Betta SE 태양열 자동 로봇 수영장 표면 스키머 청소기 사용 설명서

소개

The Betta SE is an advanced solar-powered robotic pool surface skimmer designed to automatically and continuously clean your pool's water surface. It efficiently removes debris such as leaves, dust, pollen, pet hair, and other floating particles, ensuring a pristine pool with minimal effort.

Figure 1: The Betta SE Robotic Pool Skimmer.

주요 특징

• 100% 태양열 발전: Operates automatically and continuously using solar energy.
• Aqua Dynamics Design: Provides continuous cleaning for 30 hours or more on a single charge.
• Swift Recharge Time: Fully recharges in 5-6 hours under direct sunlight while cleaning.
• Twin Salt Chlorine Tolerant (SCT) Motors: Patented motors ensure reliable, energy-efficient operation in both fresh and saltwater pools.
• Large Fine-Mesh Debris Basket: 200 um basket with a top handle for easy emptying.
• UV-Resistant Body & Ultrasonic Radar: Protects the unit from sun damage and helps avoid obstacles.
• 원격 제어: Allows for manual navigation and control.

설정

The Betta SE is designed for ease of use, requiring minimal setup. Ensure the unit is placed in the pool with sufficient water depth.

1. 언박싱: Carefully remove the Betta SE from its packaging.
2. 초기 배치: Place the Betta SE directly onto the surface of your pool water. The unit will begin to charge its internal battery using its solar panel when exposed to sunlight.
3. 수심 요구 사항: Ensure your pool has a minimum water depth of 5 inches for optimal operation. The Betta SE is not suitable for infinity pools.
4. 전원 켜기: Locate the power switch on the unit and turn it to the 'ON' position. The skimmer will automatically begin its cleaning cycle.

Figure 2: The Betta SE is 100% solar powered and cordless.

작동 지침

The Betta SE operates autonomously, continuously cleaning the pool surface. Its intelligent design allows it to navigate and collect debris effectively.

• 연속 청소: The skimmer will operate continuously, day and night, for up to 30 hours on a full charge. It recharges itself when exposed to direct sunlight.
• 스마트 내비게이션: Equipped with ultrasonic radar sensors and four water-depth bumper rods, the Betta SE detects and avoids obstacles, ensuring comprehensive cleaning without getting stuck.
• 원격 제어: Use the provided remote control for manual steering or to direct the skimmer to specific areas for targeted cleaning.

Figure 3: The Betta SE automatically cleans various floating debris.

Figure 4: Ultrasonic radar sensors help the Betta SE detect and avoid obstacles.

유지

Regular maintenance ensures the longevity and optimal performance of your Betta SE.

1. Emptying the Debris Basket: The large fine-mesh (200 um) debris basket should be emptied regularly, depending on the amount of debris in your pool. Simply dock the unit, open the cover, and lift out the basket using its top handle. Empty the collected debris and rinse the basket with water.
2. 장치 청소: Periodically wipe down the exterior of the Betta SE with a soft, damp cloth to remove any residue. The UV-resistant coating helps protect the unit from sun damage.
3. 프로펠러 검사: Occasionally check the twin Salt Chlorine Tolerant (SCT) motors and propellers for any tangled debris or obstructions. Clear any blockages to ensure smooth operation.

Figure 5: The large debris basket is easy to access and clean.

문제 해결

Here are solutions to common issues you might encounter with your Betta SE:

• Short Run Time in Fall/Winter: During fall and winter months, reduced run time is typically due to insufficient direct sunlight on the solar panel. To resolve this, remove the Betta SE from the pool and position the solar panel directly toward the sun. Keep the switch in the ON position to allow for optimal charging.
• Getting Stuck at the Skimmer: If the Betta SE frequently gets stuck near your pool's built-in skimmer, try reducing or turning off the pool skimmer suction.

Figure 6: Solution for short run time in low sunlight conditions.

명세서

보증 및 지원

The Betta SE comes with a 1년 보증 from the date of purchase. For warranty claims, technical support, or any inquiries regarding your product, please refer to the contact information provided in your product packaging or visit the official Betta web대지.

Always ensure to follow the instructions in this manual to maintain your warranty and ensure safe operation.