X Rocker Orbit 2

X Rocker Orbit 2.0 RGB Neo 모션 플로어 로커 사용 설명서

소개

This manual provides essential instructions for the safe and effective use of your X Rocker Orbit 2.0 RGB Neo Motion Floor Rocker. Please read this manual thoroughly before assembly and operation, and retain it for future reference.

X Rocker Orbit 2.0 RGB Neo Motion Floor Rocker

Image: The X Rocker Orbit 2.0 RGB Neo Motion Floor Rocker, featuring a black padded seat with integrated RGB LED lighting strips along the sides, designed for floor-level gaming and relaxation.

안전 정보

부상이나 제품 손상을 방지하려면 다음 안전 지침을 준수하세요.

  • This product may have a maximum weight capacity of 120 kg (265 lbs). Do not exceed this limit to ensure safe and proper use.
  • 모든 포장재는 어린이의 손이 닿지 않는 곳에 보관하십시오.
  • 사용하기 전에 모든 연결이 안전한지 확인하십시오.
  • 제품을 극한의 온도나 습기에 노출시키지 마십시오.
  • Avoid placing sharp objects on the chair.
  • Use only the provided or recommended power adapters for charging.

패키지 내용

패키지를 열 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.

  • X Rocker Orbit 2.0 RGB Neo Motion Floor Rocker
  • USB 충전 케이블
  • Audio Connection Cable (if applicable)
  • 사용 설명서 (본 문서)

품목이 누락되었거나 손상된 경우 고객 지원팀에 문의하세요.

설정

1. 초기 배치

Place the X Rocker Orbit 2.0 on a flat, stable surface. Ensure there is enough space around the chair for comfortable use and to prevent obstruction of the LED lighting.

2. 내장 배터리 충전

The chair features a built-in rechargeable battery for the Neo Motion LED lighting. Before first use, fully charge the battery.

  1. Locate the USB charging port on the chair, typically found near the control panel.
  2. Connect the provided USB charging cable to the chair's USB port.
  3. Connect the other end of the USB cable to a compatible USB wall adapter (not included) or a power bank (not included).
  4. Allow the chair to charge until the charging indicator light (if present) signals a full charge. A full charge can provide up to 2 hours of LED operation.

Note: The chair can be used while charging, but for optimal battery life, it is recommended to fully charge before initial use.

3. Audio Connection (if applicable)

If your model includes audio features, connect it to your audio source:

  • 유선 연결: Use the provided audio cable to connect the chair's audio input port to the audio output of your gaming console, TV, or other device.
  • 무선 연결(블루투스): Refer to the operating section for Bluetooth pairing instructions if your model supports it.

작동 지침

1. 전원 켜기 / 끄기

Locate the power button on the control panel. Press and hold for a few seconds to turn the chair's LED lighting and audio (if applicable) on or off.

2. Neo Motion LED Lighting Control

The X Rocker Orbit 2.0 features Neo Motion LED technology with multiple lighting effects.

  • 모드 버튼: Press the 'Mode' button (or similar) on the control panel to cycle through the available lighting effects and color options. There are up to 30 different light effects and color options across the full RGB spectrum.
  • 밝기 조절: If available, use dedicated buttons to adjust the brightness of the LED lights.

3. Audio Control (if applicable)

If your chair has integrated audio, use the control panel to manage sound:

  • 볼륨 조절: Adjust the master volume using the dedicated volume dial or buttons.
  • 블루투스 페어링 : If your model supports Bluetooth, activate Bluetooth on your device and on the chair (usually by pressing a 'Bluetooth' button or holding the power button). Select "X Rocker Orbit" (or similar) from your device's Bluetooth list to pair.

유지

Proper maintenance ensures the longevity and performance of your X Rocker Orbit 2.0.

  • 청소: 부드러운 천으로 의자 표면을 닦으세요.amp 깨끗한 천으로 닦아주세요. 잘 지워지지 않는 얼룩은 순한 비눗물에 적신 후 깨끗한 천으로 닦아내세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
  • 저장: When not in use, store the chair in a cool, dry place away from direct sunlight.
  • 배터리 관리 : To maintain battery health, avoid completely draining the battery frequently. Recharge when the LED lights dim or turn off.
  • 케이블 관리 : Ensure all cables are neatly arranged and not pinched or tangled to prevent damage.

문제 해결

문제가능한 원인해결책
LED 조명이 켜지지 않습니다.배터리가 소진되었습니다.Connect the chair to a power source using the USB charging cable and allow it to charge.
LED 조명은 어둡습니다.배터리 잔량이 부족합니다.Recharge the chair's battery.
No audio (if applicable).Incorrect audio connection or low volume.Check all audio cables are securely connected. Ensure the volume on both the chair and the audio source is turned up. If using Bluetooth, re-pair the device.
의자가 부드럽게 흔들리지 않습니다.고르지 않은 표면 또는 장애물.Ensure the chair is on a flat, level surface. Check for any objects underneath the chair that might impede rocking motion.

명세서

  • 모델: 궤도 2
  • 제품 유형: RGB Neo Motion Floor Rocker
  • LED 기술: Neo Motion RGB (up to 30 effects)
  • 전원: Rechargeable USB (internal battery)
  • Battery Life (LED): 최대 2시간(대략)
  • 최대 중량 용량: 120kg(265파운드)
  • 패키지 크기: 74 x 68 x 42cm
  • 품목 무게: 9.6kg
  • ASIN: B0BVMNW77P

보증 및 지원

For warranty information, technical support, or to purchase replacement parts, please visit the official X Rocker web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

Web대지: www.xrockeruk.com (전amp르, 실제 URL may vary by region)

© 2023 X Rocker. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.