1. 제품 오버view
The AUTOPHIX JSC2100 is a super capacitor jump starter designed to provide a quick and reliable start for vehicles with a discharged battery. Unlike traditional battery-based jump starters, this unit utilizes super capacitor technology, allowing it to draw a small charge from the vehicle's weak battery or another power source and then rapidly discharge it to start the engine. It is suitable for a wide range of 12V vehicles.
The AUTOPHIX JSC2100 Super Capacitor Jump Starter is designed to provide a quick and reliable start for vehicles with a dead battery. It connects directly to the vehicle's battery terminals.
2. 안전 정보
본 제품을 사용하기 전에 모든 안전 정보를 읽고 숙지하십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다.
- Always wear eye protection and gloves when working with vehicle batteries.
- Do not allow the positive (+) and negative (-) clamp서로 만지려고 합니다.
- 장치를 물에 담그거나 폭우에 노출시키지 마십시오.
- Do not operate the unit if it has been damaged or modified.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 밀폐된 공간에서 작업할 때는 적절한 환기를 확보하십시오.
The JSC2100 incorporates ten safety features: Reverse Polarity Protection, High-Temperature Protection, Low-Temperature Protection, Zero Damage Protection, Reverse Charge Protection, Short Circuit Protection, Overcharge Protection, Over Discharge Protection, Overload Protection, and Low Voltage 보호.
3. 제품 구성품
Familiarize yourself with the different parts of your AUTOPHIX JSC2100 unit:
Key components of the JSC2100 include the clamps for battery connection, an LCD display for status, a start button, a USB charging port, a DC charging port, and an EC8 port for alligator clip cable connection.
- Clamps: For connecting to the vehicle battery terminals.
- LCD 디스플레이: 충전 상태 및 배터리 용량을 표시합니다.tage, and operational messages.
- 시작 버튼: Initiates the jump-starting process.
- USB 충전 포트 : For charging the unit via a USB power source.
- DC 충전 포트: For charging the unit via a 12V DC source (e.g., cigarette lighter).
- EC8 포트: Connector for the alligator clip cable.
4. 상자 안에 무엇이 들어있나요?
패키지에 모든 품목이 들어 있는지 확인하세요.
The package includes the JSC2100 Super Capacitor Jump Starter unit, EC8 Alligator Clamps, a Type-C USB cable, a cigarette lighter charging cable, and this instruction manual.
- 1x AUTOPHIX JSC2100 Super Capacitor Jump Starter
- 1x EC8 Alligator Clip Cable
- 1x 타입 C USB 케이블
- 1x Cigarette Lighter Charging Cable
- 1x 사용 설명서
5. 설정 및 충전
The JSC2100 does not require pre-charging like traditional jump starters. It charges rapidly from a weak battery or other sources just before use.
충전 방법
The unit can be charged using one of the following methods:
The JSC2100 can be charged using various methods, including a 12V car cigarette lighter socket, directly from a vehicle's battery using the alligator clamps, or via a standard USB power source.
- From Vehicle's 12V Battery (via Alligator Clamp에스): 빨간색 cl을 연결하세요amp 양극(+) 단자와 검은색 cl에amp to the negative (-) terminal of the vehicle's weak battery. The unit will begin to draw a small charge and prepare for jump-starting.
- From Vehicle's 12V Cigarette Lighter Socket: Connect the cigarette lighter charging cable to the DC charging port on the JSC2100 and plug the other end into the vehicle's 12V accessory socket.
- From USB Power Source: Connect the Type-C USB cable to the USB charging port on the JSC2100 and the other end to a standard USB power adapter (not included).
예상 충전 시간:
- 12V Charging: Approximately 5 minutes
- 6V Charging: Approximately 20 minutes
- 5V Charging: Approximately 30 minutes
6. 작동 지침 (점프 스타트)
Follow these steps to jump start your vehicle:
- 차량 준비: 차량의 시동이 꺼져 있고 모든 부속 장치(조명, 라디오, 에어컨)가 꺼져 있는지 확인하십시오. 주차 브레이크를 걸으십시오.
- Cl 연결amps:
- 연결하다 빨간색 양성(+) clamp 차량 배터리의 양극(+) 단자에 연결합니다.
- 연결하다 검정색 네거티브(-) clamp to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery and moving parts. Alternatively, connect to the negative (-) terminal of the battery if accessible and safe.
- Charge the Jump Starter: The JSC2100 will begin to charge itself from the vehicle's weak battery. Monitor the LCD display for the charging progress. Once fully charged (indicated on the display), the unit is ready.
- 차량 시동: Once the JSC2100 is fully charged, press the 'Start' button on the unit. Then, attempt to start your vehicle's engine. If the vehicle does not start immediately, wait a few minutes and try again.
- Cl을 분리하세요amps: Once the vehicle has started, disconnect the black negative (-) clamp first, followed by the red positive (+) clamp. Store the jump starter safely.
차량 호환성
The AUTOPHIX JSC2100 is suitable for 12V vehicles with engines up to 10.0L for gasoline and 8.0L for diesel.
This jump starter is compatible with a wide range of 12V vehicles, including cars, SUVs, motorcycles, business cars, vans, and pickup trucks, supporting engines up to 10.0L gas and 8.0L diesel.
7. 유지관리
To ensure the longevity and optimal performance of your AUTOPHIX JSC2100, follow these maintenance guidelines:
- 청소: 마른 부드러운 천으로 제품을 닦으십시오. 독한 화학 약품이나 연마성 세척제를 사용하지 마십시오.
- 저장: 점프 스타터는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 케이블 관리: 케이블과 연결부를 점검하세요amp손상, 마모 또는 부식 흔적이 있는지 정기적으로 확인하십시오. 필요한 경우 교체하십시오.
- No Internal Battery Maintenance: As a super capacitor unit, it does not require the same battery maintenance as traditional lead-acid or lithium jump starters.
8. 문제 해결
If you encounter issues with your JSC2100, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Unit does not charge or turn on. | Loose connections, completely dead battery, faulty charging cable. | Ensure all connections are secure. Try a different charging method (e.g., USB if using clamps). If the vehicle battery is completely dead (below 5V), it may not provide enough power to charge the super capacitors; try charging from another vehicle's battery or a power bank. |
| 점프 스타트를 시도했지만 차량 시동이 걸리지 않습니다. | Incorrect connection, insufficient charge, severe battery issue, other vehicle problems. | 확인amps are correctly attached (red to +, black to chassis/ground). Ensure the JSC2100 is fully charged before pressing 'Start'. If the problem persists, the vehicle may have other mechanical or electrical issues requiring professional diagnosis. |
| LCD display shows an error message. | Specific error condition (e.g., reverse polarity, over-temperature). | Refer to the specific error code on the display. Disconnect the unit, wait a few minutes, and reconnect, ensuring correct procedure. If it's a temperature error, allow the unit to cool down or warm up to within its operating range. |
9. 사양
- 모델: JSC2100
- 상표: 오토픽스
- 정점 Amp나이: 1000 Amps
- 권tage: 12 볼트
- 엔진 호환성: 가솔린 최대 10.0L, 디젤 최대 8.0L
- 작동 온도: -25°C ~ 70°C (-13°F ~ 158°F)
- 제품 크기: 30.5 x 28 x 7.5cm
- 원산지: 미국
The AUTOPHIX JSC2100 is designed to operate reliably in a wide range of temperatures, from -25°C (-13°F) to 70°C (158°F).
10. 보증 및 지원
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official AUTOPHIX web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.