WORKPRO 3.6V 무선 핫 글루건 사용 설명서

1. 서론

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and retain it for future reference.

This cordless hot glue gun is designed for various crafting and DIY projects, offering fast heating, energy efficiency, and portability. It is suitable for use with materials such as plastics, wood, paper products, textiles, and shells.

2. 제품 오버view

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun.

그림 2.1: Labeled components of the WORKPRO Cordless Hot Glue Gun, including Nozzle, ON/OFF Switch, Glue Stick insertion point, LED Indicator, Trigger Lever, Type-C Cable, Retractable Stand-up Base, and Type-C Charging Port.

• 대통 주둥이: 녹인 접착제를 분사합니다.
• 온 / 오프 스위치: 장치의 전원을 켜거나 끕니다.
• Glue Stick Insertion Point: Where glue sticks are loaded.
• LED 표시등: Displays heating status and battery charge level.
• 트리거 레버: 접착제 분사 기능을 활성화합니다.
• C형 케이블: 내부 배터리를 충전합니다.
• 접이식 스탠드형 받침대: Provides stability when the glue gun is not in use.
• Type-C 충전 포트: Connects the charging cable.

3. 포함 사항

The WORKPRO 3.6V Cordless Hot Glue Gun kit typically includes the following items:

• WORKPRO 3.6V Cordless Hot Glue Gun (Model: W125235)
• 20 Pcs Mini Glue Sticks (0.27" Dia)
• Type-C 충전 케이블
• 내장형 리튬 이온 배터리(2500mAh)

그림 3.1: The WORKPRO Cordless Hot Glue Gun and included glue sticks.

4. 안전 정보

경고: 모든 안전 경고 및 지침을 읽으십시오. 경고 및 지침을 따르지 않으면 감전, 화재 및/또는 심각한 부상이 발생할 수 있습니다.

• 접착총을 작동할 때는 항상 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
• The nozzle and melted glue become very hot. Avoid direct contact with skin to prevent burns.
• Do not touch the nozzle or melted glue immediately after use. Allow the tool to cool completely.
• 작업 공간의 환기가 잘 되도록 하세요.
• Do not leave the hot glue gun unattended while it is on or heating.
• 어린이의 손이 닿지 않는 곳에 보관. 이것은 장난감이 아닙니다.
• Use only glue sticks of the specified diameter (0.27" / 7mm).
• Do not pull out the melting glue stick from the glue gun after work is finished. Keep it inside for next use.
• The glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.
• 접착총을 물이나 다른 액체에 담그지 마십시오.
• d에서 글루건을 사용하지 마십시오amp 또는 습한 환경.
• Only use the provided Type-C charging cable or a compatible 5V 1A input charger.

5. 설정

5.1 Charging the Glue Gun

Before first use, fully charge the glue gun. The 2500mAh lithium battery provides long-lasting power.

1. Connect the provided Type-C charging cable to the Type-C Charging Port on the glue gun.
2. Connect the other end of the cable to a 5V 1A power source, such as a power bank, computer USB socket, or car USB socket.
3. The LED Indicator will show the charging status. A red light indicates charging, and a green light indicates a full charge.

그림 5.1: Charging the glue gun via a Type-C cable. The LED indicator shows charging status.

5.2 Inserting a Glue Stick

Ensure the glue gun is off before inserting a new glue stick.

1. Insert a 0.27" (7mm) diameter mini glue stick into the Glue Stick Insertion Point at the rear of the gun.
2. Push the glue stick in until it stops. Do not force it.

그림 5.2: Step 1 of operation: Inserting a glue stick.

6. 사용 설명서

6.1 전원 켜기 및 가열

1. Press and hold the ON/OFF Switch for 3 seconds to turn on the glue gun. The LED Indicator will light up red, indicating it is heating.
2. Allow approximately 90 seconds for the glue gun to preheat. The LED Indicator will change from red to green when it is ready for use.

그림 6.1: The glue gun heating process, showing the red LED indicator and the 90-second heating time.

그림 6.2: Visual guide for operating the glue gun, from inserting the stick to pulling the trigger.

6.2 접착제 바르기

Once the LED Indicator is green, the glue gun is ready to dispense glue.

1. Position the nozzle close to the surface where glue is needed.
2. Gently pull the Trigger Lever to dispense melted glue. The glue gun has a fast glue output of 0.14 oz/min.
3. 접착제 흐름을 멈추려면 방아쇠를 놓으세요.
4. The less-drip nozzle design helps reduce glue spillage.

그림 6.3: Comparison showing the superior glue output and clarity of the WORKPRO glue gun.

6.3 Automatic Safety Power-Off

For safety and energy saving, the glue gun will automatically power off if not used for 8 minutes. To resume operation, simply press the ON/OFF switch again.

7. 유지관리

• 청소: Ensure the glue gun is completely cool before cleaning. Use a dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
• 저장: Store the glue gun in a cool, dry place, away from direct sunlight and moisture. Ensure it is fully charged before long-term storage.
• Glue Sticks: Do not remove a partially used glue stick from the gun. Leave it in for the next use to prevent damage to the feeding mechanism.

8. 문제 해결

9. 사양

• 모델: W125235
• 권tage: 3.6 볼트
• 왓tage: 9 와트
• 배터리: 2500mAh 리튬 이온(포함)
• 충전 입력: 5V 1A (C형)
• 예열 시간 : 약 90초
• 접착제 출력: ≥0.14 oz/min
• 호환 접착제 스틱 직경: 0.27인치(7mm)
• 자동 차단 : 8분 동안 활동 없음
• 품목 무게: 1.1파운드
• 치수: 8.11 x 7.52 x 2.13인치(패키지 크기)
• 호환 가능한 재료: Wood, Ceramic, Metal, Stone, Plastics, Paper products, Textiles, Shells
• 한국어: 820909689782

그림 9.1: Key dimensions of the WORKPRO Cordless Hot Glue Gun.

10. 공식 제품 영상

현재 판매자가 제작한 공식 제품 영상은 제공되지 않습니다.

11. 보증 및 지원

For warranty information or technical support, please contact WORKPRO customer service. Refer to the product packaging or the official WORKPRO web연락처 정보 사이트.

Web대지: www.workprotools.com