Sunco Lighting SH_F-BK-40W-5K-1PK

Sunco LED Shop Light Instruction Manual

Model: SH_F-BK-40W-5K-1PK

1. 제품 오버view

The Sunco LED Shop Light is a 4-foot, 40W (150W equivalent) integrated fixture designed for bright, efficient illumination in various indoor settings. It provides 4500 lumens of 6000K Daylight Deluxe light, suitable for workshops, garages, basements, and other spacious areas. This fixture is linkable, allowing up to four units to be connected for extended coverage. It supports both surface and suspension mounting for flexible installation.

Sunco LED Shop Light features: High-quality LED chip, 40W, 4500LM, Linkable Up To 4 Lights, with a 5 FT cable and in-line switch.

Image 1.1: Key features of the Sunco LED Shop Light, highlighting its efficiency and linkability.

비디오 1.1: 오버view of the Sunco V5 White Utility Shoplight, demonstrating its design and applications.

2. 안전 정보

  • 설치, 유지관리 또는 청소를 하기 전에는 항상 전원을 분리하세요.
  • 전원 볼륨 확인tage matches the fixture's requirements (120V).
  • This fixture is designed for indoor use only and is not water resistant. Avoid installation in wet locations.
  • Do not attempt to modify or disassemble the fixture. This may void the warranty and create safety hazards.
  • Handle with care to prevent damage to the frosted cover and internal components.
  • 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전기 기술자에게 문의하십시오.

3. 상자 안에 무엇이 들어있나요?

Each Sunco LED Shop Light package includes the following components:

  • LED Shop Light Fixture (Integrated with 5' cord and 10" pull chain switch)
  • 장착 하드웨어:
    • Hanging Chains (for suspension mount)
    • Screws and Wall Anchors (for surface mount)
    • Connectors (for linking multiple fixtures)
Contents of the Sunco LED Shop Light box, showing the light fixture, hanging chains, screws, and wall anchors for both surface and hanging mounts.

Image 3.1: Included components for installation, featuring both surface and hanging mount hardware.

4. 설치 지침

The Sunco LED Shop Light offers two primary installation methods: suspension (hanging) mount and surface (flush) mount. Choose the method best suited for your application.

4.1. Suspension (Hanging) Mount

  1. 장착 표면 준비: Identify the desired location for your light fixture. Ensure the ceiling or beam can support the weight of the fixture.
  2. Install Hanging Hooks: Screw the provided hanging hooks into the ceiling or beam at appropriate intervals to support the fixture evenly.
  3. 체인을 연결하세요: Connect the hanging chains to the hooks and then to the mounting points on the fixture. Adjust the chain length to achieve the desired hanging height.
  4. 전원 연결: Plug the fixture's power cord into a standard 120V outlet. If connecting to an existing junction box, ensure power is off at the circuit breaker before wiring.
Sunco LED Shop Light installed using hanging chains in a workshop setting.

이미지 4.1: Example of a hanging mount installation in a garage or workshop.

4.2. Surface (Flush) Mount

  1. 마크 장착 지점: Hold the fixture against the desired surface (ceiling or wall) and mark the locations for the mounting screws.
  2. 드릴 파일럿 홀: Drill pilot holes at the marked locations. If mounting into drywall, insert the provided wall anchors.
  3. 보안 고정 장치: Align the fixture with the pilot holes and secure it using the provided screws.
  4. 전원 연결: Plug the fixture's power cord into a standard 120V outlet. If connecting to an existing junction box, ensure power is off at the circuit breaker before wiring.

4.3. Linking Multiple Fixtures (Daisy Chain)

You can connect up to 4 Sunco LED Shop Lights together to create an extended lighting system. This is ideal for larger areas requiring more comprehensive illumination.

  1. Install First Fixture: Install the first LED shop light using either the suspension or surface mount method.
  2. Connect Subsequent Fixtures: Use the provided linking connectors to attach additional fixtures to the end of the previously installed one. Ensure a secure connection.
  3. Secure All Fixtures: Ensure all linked fixtures are securely mounted to the ceiling or wall using the appropriate hardware.
  4. 전원 켜기: Once all connections are secure and fixtures are mounted, plug the main power cord into an outlet. All linked fixtures will operate from a single power source and the pull chain switch on the first fixture.
Multiple Sunco LED Shop Lights linked together in a garage, demonstrating the 'Link & Shine System'.

Image 4.2: Multiple fixtures linked together for expanded lighting coverage.

5. 사용 설명서

The Sunco LED Shop Light is equipped with a convenient pull chain switch for easy operation.

  • 켜기/끄기: Gently pull the chain switch located on the fixture to turn the light on or off. If multiple fixtures are linked, pulling the chain on the first fixture will control all connected lights.
  • 전원 코드: The fixture includes a 5-foot power cord for direct plug-and-play functionality.
Close-up of the pull chain switch on the Sunco LED Shop Light.

Image 5.1: The integrated pull chain switch for simple operation.

6. 유지관리

The Sunco LED Shop Light is designed for minimal maintenance and a long lifespan of 50,000 hours.

  • 청소: Ensure the fixture is turned off and cool before cleaning. Use a soft, dry or slightly damp 천으로 외부를 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오.
  • 전구 교체: This fixture features integrated LED tubes and does not require bulb replacement.
  • 점검: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact customer support.
Graphic illustrating the 50,000-hour lifespan of the Sunco LED Shop Light.

Image 6.1: The long lifespan of the LED shop light ensures minimal maintenance.

7. 문제 해결

If you encounter issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:

문제가능한 원인해결책
조명이 켜지지 않습니다.콘센트에 전원이 들어오지 않습니다.
연결이 느슨함.
줄을 당겨서 작동하는 스위치가 고장났습니다.
Check the circuit breaker and ensure the outlet is functional.
전원 코드가 제대로 꽂혀 있는지 확인하십시오.
Ensure the pull chain is fully engaged. If the issue persists, contact customer support.
빛이 깜박입니다.불안정한 전력 공급.
배선 연결이 느슨합니다.
전원 공급이 안정적인지 확인하세요.
Check all connections. If flickering continues, contact customer support.
연동 조명이 작동하지 않습니다.Loose linking connector.
연결 가능한 최대 유닛 수를 초과했습니다.
Ensure all linking connectors are securely attached.
Do not link more than 4 fixtures together.

8. 사양

특징세부 사항
상표Sunco 조명
모델 번호SH_F-BK-40W-5K-1PK
광원LED(통합)
왓tage40와트(150W 상당)
명도4500루멘
색온도6000K Daylight Deluxe
권tage120 볼트
치수(길이 x 너비 x 높이)48인치 길이 x 4인치 너비 x 2인치 높이
무게1.28 파운드
재료Plastic (Frosted Cover)
장착 유형Surface Mount, Hanging (Suspension)
연결성최대 4개의 비품
제어 방법풀 체인 스위치
실내/실외 사용실내에서만 사용 가능
수명50,000시간
인증Energy Star, ETL, FCC
Detailed dimensions of the Sunco LED Shop Light: 47 inches long, 4 inches wide, 2 inches high.

이미지 8.1: 차원 view of the LED shop light fixture.

9. 보증 및 지원

Sunco Lighting은 다음과 같은 서비스를 제공합니다. 7년 제조사 보증 for this product, ensuring peace of mind regarding your purchase. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support.

Graphic highlighting Sunco's commitment: 50 million lights sold, 25+ years of lighting expertise, American company.

Image 9.1: Sunco Lighting's commitment to quality and customer satisfaction.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.