소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light. This outdoor flood light features a motion sensor and dusk-to-dawn functionality, offering efficient and reliable illumination for various outdoor spaces. Please read these instructions thoroughly before installation and use to ensure proper function and safety.
이미지: 앞면 view of the Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light, showcasing its three adjustable heads and integrated motion sensor.
안전 정보
- 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
- 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
- Use only UL or ETL listed wire for connections.
- 젖은 손으로 또는 젖은 바닥에 서 있는 상태에서 이 조명기구를 설치하지 마십시오.amp 표면.
- 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
- This fixture is designed for outdoor use and is wet location rated (IP65).
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1 x Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light
- 장착 하드웨어(나사, 와이어 너트, 개스킷)
- 사용 설명서
설정 및 설치
This flood light is designed for hardwired, flush mount installation on a wall. Ensure the mounting surface is stable and can support the fixture's weight.
필요한 도구 (포함되지 않음):
- 드라이버
- 전선 스트리퍼
- 펜치
- 전기 테이프
- 안전 안경
설치 단계:
- 전원 끄기: Locate the circuit breaker controlling the outdoor lighting circuit and turn off the power. Verify power is off using a voltag전자 테스터.
- 장착 표면 준비: Ensure the electrical junction box is securely installed and accessible.
- Attach Mounting Back Plate: Secure the fixture's mounting back plate to the junction box using the provided screws. Ensure the gasket is properly seated between the back plate and the mounting surface for a weather-tight seal.
- 와이어 연결: Connect the fixture's wires to your household wiring. Match the wires:
- 블랙(라이브)에서 블랙(라이브)로
- 흰색(중성)에서 흰색(중성)으로
- 녹색 또는 맨 구리(접지)에서 녹색 또는 맨 구리(접지)로
- 마운트 고정 장치: Carefully align the fixture with the mounting back plate and secure it with the remaining screws. Ensure no wires are pinched.
- 봉인 (선택 사항이지만 권장): Apply a bead of silicone caulk around the perimeter of the fixture where it meets the mounting surface to prevent water intrusion.
- 복원력 : 회로 차단기를 다시 켜세요.
Image: Illustration of the hands-free wiring and mounting back plate, demonstrating how the fixture attaches to the wall for installation.
작동 지침
Your Feit Electric LED Security Flood Light is equipped with both a motion sensor and dusk-to-dawn technology for automated operation.
일몰부터 일출까지 기능:
The integrated photocell sensor automatically detects ambient light levels. The light will remain off during daylight hours and activate its motion sensing capabilities only when it gets dark. This ensures energy efficiency by preventing the light from operating unnecessarily during the day.
Image: A visual comparison illustrating the effect of dusk-to-dawn functionality, showing the light off during the day and on at night.
동작 감지 센서 작동:
Once the dusk-to-dawn sensor detects darkness, the motion sensor becomes active. It detects movement within a 180-degree range and up to 60 feet away. Upon detecting motion, the flood light will illuminate to its full 5000 lumens. After a period of no detected motion, the light will automatically turn off or dim down to 500 lumens if configured for lower light levels.
조명 헤드 조정:
The three LED light heads are independently adjustable, allowing you to direct the light output up to 270 degrees of coverage. Loosen the adjustment screws on each head, position the light as desired, and then securely tighten the screws.
유지
The Feit Electric LED Security Flood Light is designed for low maintenance and durability, featuring rugged, weather-resistant aluminum housing and shatter-resistant polycarbonate lenses.
청소:
- 청소하기 전에 전원이 꺼져 있는지 확인하십시오.
- 부드러운 천으로 고정물을 닦으세요.amp 옷감.
- Do not use abrasive cleaners or solvents, as these can damage the finish or lenses.
점검:
- Periodically inspect the fixture for any signs of damage to the housing or wiring.
- Check that the mounting remains secure.
Image: The flood light mounted on an exterior wall, demonstrating its robust construction and IP65 wet-location rating, capable of withstanding various weather conditions.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 밤에는 불이 켜지지 않습니다. | No power; Dusk-to-dawn sensor detecting too much light; Faulty wiring. | Check circuit breaker; Ensure no ambient light is interfering with the sensor; Verify wiring connections. |
| 낮에는 불이 켜져있습니다. | 일몰-일출 감지 센서가 막혔거나 고장났습니다. | Clear any obstructions from the sensor; If problem persists, contact support. |
| Motion sensor not detecting movement or range is poor. | Sensor obstructed; Incorrect sensor angle; Environmental factors (temperature, wind). | Clear obstructions; Adjust sensor angle for optimal coverage; Test in different conditions. |
| 예상치 못하게 불빛이 깜빡이거나 어두워집니다. | Loose wiring connection; Power fluctuations. | Check and secure all wiring connections; Consult an electrician if power fluctuations are suspected. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | S10.5TFL/850/MOT/BZ |
| 상표 | 피트 일렉트릭 |
| 전원 | 코드식 전기 |
| 권tage | 120볼트(AC) |
| 왓tage | 46 와트 |
| 명도 | 5000 Lumens (Adjustable 500-5000 Lumens) |
| 색온도 | 5000K 일광 |
| 광원 유형 | 주도의 |
| 모션 센서 | 180° 감지, 최대 60피트(20미터) 범위 |
| 황혼에서 새벽까지 | 예 |
| 조정 가능한 헤드 | Yes, up to 270° coverage |
| 재료 | Aluminum (Housing), Polycarbonate (Lens) |
| 제품 치수 | 10인치 길이 x 7.4인치 너비 x 8.3인치 높이 |
| IP 등급 | IP65 (습기 환경 등급) |
| 수명 | 50,000시간 |
| 장착 유형 | Wall Mount, Flush Mount |
| 한국어: | 017801763256 |
Image: A detailed diagram outlining the key specifications of the flood light, such as dimensions, wattage, brightness, color temperature, and IP rating.
보증
The manufacturer states that there is no explicit warranty description provided for this product. Please refer to your retailer's return policy or contact Feit Electric directly for any warranty-related inquiries.
고객 지원
For further assistance, technical support, or to inquire about replacement parts, please contact Feit Electric customer service.
You can also visit the official Feit Electric store for more information and products: Feit 전기 상점