ELAC Varro Dual Reference DS1200 Powered Subwoofer User Manual

1. 서론

구매해주셔서 감사합니다asing the ELAC Varro Dual Reference DS1200 Powered Subwoofer. This manual provides essential information for the proper setup, operation, and maintenance of your new subwoofer. Please read these instructions thoroughly before use to ensure optimal performance and safety.

2. 안전 지침

전원: 서브우퍼는 지정된 용량의 AC 전원 콘센트에만 연결하십시오.tage (100-240V AC, 50/60Hz).
통풍: Ensure adequate ventilation around the subwoofer. Do not block any ventilation openings. Maintain a minimum distance of 4 inches (10 cm) from walls or other objects.
놓기: Place the subwoofer on a stable, level surface. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity or dust.
물과 습기: Do not expose the subwoofer to water or moisture. Do not place objects filled with liquids, such as vases, on or near the unit.
케이블 : 전원 코드가 밟히거나 끼이지 않도록 보호하십시오. 콘센트에서 코드를 뽑을 때 잡아당기지 마십시오.
서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
청소: 청소하기 전에 전원 코드를 뽑으십시오. 부드럽고 마른 천을 사용하십시오. 액체 세척제나 에어로졸 스프레이는 사용하지 마십시오.

3. 패키지 내용

모든 품목이 포장에 들어 있는지 확인하세요.

ELAC Varro Dual Reference DS1200 Powered Subwoofer
전원 코드
사용 설명서 (본 문서)

4. 제품 오버view

앞쪽 View

ELAC Varro DS1200 Subwoofer front view with exposed 12-inch woofer

그림 4.1: 전면 view of the ELAC Varro DS1200 subwoofer, showcasing the 12-inch HEX surround woofer and gloss black finish.

ELAC Varro DS1200 Subwoofer front view 그릴이 부착된

그림 4.2: 전면 view of the ELAC Varro DS1200 subwoofer with the protective grille attached, maintaining its sleek appearance.

후면 패널 및 연결 단자

ELAC Varro DS1200 Subwoofer rear panel with various input and output connections

Figure 4.3: Rear panel of the ELAC Varro DS1200 subwoofer, detailing the input/output options and controls.

The rear panel provides all necessary connections for integrating the subwoofer into your audio system. Key connections include:

RCA 입력: Standard unbalanced inputs for connecting to most AV receivers or pre-amp정수기.
Balanced XLR Inputs: Professional-grade balanced inputs for longer cable runs and reduced noise interference.
스피커 레벨 입력: Allows connection directly from your amplifier's speaker outputs, useful for systems without dedicated subwoofer outputs.
12V 트리거: For automatic power on/off synchronization with other components.
이더넷 포트 : For third-party control systems and network connectivity.
USB 포트: 펌웨어 업데이트용.
전원 인렛: 포함된 전원 코드를 연결합니다.

옆 View

ELAC Varro DS1200 Subwoofer side view 그릴이 부착된

그림 4.4: 측면 view of the ELAC Varro DS1200 subwoofer, highlighting its compact design with the grille in place.

5. 설정

5.1 배치

Subwoofer placement significantly impacts bass performance. Experiment with different locations in your room to find the best balance of output and smoothness. Common placement options include:

코너 배치: Often provides the most output but can sometimes lead to boomy bass.
전면 벽 배치: Near the main speakers, can improve integration with the front soundstage.
Mid-Room Placement: Can offer smoother bass response but may require more power.

Consider using the 'subwoofer crawl' method: place the subwoofer in your primary listening position, play bass-heavy music, and crawl around the room to find where the bass sounds best. That location is often ideal for the subwoofer.

5.2 시스템에 연결하기

연결하기 전에 모든 오디오 장비의 전원이 꺼져 있는지 확인하십시오.

RCA/XLR Connection (Recommended for AV Receivers)

Connect an RCA or XLR cable from your AV receiver's 'Subwoofer Out' or 'LFE Out' to the corresponding RCA or XLR input on the DS1200 subwoofer.
If using a stereo pre-amplifier with a dedicated subwoofer output, connect it similarly.

Speaker-Level Connection (For Amplifiers without Subwoofer Output)

스피커 선을 연결하세요. amplifier's left and right speaker outputs to the 'Speaker Level Input' terminals on the DS1200.
Then, connect your main speakers to the 'Speaker Level Output' terminals on the DS1200. Ensure correct polarity (+ to + and - to -).

5.3 전원 연결

Connect the included power cord to the power inlet on the rear of the subwoofer.
전원 코드의 다른 쪽 끝을 적절한 AC 벽면 콘센트에 꽂습니다.

6. 운영

6.1 초기 전원 켜기

After making all connections, switch on the power to the subwoofer. The power indicator light will illuminate. If your receiver has an auto-setup feature (e.g., Audyssey, MCACC, YPAO), run it now to calibrate the subwoofer with your system.

6.2 기본 조정

For initial listening, set the subwoofer's volume to a moderate level. Adjust the crossover frequency and phase settings as needed. For precise control and optimization, utilize the ELAC Varro App.

7. App Control and Auto EQ

The ELAC Varro DS1200 features advanced control and room correction capabilities via a dedicated smartphone application.

7.1 앱 다운로드

Download the 'ELAC Varro' app from the Apple App Store (for iOS devices) or Google Play Store (for Android devices).

7.2 Connecting to the Subwoofer

스마트폰의 Bluetooth가 활성화되어 있는지 확인하세요.
Open the ELAC Varro app. The app will search for available ELAC subwoofers.
Select your DS1200 from the list to establish a connection.

7.3 앱 기능

The app provides comprehensive control over your subwoofer's settings, including:

볼륨 조절: Precise adjustment of output level.
크로스오버 주파수: Set the upper frequency limit for the subwoofer.
위상 제어 : Adjust the phase to ensure seamless integration with your main speakers.
파라 메트릭 EQ : Fine-tune specific frequency bands to address room acoustics.
자동 EQ: Utilizes your smartphone's microphone to measure and automatically correct the subwoofer's response for your room, optimizing bass performance.

8. 유지관리

8.1 청소

To clean the subwoofer, first disconnect it from the power outlet. Use a soft, dry, lint-free cloth to wipe the surfaces. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

8.2 일반 관리

Periodically check all cable connections to ensure they are secure. Avoid placing heavy objects on the subwoofer or exposing it to extreme temperatures.

9. 문제 해결

If you experience issues with your ELAC Varro DS1200 subwoofer, refer to the following common problems and solutions:

문제	가능한 원인	해결책
서브우퍼에서 소리가 나지 않습니다	전원 코드가 분리됨 서브우퍼 전원이 켜지지 않음 입력 케이블이 헐거워졌거나 불량입니다. 볼륨이 너무 낮습니다 Receiver settings incorrect	전원 코드 연결 확인 전원 스위치가 켜져 있는지 확인하세요 오디오 케이블 연결을 확인하세요 서브우퍼 볼륨을 높이세요 Check receiver's subwoofer output and level settings
왜곡되거나 웅웅거리는 저음	Subwoofer volume too high Incorrect crossover/phase settings Poor room acoustics	서브우퍼 볼륨을 줄이세요 Adjust crossover and phase settings via app Use Auto EQ feature in the app Experiment with subwoofer placement
App cannot connect to subwoofer	Bluetooth disabled on device 서브우퍼 전원이 켜지지 않음 App requires restart	스마트 폰에서 블루투스 활성화 Ensure subwoofer is powered on Close and reopen the ELAC Varro app

If the problem persists after trying these solutions, please contact ELAC customer support.

10. 사양

The following are the technical specifications for the ELAC Varro Dual Reference DS1200 Powered Subwoofer:

모델: Varro Dual Reference DS1200
스피커 유형: 파워드 서브 우퍼
우퍼 직경: 듀얼 12인치
Amp리파이어 파워: 1200와트 RMS (2400와트 피크)
주파수 응답: 17Hz-150Hz (Anechoic) / 14Hz-150Hz (In-Room)
연결 기술 : Wired (RCA, XLR, Speaker Level, Ethernet, USB)
제어 방법: 앱 제어
추가 기능: App Control, Auto EQ, 12V Trigger
색상: 광택 블랙
품목 치수(깊이 x 너비 x 높이): 약 25" x 22.25" x 25" (63.5cm x 56.5cm x 63.5cm)
품목 무게: 98파운드(44.45kg)
전원: 코드식 전기
입력 Voltage: 12 Volts (for trigger)
한국어: 853720006698

ELAC Varro DS1200 Subwoofer dimensions diagram showing 25 inches depth, 22.25 inches height, and 25 inches width

Figure 10.1: Approximate dimensions of the ELAC Varro DS1200 subwoofer.

11. 보증 및 지원

11.1 제한 보증

The ELAC Varro Dual Reference DS1200 Powered Subwoofer comes with a 1년 제한 보증. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

11.2 고객 지원

For technical assistance, warranty inquiries, or service requests, please visit the official ELAC website or contact your authorized ELAC dealer. Please have your model number (DS1200) and serial number ready when contacting support.

ELAC DS1200