Sanus WSSE12-W2

Sanus Fixed Height Speaker Stands for Sonos Era 100

Model: WSSE12-W2

소개

This manual provides comprehensive instructions for the assembly, installation, and maintenance of your Sanus Fixed Height Speaker Stands, specifically designed for the Sonos Era 100 wireless speaker. Please read all instructions carefully before beginning installation to ensure proper setup and safe operation.

안전 정보

Always follow basic safety precautions when installing and using this product. Keep small parts away from children. Ensure all connections are secure before placing the speaker on the stand. Do not exceed the recommended weight capacity for the speaker stand.

패키지 내용

Verify that all components are present before assembly. If any parts are missing or damaged, contact Sanus customer support.

  • Speaker Stand Post (2)
  • 베이스 플레이트(2)
  • Speaker Platform (2)
  • Mounting Hardware for Sonos Era 100
  • 고무 발 (8)
  • Height-Adjustable Carpet Spikes (8)
  • Assembly Tool (e.g., Phillips screwdriver)

설정 및 설치

Follow these steps to assemble and install your speaker stands.

  1. Attach Base Plate to Stand Post: Securely fasten the base plate to the bottom of the stand post using the provided screws and assembly tool. Ensure the connection is tight and stable.
  2. 바닥 보호재를 설치하세요: Depending on your flooring, attach either the rubber feet for hard surfaces or the height-adjustable carpet spikes for carpeted areas to the underside of the base plate. Adjust spikes as needed for leveling.
  3. Route Speaker Cable: Before attaching the speaker platform, carefully route the Sonos Era 100 power cable and any other necessary cables through the oversized post of the speaker stand. This integrated cable management system helps maintain a clean and organized appearance.
  4. 스피커 플랫폼 부착: Secure the speaker platform to the top of the stand post using the designated screws.
  5. Mount Sonos Era 100 Speaker: Place your Sonos Era 100 speaker onto the speaker platform. Use the included hardware to securely attach the speaker to the stand, ensuring it is stable and centered.
Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, showing dimensions of 34.4 inches height, 10 inches width, and 12.7 inches depth.
Image: Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, illustrating overall dimensions and a 5-year limited warranty badge.
Close-up of speaker stand bases showing options for rubber feet and height-adjustable carpet spikes.
Image: Detail of the stand bases, highlighting the inclusion of both rubber feet and height-adjustable carpet spikes for various floor types.

작동 지침

These speaker stands are designed to position your Sonos Era 100 speakers at an optimal listening height for an enhanced audio experience.

  • 놓기: Position the speaker stands in your desired listening area, ensuring they are on a stable, level surface.
  • 최적의 청취 환경: The fixed height of 34.4 inches (87.4 cm) is engineered to provide an ideal acoustic experience for most seating arrangements.
Sanus speaker stand with Sonos Era 100 speaker, emphasizing 'Optimal Listening Height'.
Image: The speaker stand with a Sonos Era 100 speaker, illustrating its optimal listening height.
Close-up of the speaker stand top, showing how it seamlessly integrates with the Sonos Era 100 speaker.
이미지: 클로즈업 view demonstrating the seamless integration of the speaker stand with the Sonos Era 100 speaker.

유지

To ensure the longevity and appearance of your speaker stands, follow these simple maintenance guidelines:

  • 청소: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp 순한 비누를 묻힌 천으로 닦은 후 완전히 말리십시오. 연마성 세제나 용제 사용은 피하십시오.
  • 점검: 모든 나사와 연결부를 주기적으로 점검하여 단단히 고정되어 있는지 확인하세요.

문제 해결

문제가능한 원인해결책
스탠드가 흔들리거나 불안정합니다.연결이 느슨하고 바닥이 고르지 않습니다.Tighten all screws. If on carpet, adjust height-adjustable spikes until stable. If on hard floor, ensure rubber feet are properly installed and the surface is level.
Speaker does not fit securely.Incorrect speaker model; improper mounting.Ensure you are using a Sonos Era 100 speaker. Re-check mounting hardware and instructions to ensure correct attachment.
케이블이 눈에 띄거나 지저분합니다.Cables not routed through the post.Disassemble the top portion of the stand and re-route cables through the integrated cable management channel in the stand post.

명세서

  • 모델 번호: WSSE12-W2
  • 호환성: Sonos Era 100 Wireless Speaker
  • 재료: 합금강
  • 색상: 하얀색
  • 제품 크기(길이 x 너비 x 높이): 12.7" x 10" x 34.4"(32.2cm x 25.4cm x 87.4cm)
  • 품목 무게: 17.11파운드(7.78kg)
  • 최적의 청취 높이: 34.4인치(87.4cm)
  • 케이블 관리 : Integrated through-post design
  • 바닥재 호환성: Includes rubber feet for hard floors and height-adjustable carpet spikes for carpeted surfaces.

보증 정보

Sanus provides a 5년 한정 보증 for these speaker stands. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official Sanus web사이트를 방문하거나 고객 지원팀에 문의하세요.

지원하다

For further assistance, technical support, or to inquire about replacement parts, please visit the official Sanus website or contact their customer service department. You can find contact information on the Sanus web대지: www.sanus.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.