ADDIESDIVE MY-H3-2 Automatic Diver Watch User Manual

소개

Thank you for choosing the ADDIESDIVE MY-H3-2 Automatic Diver Watch. This timepiece is engineered for reliability and performance, featuring a robust stainless steel construction, a precise Japanese NH35A mechanical movement, and significant water resistance. This manual provides essential information for the proper setup, operation, and maintenance of your watch to ensure its longevity and accurate function.

이미지: 앞면 view of the ADDIESDIVE MY-H3-2 Automatic Diver Watch, showcasing its dial and bezel.

안전 정보

• 시계를 극한 온도나 급격한 온도 변화에 노출시키지 마십시오.
• Do not operate the crown or pushers underwater unless specifically designed for such use and the crown is fully screwed down.
• 시계는 강한 자기장으로부터 멀리 두십시오. 강한 자기장은 기계식 무브먼트의 정확도에 영향을 미칠 수 있습니다.
• Ensure the crown is always fully pushed in or screwed down to maintain water resistance.

제품 특징

• 움직임: Japanese NH35A Automatic Mechanical Movement.
• 케이스 및 브레이슬릿: Premium 316L Stainless Steel, highly anti-corrosion.
• 방수 기능: 200M/300M (20-30 Bar), suitable for professional diving.
• 베젤: 120-click Unidirectional Rotating Ceramic Bezel.
• 발광: C3 luminous hands and indices, BGW9 luminescent ceramic bezel for visibility in low light.
• 결정: Sapphire glass for scratch resistance.
• 걸쇠: Double Locking Foldover Clasp for secure wear.

이미지: 클로즈업 view of the watch crystal, highlighting its sapphire material and clarity.

설치 및 초기 작동

1. Winding the Automatic Movement

Your ADDIESDIVE MY-H3-2 watch is powered by an automatic mechanical movement (NH35A) that winds itself with the motion of your wrist. If the watch has stopped or its power reserve is low, it can be manually wound:

1. Unscrew the crown counter-clockwise until it pops out to position 0 (winding position).
2. 크라운을 시계 방향으로 약 20~30회 돌리세요. 이렇게 하면 시계를 시동하는 데 필요한 충분한 파워 리저브가 확보됩니다.
3. Once the watch starts running, push the crown back in and screw it down clockwise to ensure water resistance.

Wearing the watch for at least 8 hours a day will keep it sufficiently wound.

2. 시간 및 날짜 설정

1. 크라운을 풀다 counter-clockwise until it pops out.
2. 크라운을 2번 위치로 당겨 빼내세요 (first click) for date adjustment. Turn the crown to set the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. 크라운을 3번 위치로 당겨 빼내세요 (second click) for time adjustment. The second hand will stop (hacking feature). Turn the crown to set the hour and minute hands. To ensure accurate time, set the minute hand a few minutes ahead and then turn it back to the correct time.
4. Once time and date are set, push the crown back in to position 0 and screw it down clockwise firmly to maintain water resistance.

3. 팔찌 조정

The stainless steel bracelet features a double locking foldover clasp with micro-adjustment holes. To adjust the length:

• Use a small tool to depress the spring bar in the clasp's micro-adjustment holes to shift the clasp position.
• For more significant adjustments, links can be removed or added by a qualified watchmaker.

영상: View of the watch's case back and the open double locking foldover clasp, showing the bracelet mechanism.

시계 작동

단방향 회전 베젤

The 120-click unidirectional rotating bezel is a key feature for divers. It allows you to measure elapsed time underwater or for other timing purposes.

1. Rotate the bezel counter-clockwise to align the zero marker with the minute hand.
2. The minute hand will then indicate the elapsed time on the bezel.
3. The unidirectional design prevents accidental clockwise rotation, which could falsely indicate less elapsed time.

이미지: 측면 view of the ADDIESDIVE MY-H3-2 watch resting on a rock, highlighting the rotating bezel and crown.

발광

The watch features C3 luminous material on the hands and indices, and BGW9 luminescent material on the ceramic bezel. These materials absorb light and glow in low-light conditions, ensuring readability underwater or in darkness.

Image: The ADDIESDIVE MY-H3-2 watch in darkness, showcasing the bright green luminescence of its hands, indices, and bezel markers.

유지

청소

• 시계에 묻은 먼지와 지문을 제거하려면 부드럽고 마른 천으로 정기적으로 닦아주세요.
• After exposure to saltwater, rinse the watch thoroughly with fresh water and dry it completely with a soft cloth. Ensure the crown is fully screwed down before rinsing.
• Avoid using chemical cleaners or abrasive materials, as these can damage the watch's finish.

방수 관리

The MY-H3-2 is water resistant up to 200M/300M. To maintain this rating:

• 물과 접촉하기 전에 항상 크라운이 완전히 조여졌는지 확인하십시오.
• 시계가 젖었거나 물에 잠겨 있을 때는 크라운이나 푸셔를 작동하지 마세요.
• Have the water resistance seals checked periodically (e.g., every 2-3 years) by a professional watchmaker, especially if the watch is frequently used for diving.

Image: The ADDIESDIVE MY-H3-2 watch partially submerged in water, demonstrating its water resistance.

저장

When not wearing the watch, store it in a cool, dry place away from direct sunlight and strong magnetic fields. If storing for an extended period, ensure it is fully wound or consider a watch winder to keep the movement running.

문제 해결

• 시계가 작동하지 않음: Ensure the watch is sufficiently wound. Manually wind the crown 20-30 times. If it still does not start, the power reserve may be completely depleted, or there might be an internal issue requiring professional inspection.
• 시간 부정확성: Mechanical watches can have slight variations in accuracy. If the deviation is significant (e.g., more than +/- 30 seconds per day), it may require regulation by a watchmaker. Exposure to strong magnetic fields can also affect accuracy; demagnetization may be necessary.
• 날짜는 변경되지 않습니다. Check if the date is being set during the "danger zone" (9 PM - 3 AM). If so, adjust the time outside this period and then set the date. If the issue persists, seek professional assistance.
• 결정 아래의 응축 현상: This indicates a breach in water resistance. Immediately take the watch to a professional watchmaker for inspection and repair to prevent further damage to the movement.

명세서

Image: Diagram illustrating the dimensions (diameter, thickness, lug width, total length) and weight of the ADDIESDIVE MY-H3-2 watch.

보증 및 지원

ADDIESDIVE watches are manufactured to high standards. For any issues or warranty claims, please refer to your purchase documentation or contact ADDIESDIVE customer support through the retailer where the watch was purchased. Keep your proof of purchase for warranty validation.

For further assistance or inquiries, please visit the official ADDIESDIVE store or contact their customer service department.

Image: The official ADDIESDIVE brand logo.