DEVMO 80525S30941

DEVMO Ambient Air Temperature Sensor 80525-S30-941 User Manual

모델: 80525S30941

1. 서론

This manual provides essential information for the installation, operation, and maintenance of your DEVMO Ambient Air Temperature Sensor, model 80525S30941. This sensor is designed to accurately measure the outside ambient air temperature for your vehicle's climate control and engine management systems. It is a direct replacement part manufactured from high-quality ABS plastic for durability and long-lasting performance.

DEVMO Ambient Air Temperature Sensor

Image 1.1: The DEVMO Ambient Air Temperature Sensor, model 80525S30941, showing its overall design.

2. 호환성

This sensor is compatible with various vehicle models. Please verify your vehicle's specific requirements before installation.

  • RL, ILX, RDX, TL, RSX, MDX
  • Accord (2011-2012), Accord Crosstour (2011)
  • Civic (2011-2013)
  • CR-V (2013-2014)
  • CR-Z (2013-2014)
  • Insight (2012-2014)
  • Odyssey, Pilot, S2000
  • Ridgeline (2012-2014)
  • Fit (2013-2014)

교체 부품 번호: 80525-S30-941 / 80525S30941.

3. 설정 및 설치

The DEVMO Ambient Air Temperature Sensor is designed for direct replacement. Professional installation is recommended. Always consult your vehicle's service manual for specific instructions regarding sensor location and removal procedures.

  1. 안전이 최우선입니다. Ensure the vehicle is turned off and the battery is disconnected before beginning any work to prevent electrical hazards.
  2. 이전 센서 찾기: Refer to your vehicle's service manual to identify the exact location of the existing ambient air temperature sensor. This is typically located near the front bumper, grille, or radiator support.
  3. 배선 분리: 기존 센서에서 전기 커넥터를 조심스럽게 분리하세요. 전선을 직접 잡아당기지 마세요.
  4. 오래된 센서 제거: Unmount the old sensor from its bracket or housing. This may involve unbolting, unclipping, or twisting the sensor.
  5. 새로운 센서 설치: Position the new DEVMO sensor in the same location and secure it using the original mounting hardware or clips.
  6. 배선 연결: 새 센서에 전기 커넥터를 다시 연결하고, 단단하고 안정적으로 고정되었는지 확인하십시오.
  7. 배터리를 다시 연결하십시오: 차량 배터리를 다시 연결합니다.
  8. 테스트 기능: Start the vehicle and verify that the ambient air temperature reading on your dashboard or climate control system is accurate.
Sensor Electrical Connector

이미지 3.1: 클로즈업 view of the sensor's electrical connector pins, ensuring proper connection.

Sensor Mounting Flange

이미지 3.2: View of the sensor's mounting flange, designed for secure installation.

4. 운영

The DEVMO Ambient Air Temperature Sensor continuously monitors the temperature of the air outside your vehicle. This data is crucial for several vehicle systems, including:

  • 기후 조절: Provides input for automatic climate control systems to adjust cabin temperature.
  • Engine Management: Assists the engine control unit (ECU) in optimizing fuel mixture and engine performance based on ambient conditions.
  • 대시보드 디스플레이: Displays the outside temperature on your vehicle's instrument cluster.
Diagram of various automotive sensors in a car

Image 4.1: Diagram illustrating the location and function of various sensors within a vehicle, including temperature sensors.

5. 유지관리

The DEVMO Ambient Air Temperature Sensor is designed for minimal maintenance. However, periodic inspection can help ensure its longevity and accurate performance:

  • 시각적 검사: Periodically check the sensor for any visible damage, corrosion, or debris accumulation.
  • 청결: If accessible, gently clean any dirt or road grime from the sensor's exterior using a soft cloth. Avoid harsh chemicals or abrasive materials.
  • 배선 점검: Ensure the electrical connector remains securely attached and that the wiring is free from fraying or damage.

6. 문제 해결

If you experience issues with your ambient air temperature readings, consider the following troubleshooting steps:

  • 온도 표시 오류:
    • Verify the sensor is securely connected.
    • Check for any visible damage to the sensor or its wiring.
    • Ensure the sensor is not obstructed by debris or positioned in a location that would give an inaccurate reading (e.g., too close to the engine heat).
  • 온도 측정 없음:
    • Confirm the electrical connector is fully seated.
    • Inspect the wiring for breaks or disconnections.
    • A diagnostic scan tool may be required to check for fault codes related to the sensor.

If problems persist after basic troubleshooting, professional automotive diagnosis and repair may be necessary.

7. 사양

특징사양
상표DEVMO
모델 번호80525S30941
재료아크릴로니트릴 부타디엔 스티렌(ABS)
품목 무게0.08킬로그램(약 2.82온스)
측정 정확도±1.5%
측정 범위-40도에서 250도 섭씨 (-40도에서 482도 화씨)
장착 유형플랜지 마운트
출력 유형Push Button (refers to connector type)
제조업체 부품 번호80525S30941
한국어:765147955322

8. 보증 및 지원

This DEVMO Ambient Air Temperature Sensor comes with a 12개월 보증 구매일로부터.

For any questions, concerns, or warranty claims, please contact DEVMO customer support directly through the Amazon Message system. Please provide your order details and a description of the issue for prompt assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.