소개
Thank you for choosing the VAXCEL T0697 Bronze Motion Sensor Outdoor Security Flood Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new security light. Please read all instructions carefully before installation and retain this manual for future reference.
Image: The VAXCEL Bronze Motion Sensor Outdoor Security Flood Light mounted on the exterior of a house, illuminating the area.
안전 정보
- 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
- 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
- Use only UL or ETL listed wire for connections.
- 가연성 물질 근처에 설치하지 마십시오.
- 모든 연결 부분이 안전하고 적절히 절연되어 있는지 확인하세요.
상자 안에 무엇이 들어있나요?
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Security Flood Light Fixture
- 장착 하드웨어
- 그늘
- 사용 설명서
Note: Light bulbs (2 x 150 watt PAR 38 medium base E26 screw-in bulbs) are not included. LED compatible.
설정 및 설치
This VAXCEL security light is designed for hardwired installation and can be mounted to a wall or eave. Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight.
장착 옵션
The fixture offers flexible mounting options, allowing for installation on either a wall or an eave. The light heads and motion sensor are adjustable to direct light where needed most.
Image: A diagram illustrating the flexibility of the VAXCEL flood light, showing how it can be mounted on a wall or an eave, with arrows indicating the rotatable light heads and sensor joint for optimal positioning.
배선 지침
- 회로 차단기나 퓨즈 박스에서 전원을 끄세요.
- Attach the mounting bracket to the junction box using the provided hardware.
- Connect the fixture's wires to the household wiring: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Secure connections with wire nuts.
- 모든 전선을 정션 박스에 조심스럽게 밀어 넣습니다.
- Mount the fixture to the mounting bracket, ensuring a tight seal against the mounting surface to prevent water intrusion.
- Install two PAR38 E26 base bulbs (not included) into the sockets.
- 회로 차단기에서 전원을 복구하세요.
제품 치수
Image: A technical drawing providing the precise measurements of the VAXCEL flood light fixture, indicating its length, width, and height for installation planning.
작동 지침
Your VAXCEL security flood light features advanced motion sensing and dusk-to-dawn capabilities, offering multiple modes for customized security and energy efficiency.
Image: A visual representation of the three primary operational modes of the VAXCEL flood light: motion sensor activation, automatic dusk-to-dawn operation, and manual switch control.
모션 센서 기능
- 감지 범위: The sensor detects motion within a 240-degree range and up to 85 feet.
- 조정 가능한 감도: The motion sensitivity can be adjusted to cover distances up to 85 feet, preventing false triggers from distant objects.
- 동작 감지 자동 꺼짐 지연: Customize how long the light stays on after motion is detected, with settings from 5 seconds to 3 minutes.
Image: A graphic demonstrating the wide 240-degree detection angle and adjustable range (10-85 feet) of the motion sensor, highlighting its effectiveness in various outdoor settings including around corners and along walls.
Dusk-to-Dawn Photocell
The integrated photocell automatically turns the fixture on when it gets dark and off when it becomes light, providing continuous security and saving energy during daylight hours.
Dual-Level Brightness & Modes
- Low-Level Brightness: The light can operate at approximately 30% brightness during periods of no motion.
- High-Level Brightness: Upon motion detection, the light automatically switches to 100% brightness.
- 초저녁 타이머: Set the light to stay on at low-level brightness for 0, 3, or 6 hours after dusk before switching to motion-only mode.
- 5가지 자동 모드: Further customize the light's behavior with five distinct operational modes to suit your specific security needs.
Image: A detailed graphic outlining the fully customizable settings of the VAXCEL flood light, including options for motion shut-off delay, sensitivity, early evening timer, various operating modes, and the dual-level brightness feature.
유지
- 청소: 부드러운 천으로 조명기구를 청소하십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 전구 교체: Ensure power is off before replacing bulbs. Use two 150-watt maximum PAR38 E26 medium base screw-in bulbs. LED compatible bulbs can be used for energy efficiency.
- 내구성: The fixture is constructed from weather-resistant plastic material, suitable for outdoor use in various conditions.
Image: The VAXCEL flood light shown enduring rain and snow, emphasizing its robust outdoor durability and weather-resistant construction.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | No power; faulty bulb; sensor malfunction. | Check circuit breaker. Replace bulbs. Ensure sensor is clean and unobstructed. |
| 표시등이 계속 켜져 있습니다. | Sensor in test mode; continuous motion detected; wiring error. | Check sensor mode. Remove obstructions. Verify wiring connections. |
| 빛이 번쩍이거나 깜빡거립니다. | Loose wiring; incompatible bulb; power fluctuations. | Check all wiring connections. Use recommended bulbs. Consult an electrician if power issues persist. |
| 모션 센서가 감지되지 않습니다. | Sensor obstructed; incorrect sensitivity setting; improper angle. | Clear obstructions. Adjust sensitivity. Reposition sensor for optimal coverage. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 백셀 |
| 모델명 | T0697 |
| 색상 | 청동 |
| 재료 | 플라스틱 |
| 제품 치수 | 8.75인치 길이 x 11.75인치 너비 x 8인치 높이 |
| 실내/실외 사용 | 집 밖의 |
| 전원 | 하드와이어드 |
| 설치 유형 | Wall Mounted (also Eave Mount) |
| 특별 기능 | 높이 조절 가능 헤드, 일몰/일출 감지 센서, 동작 감지 센서 |
| 모션 센서 범위 | 240 Degree, 85 Ft. |
| 전구베이스 | E26 미디엄 |
| 왓tage(최대) | 2 x 150 watts (bulbs not included) |
| 권tage | 120 볼트 |
| 방수 레벨 | 방수제 |
| 인증 | ETL 등록됨 |
보증
This VAXCEL product comes with a limited warranty. Please refer to the warranty card included in your packaging for specific terms and conditions, or visit the VAXCEL web자세한 내용은 사이트를 참조하십시오.
제품 비디오
끝까지 이 비디오를 시청하세요view of VAXCEL lighting products, showcasing various styles and applications.
Video: An informational video titled "About Vaxcel Lighting" providing a general overview of VAXCEL's lighting solutions.
고객 지원
For further assistance, technical support, or warranty claims, please contact VAXCEL customer service. Contact information can typically be found on the VAXCEL web사이트 또는 제품 포장에 표시되어 있습니다.