Feit Electric TR2X2G2/6WY/WH

Feit Electric 2x2 LED Troffer Light Instruction Manual

모델: TR2X2G2/6WY/WH

소개

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Feit Electric 2x2 LED Troffer Light, Model TR2X2G2/6WY/WH. Please read all instructions carefully before beginning installation and retain this manual for future reference.

안전 정보

경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.

주의: d에 적합amp 위치. 물이 직접 닿는 곳에서는 사용하지 마세요.

  • 모든 전기 연결은 지역 규정 및 조례는 물론 국가 전기 규격(NEC)을 준수해야 합니다.
  • 전기 배선 연결 방법에 익숙하지 않다면 자격을 갖춘 전기 기술자에게 문의하십시오.
  • 제품을 임의로 개조하지 마십시오. 개조 시 보증이 무효화될 수 있으며 안전상의 위험이 발생할 수 있습니다.
  • This fixture is designed for 120-277V operation. Verify your supply voltag설치 전.

패키지 내용

설치하기 전에 모든 구성 요소가 있는지 확인하세요.

  • 1 x Feit Electric 2x2 LED Troffer Light (Model TR2X2G2/6WY/WH)
  • 사용 설명서
Feit Electric 2x2 LED Troffer Light, front view

이미지: 앞면 view of the Feit Electric 2x2 LED Troffer Light.

설정 및 설치

This LED troffer light is designed for lay-in installation in standard T-grid ceilings. It includes a hook mount for simplified wiring.

필요한 도구 (포함되지 않음):

  • 드라이버
  • 전선 스트리퍼
  • 펜치
  • 안전 안경

설치 단계:

  1. 전원 끄기: Before starting, ensure the power supply to the installation area is completely disconnected at the circuit breaker or fuse box.
  2. 천장 개구부 준비: Ensure the ceiling grid opening is a standard 2x2 foot size.
  3. 배선 연결:
    • Open the wiring compartment on the back of the fixture.
    • Connect the incoming AC power wires to the fixture's wires: Black to Black (Line), White to White (Neutral), and Green to Green (Ground).
    • If using 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the fixture to the corresponding wires from your 0-10V dimmer (dimmer not included). Ensure proper polarity.
    • 모든 연결부는 적절한 전선 커넥터를 사용하여 단단히 고정하십시오.
  4. 포지션 고정: Carefully place the LED troffer into the T-grid ceiling opening. The fixture is lightweight and designed for easy handling.
  5. Secure Fixture (Optional but Recommended): Use the integrated hook mounts to secure the fixture to the ceiling grid for added stability.
  6. 복원력 : 설치가 완료되고 모든 연결이 안전한 경우 회로 차단기에서 전원을 복구하세요.
Feit Electric 2x2 LED Troffer Light installed in a ceiling grid

이미지: 전ample of the Feit Electric 2x2 LED Troffer Light installed in a T-grid ceiling.

작동 지침

색온도 선택 (5CCT)

Your Feit Electric LED Troffer Light features selectable color temperatures, allowing you to choose from five options:

  • 소프트 화이트(3000K)
  • 뉴트럴 화이트(3500K)
  • 밝은 흰색(4000K)
  • 일광(5000K)
  • 데이라이트 디럭스(6500K)

You can select the desired color temperature in two ways:

  1. 설치 전: Locate the CCT selection switch on the side of the fixture. Slide the switch to your preferred color temperature setting.
  2. After Installation (Wall Switch Toggle): If the CCT selection switch is set to 'SWITCH' mode, you can cycle through the color temperatures by quickly toggling your standard wall switch OFF and ON. The fixture will remember the last selected setting after a few seconds.
Feit Electric 2x2 LED Troffer Light with 5CCT selection options

Image: Diagram illustrating the 5CCT selection options and methods.

0-10V 디밍

This fixture is equipped for 0-10V dimming. It is 호환되지 않음 with standard residential dimmers. To utilize the dimming function, connect the purple (DIM+) and gray (DIM-) wires to a compatible 0-10V dimmer (sold separately). This allows for smooth dimming from 10% to 100% light output.

유지

The Feit Electric 2x2 LED Troffer Light is designed for long-lasting, maintenance-free operation. No user-serviceable parts are inside.

  • 청소: 조명기구를 청소하려면 전원이 꺼져 있는지 확인하십시오. 부드럽고 마른 천이나 약간 젖은 천을 사용하십시오.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the finish or optical components.
  • Lamp 대사: The LEDs are integrated and not replaceable. The fixture has a rated life of 50,000 hours.

문제 해결

If you experience issues with your LED Troffer Light, refer to the following common solutions:

문제가능한 원인해결책
조명이 켜지지 않습니다.전원 공급이 없습니다.
배선 연결이 느슨합니다.
결함이 있는 고정물.
회로 차단기/퓨즈를 확인하십시오.
모든 전선 연결이 안전한지 확인하세요(먼저 전원이 꺼져 있는지 확인하세요).
문제가 지속되면 고객 지원팀에 문의하세요.
빛이 깜박입니다.호환되지 않는 조광기입니다.
느슨한 배선.
권tag전자 변동.
Ensure a 0-10V dimmer is used for dimming.
배선 연결을 확인하세요.
전기 기술자에게 문의하여 전원 공급 상태를 점검하십시오.
색온도가 올바르지 않습니다.CCT 스위치가 잘못 설정되었습니다.Adjust the CCT switch on the fixture or toggle the wall switch if in 'SWITCH' mode.

명세서

Detailed specifications for the Feit Electric 2x2 LED Troffer Light:

Feit Electric 2x2 LED Troffer Light dimensions and key specifications

Image: Visual representation of the fixture's dimensions and key specifications.

사양
모델 번호TR2X2G2/6WY/WH
치수(길이 x 너비 x 높이)23.8인치 길이 x 23.8인치 너비 x 1.7인치 높이
왓tage40 와트
명도4000루멘
능률와트당 100루멘
색온도(CCT)3000K, 3500K, 4000K, 5000K, 6500K 선택 가능
권tage120-277 볼트
디밍0-10V Dimmable (dimmer not included)
정격 수명50,000시간
재료알루미늄, 아크릴
마치다하얀색
설치 유형Lay-in
실내/실외 사용실내(Damp 위치 평가)
품목 무게4.7 파운드

보증

이 Feit Electric 제품은 보증 대상입니다. 5년 한정 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty service, please contact Feit Electric customer support.

고객 지원

For technical assistance, troubleshooting, or warranty inquiries, please contact Feit Electric customer support:

  • Web대지: www.feit.com
  • 핸드폰: Refer to the Feit Electric web현재 연락처 정보는 사이트에서 확인하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.