WORKPRO 20V 무선 미니 원형톱 사용 설명서

1. 서론

Thank you for choosing the WORKPRO 20V Cordless Mini Circular Saw. This manual provides essential information for safe and efficient operation, maintenance, and troubleshooting of your new tool.

포함 사항:

• 1 × 20V cordless mini circular saw
• 1 × 4.0Ah battery pack
• 1 × fast charger
• 1 × 24T alloy blade (designed for wood)
• 1 × 60T blade (designed for wood and plastic)
• 1 × diamond blade (designed for tiles)
• 1 × hex key
• 1 × parallel guide
• 1 × dust extraction tube
• 1 × 보관 가방
• 1 × user instruction

Image: WORKPRO 20V Cordless Mini Circular Saw with its battery, charger, three blades, and carrying bag.

2. 일반 안전 지침

Always adhere to these safety precautions to prevent injury and ensure proper tool function:

• 안전 안경, 청력 보호 장비, 장갑 등 적절한 개인 보호 장비(PPE)를 항상 착용하세요.
• 공작물이 단단히 고정되었는지 확인하십시오.amped or otherwise stabilized before cutting.
• Keep hands clear of the cutting area and rotating blade at all times.
• Disconnect the battery pack before making any adjustments, changing blades, or performing maintenance.
• Use the correct blade type for the specific material being cut.
• Keep the work area clean, clear of clutter, and well-lit.
• Avoid accidental starting; ensure the safety lock-off switch is engaged when not in use and before connecting/disconnecting the battery.

3. 제품 구성품

Familiarize yourself with the parts of your WORKPRO Mini Circular Saw:

Image: Detailed diagram showing the various components of the circular saw, including the safety lock-off switch, laser, ON/OFF switch, base plate, blade guard, and adjustment knobs.

• Safety Lock-off Switch: 우발적인 시동을 방지합니다.
• 원자 램프: Provides a guide line for precise cuts.
• 온 / 오프 스위치: 톱을 작동/정지합니다.
• 베이스 플레이트: 작업물 위에 톱을 지지합니다.
• Saw Blade Retractable Safety Guard: Covers the blade when not cutting.
• Cutting Angle Scale: Indicates the current bevel angle.
• 먼지 제거 포트: Connects to the dust extraction tube.
• Cutting Depth Scale: Shows the current cutting depth.
• 스핀들 잠금 버튼: Locks the blade for easy replacement.
• Depth Locking Knob: Secures the cutting depth adjustment.
• Angle Locking Knob: Secures the cutting angle adjustment.
• 4.0Ah Battery Pack: 무선 전원을 제공합니다.

4. 설정

4.1 배터리 충전 및 설치

Before first use, fully charge the 4.0Ah battery pack.

• Insert the 4.0Ah battery pack into the fast charger. The indicator light on the charger will show the charging status. A full charge takes approximately 2 hours.
• Once charged, align the battery pack with the base of the saw handle and slide it in until it clicks securely into place.

Image: Close-up of the WORKPRO 20V 4.0Ah Li-ion battery pack, highlighting its capacity and quick release mechanism.

4.2 블레이드 설치

날을 교체하기 전에 반드시 배터리를 제거하십시오.

• Press the spindle lock button to hold the blade in place.
• 제공된 육각 렌치를 사용하여 날 고정 나사를 풀어주세요.
• Carefully remove the old blade (if any) and install the new blade, ensuring the teeth are oriented correctly for cutting.
• Tighten the retaining screw firmly.

Video: Demonstration of how to replace the saw blade, showing the use of the spindle lock button and hex key.

4.3 Dust Extraction Tube and Parallel Guide

• Dust Extraction Tube: Attach the dust extraction tube to the dust extraction port on the saw. For optimal dust collection, connect the tube to a vacuum cleaner using a suitable adapter.
• 병렬 가이드: Insert the parallel guide into the designated slot on the base plate. Adjust to the desired cutting width and secure with the locking bolt for precise straight cuts.

5. 사용 설명서

5.1 전원 켜기/끄기

To start the saw, press the safety lock-off switch, then squeeze the ON/OFF trigger. Release the trigger to stop the saw.

5.2 절삭 깊이 및 각도 조정

• 절단 깊이 : Loosen the depth locking knob. Adjust the base plate to achieve the desired cutting depth (maximum 1-11/16" at 90°). Tighten the depth locking knob securely.
• Cutting Angle (Bevel): Loosen the angle locking knob. Tilt the base plate to the desired cutting angle (0° to 45°). Tighten the angle locking knob securely.

Image: Visual guide demonstrating how to adjust the cutting depth and bevel angle on the circular saw.

5.3 Using the Laser Guide for Precision

Activate the laser guide by pressing the switch on the laser module. Align the laser line with your cutting mark for precise straight cuts.

Image: The circular saw in action, with the laser guide projecting a red line onto the workpiece for accurate cutting.

5.4 Dust Extraction During Operation

The included dust extraction tube helps maintain a clean work environment by directing sawdust away from the cutting line.

Image: The circular saw being used with the dust extraction tube attached, showing sawdust being collected.

5.5 다양한 재료 절단

This saw is designed for sawing a variety of materials including wood, tile, plastics, PVC, and soft metals. Always ensure you are using the correct blade for the material.

• Wood/Plastic: Use the 24T alloy blade or the 60T blade.
• 타일 ​​: Use the diamond blade.
• 연질 금속: The saw is capable of cutting soft metals. Use the appropriate blade for the specific soft metal.

Image: Four panels showing the circular saw cutting different materials: wood, PVC pipe, ceramic tile, and a cement block.

6. 유지관리

정기적인 유지보수는 톱의 수명과 최적의 성능을 보장합니다.

• 청소: Regularly clean the saw, especially the blade area and dust extraction port, to prevent buildup and ensure smooth operation. Use a dry cloth or soft brush. Do not use solvents or harsh chemicals.
• 블레이드 관리: Inspect blades for sharpness and damage before each use. Replace dull or damaged blades immediately to ensure safe and efficient cutting.
• 배터리 관리 : Store the battery in a cool, dry place away from direct sunlight. Do not expose to extreme temperatures. Charge the battery fully before long-term storage to maintain its health.

7. 문제 해결

8. 사양

• 상표: 워크프로
• 모델: 20V Cordless Mini Circular Saw
• 전원: 배터리 구동식 (20V 리튬 이온)
• 배터리 용량: 4.0아아
• 무부하 속도: 4500 RPM
• 블레이드 직경: 4-1/2인치
• Max Cutting Depth (90°): 1-11/16인치
• Max Cutting Depth (45°): 1-1/8인치
• 품목 무게: 9.6 파운드
• 포함된 블레이드: 24T alloy (wood), 60T (wood/plastic), Diamond (tiles)
• 특별 기능: Dust Collection, Bevel Capability, Rechargeable Battery, Variable Speed, Depth Adjustment, Laser Guide

9. 보증

This WORKPRO 20V Cordless Mini Circular Saw comes with a 제한된 평생 보증.

Please refer to the warranty card included with your product or visit the official WORKPRO web전체 이용 약관에 대한 사이트.

10. 고객 지원

For technical assistance, replacement parts, or warranty claims, please contact WORKPRO customer support. Refer to the product packaging or the official WORKPRO web최신 연락처 정보는 사이트에서 확인하세요.