ECOELER CDR615C

ECOELER 6-Inch LED Motion Sensor Ceiling Light

Model: CDR615C

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER 6-Inch LED Motion Sensor Ceiling Light, Model CDR615C. This fixture features 16W power, 1000 lumens brightness, 3CCT selectable color temperature, and an adjustable motion sensor with timer countdown. Please read this manual thoroughly before installation and use to ensure proper function and safety.

안전 정보

부상이나 손상을 예방하기 위해 다음 안전 예방 조치를 준수하세요.

  • 경고: 감전의 위험이 있습니다. 설치 또는 수리하기 전에 퓨즈 또는 회로 차단기의 전원을 차단하십시오.
  • 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
  • 모든 전기 연결이 안전한지 확인하고 현지 규정과 조례를 준수하세요.
  • 제품을 임의로 개조하지 마십시오. 개조 시 보증이 무효화될 수 있으며 안전상의 위험이 발생할 수 있습니다.
  • Do not install near heat sources or in areas with excessive moisture. This fixture is rated for indoor use.
  • 설치 시에는 안전 안경과 장갑을 착용하세요.

상자 안에 무엇이 들어있나요?

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

  • Motion sensor ceiling light fixture
  • E26 Adapter (for recessed can installation)
  • 장착 하드웨어(나사, 와이어 너트)
  • 사용 설명서(본 문서)
Contents of the ECOELER LED Motion Sensor Ceiling Light package, including the light fixture, E26 adapter, spring tabs, screws, and wire nuts, along with product dimensions.

Image: Included components and dimensions of the light fixture (7.48 inches diameter, 1.45 inches height).

제품 특징

The ECOELER LED Motion Sensor Ceiling Light is designed with advanced features for convenience and energy efficiency.

Diagram illustrating the key features of the ECOELER LED Motion Sensor Ceiling Light, including Passive Infrared (PIR) motion sensor, 3 color temperatures (3000K, 4000K, 5000K), and adjustable time delay.

이미지: 이상view of product features including PIR Motion Sensor, 3 Color Temperatures, and Time Delay adjustment.

3CCT Selectable Color Temperature

This fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). You can easily select your preferred lighting ambiance by adjusting a switch located inside the lamp그늘. Note: This light is non-dimmable.

Image showing the ECOELER LED Motion Sensor Ceiling Light with three selectable color temperatures: 3000K Warm White, 4000K Cool White, and 5000K Daylight.

Image: Visual representation of 3000K, 4000K, and 5000K color temperatures.

모션 센서 기능

The integrated Passive Infrared (PIR) motion sensor automatically detects movement within its range. The light will turn on when motion is sensed and ambient light conditions are dark enough. It will remain off in bright environments to save energy.

조정 가능한 시간 지연

The light features an adjustable time delay, allowing you to set how long the light remains on after motion stops. Options include 30 seconds, 1 minute, and 5 minutes.

Illustration demonstrating the adjustable time delay feature of the ECOELER LED Motion Sensor Ceiling Light, showing options for 30 seconds, 1 minute, and 5 minutes.

Image: A person walking under the light, illustrating the countdown timer for 30 seconds, 1 minute, and 5 minutes.

설치 지침

Before installation, ensure the power supply is turned off at the circuit breaker. This fixture can be installed in a junction box or a recessed can.

Diagrams illustrating two installation methods for the ECOELER LED Motion Sensor Ceiling Light: Junction Box Installation for 3.5 or 4-inch J-Box, and Recessed Can Installation for 5 or 6-inch cans.

Image: Installation diagrams for Junction Box and Recessed Can.

Junction Box Installation (3.5 or 4-inch J-Box)

  1. 회로 차단기에서 전원을 끄세요.
  2. Remove the existing fixture from the junction box.
  3. Connect the fixture's wires to the junction box wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
  4. Secure the fixture to the junction box using the provided screws.
  5. Ensure the fixture is flush with the ceiling.
  6. 전원을 복구하고 조명을 테스트합니다.

Recessed Can Installation (5 or 6-inch Can)

  1. 회로 차단기에서 전원을 끄세요.
  2. If applicable, remove the existing bulb and trim from the recessed can.
  3. Screw the E26 adapter into the recessed can's socket.
  4. Connect the fixture's wires to the E26 adapter's wires using the provided wire nuts.
  5. Attach the spring tabs (if not pre-attached) to the fixture.
  6. Gently push the fixture into the recessed can until the spring tabs secure it in place.
  7. 전원을 복구하고 조명을 테스트합니다.

작동 지침

색온도(CCT) 조정

색온도를 변경하려면:

  1. 전원이 꺼져 있는지 확인하세요.
  2. Carefully open or remove the lamp그늘.
  3. Locate the CCT selection switch on the fixture's circuit board.
  4. Slide the switch to your desired setting: 3000K, 4000K, or 5000K.
  5. l 다시 부착amp안전하게 그늘을 만드세요.
  6. 전원을 복구합니다.

시간 지연 설정

To adjust the time the light stays on after motion ceases:

  1. 전원이 꺼져 있는지 확인하세요.
  2. Carefully open or remove the lamp그늘.
  3. Locate the time delay switch on the fixture's circuit board.
  4. Slide the switch to your desired setting: 30 seconds, 1 minute, or 5 minutes.
  5. l 다시 부착amp안전하게 그늘을 만드세요.
  6. 전원을 복구합니다.

모션 센서 작동

The motion sensor operates based on ambient light levels and detected movement:

  • 낮: The light will remain OFF even if motion is detected, conserving energy.
  • Nighttime/Dark Environments: The light will automatically turn ON when motion is sensed within its detection range (9-16 feet).
  • 자동 차단 : After motion stops, the light will turn OFF after the pre-set time delay (30s, 1min, or 5min).
Sequence of images explaining the motion sensor operation: light off during daytime, automatic turn on in dark when motion is detected, and automatic turn off after selected time.

Image: Visual guide to motion sensor behavior during day and night.

유지

To ensure optimal performance and longevity of your ECOELER LED Motion Sensor Ceiling Light, follow these simple maintenance guidelines:

  • 청소: 청소하기 전에 전원을 분리하세요. 부드럽고 건조하거나 약간 습한 천을 사용하세요.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
  • 점검: Periodically check for any loose connections or signs of damage. If any issues are found, consult a qualified electrician.
  • 전구 교체: This LED fixture does not have user-replaceable bulbs. The LED components are designed for long-term use.

문제 해결

If you encounter issues with your light, refer to the table below for common problems and solutions:

문제가능한 원인해결책
조명이 켜지지 않습니다.No power; Sensor not detecting motion; Ambient light too bright; Incorrect wiring.Check circuit breaker; Ensure motion is within range; Verify ambient light is dark enough; Check wiring connections.
표시등이 계속 켜져 있습니다.Constant motion detected; Time delay set too long; Sensor malfunction.Ensure no continuous motion; Adjust time delay setting; Contact support if issue persists.
빛이 깜빡이거나 어두워집니다.Loose wiring; Voltage fluctuations; Fixture damage.Check all wiring connections; Consult an electrician for voltage issues; Contact support if damaged.
Motion sensor is not responsive.Sensor obstructed; Incorrect sensitivity; Ambient light too bright.Clear any obstructions; Ensure ambient light is low; Sensor sensitivity is fixed for this model.

명세서

상표에코엘러
모델 번호CDR615C
왓tage16 와트
명도1000루멘
색온도3000K Warm White, 4000K Cool White, 5000K Daylight (Selectable)
권tage120 볼트
제어 방법모션 센서
모션 센서 범위9-16피트
시간 지연 설정30 seconds, 1 minute, 5 minutes (Adjustable)
재료아크릴, 알루미늄
치수(길이 x 너비 x 높이)7.48인치 x 1.45인치 x 7.48인치
설치 유형Flush Mount (Junction Box or Recessed Can)
인증ETL, FCC Listed
실내/실외 사용실내

보증 및 지원

보증 정보: All ECOELER products come with a 1-year warranty from the date of purchase. For any non-man-made damage under normal use, please contact our support team for a replacement solution.

고객 지원: If you have any questions, require assistance with installation, or need to claim your warranty, please visit the official ECOELER store or contact our customer service team. You can find more information and contact details on the ECOELER Brand Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.