps for quick and safe blade change.

작동 지침

Before operating, ensure the battery is fully charged and the correct blade is securely installed.

도구 시작 및 중지

The tool features a top safety lock to prevent accidental startup. To operate:

1. Push the top safety lock button (refer to Figure 2).
2. While holding the safety lock, press the ON/OFF switch (trigger) to start the blades. You can release the safety lock after the machine starts, only pressing and holding the ON/OFF switch.
3. To stop the tool, release the ON/OFF switch.

Figure 5: Ergonomic safety lock and trigger operation.

잔디 가위 날을 사용하여

The grass shear blade (4.92" / 125mm max cutting width) is designed for precise trimming of lawn edges and small grass areas.

• Attach the grass shear blade as described in the "Blade Installation" section.
• Hold the tool firmly and guide the blade along the desired cutting line.
• Move the tool steadily to achieve an even cut.

Figure 6: Trimming grass with the grass shear blade.

Using the Hedge Trimmer Blade

The hedge trimmer blade (6.30" / 160mm max cutting length, 0.30" / 7.7mm max cutting thickness) is suitable for shaping hedges, shrubs, and trimming small branches.

• Attach the hedge trimmer blade as described in the "Blade Installation" section.
• Hold the tool with both hands if necessary for better control, especially for larger tasks.
• Guide the blade along the hedge or shrub, maintaining a consistent angle for an even finish.
• Avoid cutting branches thicker than the specified maximum cutting thickness.

Figure 7: Shaping shrubs with the hedge trimmer blade.

공식 제품 영상

유지

적절한 유지 관리는 공구의 수명 연장과 최적의 성능을 보장합니다.

• 블레이드 청소: After each use, clean both the grass shear and hedge trimmer blades. Remove any sap, debris, or grass clippings. Use a damp 필요한 경우 천과 중성 세제를 사용하십시오.
• 블레이드 윤활: To prevent rust and ensure smooth operation, apply a light coat of machine oil to the blades after cleaning, especially before storing for extended periods.
• 저장: Store the tool and blades in a dry condition. Keep the tool in a safe place, out of reach of children.
• 배터리 관리 : If the cordless grass trimmer is not used often, recharge the battery every 3-6 months to prolong its life.
• 일반 검사: Periodically check for loose screws, damaged parts, or excessive wear. Do not use the tool if any parts are damaged.

문제 해결

This section addresses common issues you might encounter with your WORKPRO trimmer.

명세서

보증 및 지원

WORKPRO stands behind the quality of its products. For warranty information, technical support, or replacement parts, please refer to the official WORKPRO website or contact their customer service directly. A detailed user guide in PDF format is also available for download from the product's Amazon page: WORKPRO User Guide (PDF).