FABATO 41.7'' Lift Top Coffee Table with 2 Storage Drawers, Espresso

1. 서론

This manual provides detailed instructions for the assembly, operation, and maintenance of your FABATO 41.7'' Lift Top Coffee Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The FABATO Lift Top Coffee Table features a versatile design with a lifting tabletop mechanism, two storage drawers, and a hidden compartment. It is constructed from EPA standard particleboard with solid wooden legs, designed for stability and durability.

2. 안전 정보

경고: 이 안전 지침을 따르지 않으면 부상이나 제품 손상이 발생할 수 있습니다.

• Always follow the assembly instructions carefully. Ensure the table is assembled correctly and securely to prevent tipping or collapse.
• Do not exceed the weight limit of the table to maintain stability.
• 조립 중에는 어린이의 손이 닿지 않는 곳에 작은 부품과 포장재를 보관하여 질식 위험을 방지하세요.
• Exercise caution with the sharp corners of the table, especially in high-traffic areas or around small children. Consider adding corner protectors if necessary.
• Do not sit or stand on the table, especially when the top is in the raised position.

3. 패키지 내용

조립하기 전에 아래 나열된 모든 구성품이 포함되어 있고 손상되지 않았는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.

• 테이블탑 (1)
• 측면 패널(2)
• 하단 선반 (1)
• 서랍 패널 (서랍 2개용)
• Wooden Legs (4)
• Lift Mechanism Hardware (Gas Struts, Hinges)
• Drawer Slides (for 2 drawers)
• 서랍 손잡이 (2)
• 조립 하드웨어(나사, 다웰, 캠 잠금 장치 등)
• 설치 도구 (육각 렌치/드라이버)
• 조립 가이드
• Silencer Pads (for lift top)

4. 설치 및 조립 지침

Assembly is required for this coffee table. It is recommended that two people assemble the table for easier and faster completion. A screwdriver is recommended in addition to the included installation tool.

1. 지역 준비: Clear a spacious, clean, and soft surface (e.g., a rug or the packaging styrofoam) to prevent scratching the furniture during assembly.
2. 부품 식별: Lay out all components and hardware. Compare them with the parts list in the included assembly guide to ensure everything is present.
3. 베이스 프레임 조립: Attach the wooden legs to the side panels and bottom shelf using the provided hardware. Ensure all connections are secure.
4. 서랍 슬라이드 설치: Secure the drawer slides to the designated areas on the table frame and the drawer panels according to the assembly guide. Ensure they are aligned correctly for smooth operation.
5. 서랍 조립: Construct the two storage drawers using the drawer panels and hardware. Attach the drawer handles.
6. 리프트 메커니즘 설치: Carefully attach the heavy-duty gas struts and hinges to the table frame and the underside of the tabletop. Follow the specific diagrams in the assembly guide for correct orientation and secure fastening.
7. 테이블탑 부착: Connect the tabletop to the lift mechanism. Ensure the mechanism operates smoothly and the tabletop is securely attached.
8. 서랍 삽입: 조립된 서랍을 각각의 칸에 밀어 넣으세요.
9. Apply Silencer Pads: Attach the silencer pads to the underside of the lift top where it meets the table frame to prevent noise when closing.
10. 최종 확인: Verify all screws and connections are tightened. Test the lift-top mechanism and drawers for smooth operation.

5. 사용 설명서

5.1 Lift Top Mechanism

The tabletop is designed to lift and lower smoothly, providing an elevated surface for dining, working, or other activities.

1. 들어올리려면: Gently pull the front edge of the tabletop upwards. The gas struts will assist in lifting the top to its extended position.
2. 낮추려면: Apply gentle downward pressure to the tabletop. The gas struts will allow it to lower silently and smoothly back into the closed position. Ensure both sides click into place.

The space beneath the lift top provides a large hidden compartment for storing items such as blankets, books, or snacks, keeping them dust-free and out of sight.

5.2개의 보관 서랍

The two bottom drawers provide additional storage for smaller items.

1. 열려면: Pull the drawer handle outwards.
2. 닫기: Push the drawer inwards until it is fully seated in the compartment.

The open shelf below the hidden compartment offers easy access storage for frequently used items or decorative pieces.

6. 유지관리

적절한 관리를 통해 커피 테이블의 수명과 외관을 보장할 수 있습니다.

• 청소: 표면을 광고로 닦으세요amp cloth for general cleaning. For a thorough clean, follow with a dry cloth to remove any moisture. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• 유출: 얼룩이 지거나 가공된 목재가 손상되는 것을 방지하기 위해 흘린 액체는 즉시 닦아내세요.
• 하드웨어: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
• 과도한 체중을 피하세요: Do not place excessively heavy items on the tabletop or inside the compartments to prevent structural strain.
• 햇빛 노출: 표면의 변색이나 탈색을 방지하기 위해 장시간 직사광선에 노출시키지 마십시오.

7. 문제 해결

커피 테이블에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

8. 사양

9. 보증 및 지원

For warranty information or customer support regarding your FABATO Lift Top Coffee Table, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly. Ensure you have your model number (JSCT001BR) and proof of purchase available when contacting support.