1. 서론
The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.
Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.
2. 제품 오버view
2.1 주요 특징
- Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
- 정확하고 빠른 결과: Provides quick and precise measurements of SpO2 and pulse rate.
- 명확한 전시: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
- 간편한 조작: Simple one-button operation for power on and measurement.
- 편안한 디자인: Fingertip clip made with silica gel material for comfort.
- 긴 배터리 수명: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.
2.2 상자 내용물
- CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
- 매는 밧줄
- 사용자 설명서
- 만화 스티커
- (배터리 칸용) 드라이버
2.3 제품 구성품
This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.
3. 설정
3.1 배터리 설치
- Locate the battery compartment on the back of the oximeter.
- 제공된 드라이버를 사용하여 배터리 덮개의 나사를 풀어주세요.
- 배터리 덮개를 밀어서 떼어냅니다.
- AAA 배터리 2개(별도 구매)를 배터리 칸에 넣을 때, 극성(+/-)을 정확히 확인하십시오.
- Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.
This image demonstrates the battery installation process and subsequent steps for taking a measurement.
3.2 랜야드 부착하기
Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.
This image shows the device dimensions and how to attach the included lanyard.
4. 사용 설명서
4.1 측정하기
- Ensure the oximeter has batteries installed.
- Open the clip of the oximeter.
- Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
- Press the power button once to turn on the oximeter.
- Keep your hand still and avoid movement during the measurement.
- The SpO2 and pulse rate readings will appear on the display within a few seconds.
4.2 화면 방향
The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.
This image demonstrates the rotatable display feature of the oximeter.
4.3 자동 전원 끄기
The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.
5. 디스플레이 정보
The TFT display provides the following information:
- SpO2 (%): 혈중 산소 포화도.
- PRbpm: 분당 맥박수.
- 막대 그래프: 맥박 강도를 시각적으로 나타낸 그림.
- 펄스 파형: A graphical representation of the pulse.
- 배터리 부족 표시기: An icon indicating when batteries need replacement.
This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.
6. 유지관리 및 관리
6.1 산소포화도 측정기 청소
- Clean the surface of the oximeter before and after each use with a soft cloth damp의료용 알코올(70% 에탄올 또는 이소프로판올)로 희석하십시오.
- Do not immerse the device in water or other cleaning solutions.
- 재사용하기 전에 기기가 완전히 건조되었는지 확인하십시오.
6.2 배터리 교체
When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.
6.3 보관
Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원을 켠 후 표시되지 않음 | 배터리가 소진되었거나 올바르게 설치되지 않았습니다. | Replace batteries or reinstall them with correct polarity. |
| Display shows '---' or unstable readings | Finger not inserted properly; excessive movement; cold finger; nail polish. | Reinsert finger correctly; remain still; warm the finger; remove nail polish. |
| 기기가 자동으로 꺼집니다. | Normal auto-off function (5 seconds inactivity) or low battery. | This is normal behavior. If unexpected, check battery level. |
| Difficulty opening battery cover | Screw is too tight or cover is stiff. | Use the provided screwdriver. Apply gentle, even pressure to slide the cover after unscrewing. |
8. 사양
- 제품 크기: 2.32 x 1.42 x 1.38 인치
- 품목 무게: 3.52 온스
- Measuring Range SpO2: 70-100%
- Measuring Range Pulse Rate: 0-250 박자
- 배터리 수명: 약 20-30시간
- 전원: AAA 배터리 2개 (포함되지 않음)
- 자동 차단 : 5초 동안 활동이 없으면
- 제조업체: Contec Medical Systems Co.,Ltd
9. 안전 정보
- This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
- Do not use the oximeter during sports activities, as movement can affect accuracy.
- Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
- Avoid exposing the device to direct sunlight, high temperatures, or moisture.
- 기기를 직접 수리하거나 개조하지 마십시오. 문제가 발생하면 고객 지원팀에 문의하십시오.
10. 지원 정보
For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:
- 기술 지원 전화: +86-335-8015431
- 이메일: contecmed@contecmed.com.cn
- Web대지: http://www.contecmed.com
Please refer to the official CONTEC web구체적인 보증 약관 및 조건은 해당 사이트 또는 구매 문서를 참조하세요.