Aigo AC SE 240 Rainbow 240mm Water Cooler Instruction Manual

1. 제품 오버view

The Aigo AC SE 240 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient thermal management for your computer's processor. Featuring a 240mm radiator and two fans with Rainbow lighting, it offers effective cooling performance for a wide range of Intel and AMD sockets.

This manual provides essential information for the proper installation, operation, and maintenance of your Aigo AC SE 240 Water Cooler.

2. 패키지 내용

Please verify that all components listed below are present in your package before proceeding with the installation.

영상: All components included with the Aigo AC SE 240 Water Cooler, laid out on a white background. This includes the radiator with two fans, the CPU block/pump, tubing, various mounting brackets for Intel and AMD sockets, screws, thermal paste, and a fan/RGB controller.

• 240mm Radiator with integrated pump/CPU block and tubing
• Two 120mm Fans (Rainbow lighting)
• Intel Mounting Bracket Kit (LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X)
• AMD Mounting Bracket Kit (FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4)
• 인텔 소켓용 백플레이트
• 장착 나사 및 스탠드오프
• 열전도 페이스트
• Fan/RGB Controller (if applicable, inferred from image)
• 사용 설명서 (본 문서)

3. 설치 가이드

This section provides general steps for installing the Aigo AC SE 240 Water Cooler. Refer to your motherboard and PC case manuals for specific instructions regarding component placement and cable management.

3.1 Prepare the CPU and Motherboard

1. 시스템의 전원이 꺼져 있고 전원에서 분리되어 있는지 확인하십시오.
2. 기존 CPU 쿨러를 제거하십시오. CPU 표면을 이소프로필 알코올로 깨끗이 닦아 기존 써멀 페이스트를 제거하십시오.
3. Identify the correct mounting bracket for your CPU socket (Intel or AMD).

3.2 라디에이터 및 팬 설치

영상: The Aigo AC SE 240 Water Cooler showing the 240mm radiator with two fans attached, displaying their rainbow LED lighting. The pump/CPU block is connected via two braided tubes.

1. Attach the two 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is correct for your case (typically intake or exhaust).
2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or rear). Use the appropriate screws to secure it.

3.3 Install the CPU Block/Pump

1. Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
2. Attach the correct mounting standoffs and brackets to your motherboard around the CPU socket. For Intel sockets, you may need to install the backplate first.
3. Carefully place the CPU block/pump onto the CPU, aligning the mounting holes.
4. Secure the CPU block/pump with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

3.4 케이블 연결

1. Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. If neither is available, use a SYS_FAN header.
2. Connect the fan power cables to the CPU_FAN and/or SYS_FAN headers on your motherboard, or to the included fan/RGB controller.
3. Connect the RGB cables from the fans and pump to the included RGB controller, and then connect the controller to an available RGB header on your motherboard (if applicable) or a SATA power connector.
4. Organize cables for optimal airflow and aesthetics.

4. 사용 설명서

Once installed, the Aigo AC SE 240 Water Cooler operates automatically. The pump and fans will adjust their speeds based on CPU temperature, as controlled by your motherboard's BIOS/UEFI settings or dedicated software.

• BIOS/UEFI 설정: Access your motherboard's BIOS/UEFI to configure fan curves and pump speed settings. It is recommended to set the pump to run at 100% speed for optimal cooling performance and to prevent air bubbles from settling.
• 소프트웨어 제어: If your motherboard supports it, you may use manufacturer-provided software to fine-tune fan speeds, monitor temperatures, and customize RGB lighting effects.
• 초기 시작: During the first few minutes of operation, you might hear gurgling sounds as air bubbles are purged from the loop. This is normal and should subside.

영상: 하향식 view of the Aigo AC SE 240 Water Cooler, highlighting the CPU block with its illuminated Aigo logo and the two rainbow-lit fans on the radiator.

5. 유지관리

정기적인 유지보수는 정수기의 최적 성능과 수명 연장을 보장합니다.

• 먼지 청소: 주기적으로 압축 공기나 부드러운 브러시를 사용하여 라디에이터 핀과 팬 블레이드의 먼지를 청소하십시오. 과도한 먼지는 공기 흐름을 방해하고 냉각 효율을 떨어뜨릴 수 있습니다.
• 튜빙 검사: Visually inspect the tubing and connections for any signs of leaks, kinks, or damage. Address any issues immediately.
• 펌프 소음: If the pump starts making unusual noises, it may indicate air trapped in the loop or a failing pump. Ensure the pump is running at full speed and try gently tilting your PC case to help dislodge air bubbles.

6. 문제 해결

This section addresses common issues you might encounter with your Aigo AC SE 240 Water Cooler.

7. 사양

Detailed technical specifications for the Aigo AC SE 240 Water Cooler.

• 모델: ACSE240-BK
• Intel Socket Compatibility: LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X
• AMD Socket Compatibility: FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4
• 튜브 길이 : 395mm (XNUMXmm)
• 펌프 속도 : 3200±10%RPM
• 펌프 볼륨tage: 12V
• 라디에이터 치수: 274 x 120 x 27mm
• 팬 크기: 120 x 120 x 25mm
• 팬 속도: 800 ~ 1800RPM
• 공기 흐름: 64.05 퀴놀론
• 소음 수준: 30dBA ± 10%
• 열 전력 소비량: 210와트
• 냉각 방식: 액체(물)
• 호환 장치: 데스크탑

8. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the official Aigo web사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

Official Aigo Web대지: www.aigocooler.com (참고: 이것은 플레이스홀더입니다. URL. Please verify the actual official website for Aigo products.)