Blackmagic Design DeckLink IP/SDI HD Instruction Manual

1. 서론

This manual provides essential information for the installation, operation, and maintenance of your Blackmagic Design DeckLink IP/SDI HD capture and playback card. Please read these instructions carefully before using the device to ensure proper functionality and to prevent damage.

2. 제품 오버view

The Blackmagic Design DeckLink IP/SDI HD is a high-performance capture and playback solution designed for professional video workflows. It features dual channels for 2110 IP connectivity via RJ45 Ethernet, alongside two configurable 3G-SDI connections and a reference output. This card supports high-quality video formats including Apple ProRes, DNxHD, and 10-bit uncompressed video, with support for 525i, 625i, 720p, 1080i, and 1080p video standards up to 1080p60.

Figure 1: Blackmagic Design DeckLink IP/SDI HD card. This image shows the capture card with its various input/output ports, including SDI and Ethernet connections.

3. 설정

3.1. 하드웨어 설치

1. 전원 끄기 : Ensure your computer is completely powered off and disconnected from the main power supply.
2. 열린 사건: Open your computer case to access the PCIe slots.
3. 카드 삽입: Carefully insert the DeckLink IP/SDI HD card into an available PCIe slot. Ensure it is seated firmly.
4. 보안 카드: 컴퓨터 케이스에 포함된 고정 나사 또는 클립을 사용하여 카드를 고정하십시오.
5. 사건 종결: Close your computer case and reconnect the power supply.

3.2. 소프트웨어 설치

After hardware installation, you must install the Blackmagic Design Desktop Video software. This software includes drivers and utilities necessary for the DeckLink card to function.

• 다운로드: Visit the official Blackmagic Design support web사이트 (www.blackmagicdesign.com/support/) and download the latest Desktop Video software for your operating system (Windows, macOS, or Linux).
• 설치하다: Run the installer and follow the on-screen prompts. You may be required to restart your computer after installation.
• 구성: Use the Blackmagic Desktop Video Setup utility to configure your card's settings, including video formats and audio routing.

3.3. 장치 연결

Connect your video sources and destinations to the DeckLink IP/SDI HD card using appropriate cables.

• 3G-SDI: Connect SDI devices to the two configurable 3G-SDI ports. These ports can be set for input or output via the Desktop Video Setup utility.
• 2110 IP: Connect to your 2110 IP network via the RJ45 Ethernet ports. Ensure your network infrastructure is configured for ST 2110.
• 참조: Connect a video reference signal (e.g., black burst or tri-sync) to the reference input for synchronization with other studio equipment.

4. 사용 설명서

The DeckLink IP/SDI HD operates in conjunction with professional video software applications. The Desktop Video software provides the necessary drivers and a control panel for basic settings.

4.1. 비디오 캡처

1. 입력 선택: In your video software (e.g., DaVinci Resolve, Adobe Premiere Pro), select the DeckLink IP/SDI HD as your video input device.
2. 설정 구성: Match the video format, resolution, and frame rate in your software to the incoming signal and the settings configured in the Desktop Video Setup utility.
3. Start Capture: Initiate capture within your chosen video application.

4.2. 비디오 재생

1. 출력 방식을 선택하세요: In your video software, select the DeckLink IP/SDI HD as your video output device.
2. 설정 구성: Ensure the output format, resolution, and frame rate in your software match the capabilities of your monitoring device and the settings in Desktop Video Setup.
3. 재생 시작: Begin playback from your video application.

4.3. Supported Video Standards

The DeckLink IP/SDI HD supports a range of video standards:

• 525i(NTSC)
• 625i(PAL)
• 720p (up to 720p60)
• 1080i (up to 1080i60)
• 1080p (up to 1080p60)

It also supports popular video formats such as Apple ProRes, DNxHD, and 10-bit uncompressed video.

5. 유지관리

The DeckLink IP/SDI HD card requires minimal maintenance. Keep the computer environment clean and dust-free to ensure optimal performance and longevity of the card.

• 청소: Periodically clean the interior of your computer case to prevent dust buildup on the card's components. Use compressed air for this purpose.
• 소프트웨어 업데이트: Regularly check the Blackmagic Design support website for updated Desktop Video software. Keeping your drivers current ensures compatibility and access to the latest features and bug fixes.

6. 문제 해결

If you encounter issues with your DeckLink IP/SDI HD, consider the following troubleshooting steps:

• 비디오 입력/출력 없음:
  • 모든 케이블이 단단히 연결되어 있는지 확인하십시오.
  • Check that the correct input/output is selected in your video software and the Desktop Video Setup utility.
  • Ensure the video format and frame rate settings match between your source/destination and the DeckLink card.
  • 소스 장치가 신호를 출력하는지 확인하세요.
• 소프트웨어가 카드를 인식하지 못합니다:
  • Ensure the Desktop Video software is installed correctly and is the latest version.
  • 컴퓨터를 다시 시작하세요.
  • Check Device Manager (Windows) or System Information (macOS) to see if the card is recognized by the operating system.
  • Re-seat the card in its PCIe slot.
• IP Connectivity Issues:
  • Verify network cable connections.
  • Ensure your network is properly configured for ST 2110.
  • Check IP settings in the Desktop Video Setup utility.

For further assistance, refer to the Blackmagic Design support web해당 웹사이트를 방문하거나 기술 지원팀에 문의하십시오.

7. 사양

8. 보증 및 지원

For detailed warranty information, please refer to the documentation included with your product or visit the official Blackmagic Design website. Blackmagic Design provides comprehensive technical support and resources.

• 공식 지원 Web대지: www.blackmagicdesign.com/support/
• 제품 등록 : Register your product on the Blackmagic Design web업데이트와 지원을 받을 수 있는 사이트입니다.