Stayer 36V L20 Cordless Brush Cutter

1. 서론

This manual provides essential information for the safe and effective use of your Stayer 36V L20 Cordless Brush Cutter. Please read these instructions carefully before operating the tool to ensure proper assembly, operation, and maintenance. Keep this manual for future reference.

일반 안전 경고

• 항상 눈 보호구, 귀 보호구, 장갑, 튼튼한 신발을 포함한 적절한 개인 보호 장비(PPE)를 착용하십시오.
• 작업 구역에 구경꾼, 어린이, 애완동물이 없는지 확인하십시오.
• Inspect the tool for any damage or loose parts before each use. Do not operate a damaged tool.
• 사용하지 않을 때, 청소하기 전 또는 유지 보수를 할 때는 배터리 팩을 분리하십시오.
• Do not operate the brush cutter in wet conditions or in the presence of flammable liquids or gases.

2. 제품 오버view

The Stayer 36V L20 is a powerful cordless brush cutter designed for trimming grass, weeds, and light brush. It features a brushless motor for efficiency and durability, powered by two 18V Li-ion batteries for a total of 36V.

Figure 1: Stayer 36V L20 Cordless Brush Cutter. Key components include the dual battery insertion point, safety switch, 180° rotatable double handle, adjustable head, and support harness.

주요 특징:

• 듀얼 배터리 시스템: Utilizes two 18V batteries for a combined 36V power output, ensuring extended runtime and consistent performance.
• 브러시리스 모터 : Provides increased efficiency, longer motor life, and reduced maintenance.
• Nylon Line and Disc Cutting: Equipped for both nylon line trimming and disc cutting for versatile use on various types of vegetation.
• 2-Second Reverse Rotation: A quick reverse spin system helps clear tangled grass and debris from the cutting mechanism.
• Electronic Speed Regulator: Allows adjustment of cutting speed to match the task at hand.
• Lightweight Aluminum Structure: Ensures maximum lightness and durability of the tool.
• 이중 안전 스위치: Prevents unintentional activation and enhances user safety.
• Automatic Nylon Line Feed: Simplifies line management during operation.
• 180° Rotatable Double Handle: Ergonomic design for comfortable use and adaptability to different working positions.
• Support Harness: Distributes tool weight for comfortable handling during prolonged use.
• STAYER Li-ion HIGH-TECH Battery: Features protection against overcharge, discharge, overheating, and short circuits, with an LED charge indicator.
• LED 작업 공간 조명: 절단 영역을 밝게 비추어 가시성을 향상시킵니다.

3. 설정

3.1. 배터리 충전

1. 충전기를 적합한 전원 콘센트에 연결하십시오.
2. Insert the Stayer 18V Li-ion batteries into the charger. Ensure they are seated correctly.
3. Allow the batteries to charge fully. The LED indicator on the charger will show the charging status.
4. 배터리가 완전히 충전되면 충전기에서 분리하십시오.

3.2. Tool Assembly

While the main unit comes largely pre-assembled, some components may require attachment.

• 핸들 부착: Secure the double handle to the main shaft using the provided fasteners. Ensure it is positioned comfortably for your height and working style.
• 경비원 설치: Attach the protective guard over the cutting head. This guard is crucial for user safety and must always be in place during operation.
• 하네스 연결: Attach the support harness to the designated point on the brush cutter shaft. Adjust the harness for a comfortable and balanced fit, distributing the tool's weight evenly.

3.3. 배터리 삽입

1. Ensure the brush cutter is switched off and the safety switch is engaged.
2. Insert two fully charged 18V Li-ion batteries into the dual battery slots on the tool. Push firmly until they click into place.
3. Verify that the batteries are securely seated before use.

4. 사용 설명서

4.1. 공구 시작 및 정지

1. 모든 안전 수칙을 준수하고 개인 보호 장비를 착용하십시오.
2. To start, engage the double safety switch and then press the trigger. The tool will begin operating.
3. To stop, release the trigger. The cutting head will cease rotation.

4.2. 속도 제어

Use the electronic speed regulator to adjust the cutting speed. Lower speeds are suitable for light trimming, while higher speeds are for denser vegetation.

4.3. 절단 기술

• Nylon Line Trimming: Hold the brush cutter at a slight angle to the ground. Use a sweeping motion to cut grass and light weeds. The automatic line feed system will advance the line as needed.
• Disc Cutting: For thicker brush and small saplings, use the cutting disc. Approach the material slowly and maintain a firm grip. Avoid hitting hard objects like rocks or metal.
• 역회전: If the cutting head becomes clogged with grass or debris, activate the 2-second reverse rotation system to clear it. Refer to the tool's specific controls for this function.

4.4. Using the Support Harness

Adjust the harness so the tool is balanced and comfortable. This reduces fatigue during extended use and allows for better control.

5. 유지관리

Regular maintenance ensures the longevity and safe operation of your brush cutter. Always remove the batteries before performing any maintenance.

5.1. 청소

• After each use, clean the cutting head, guard, and motor housing to remove grass, dirt, and debris.
• Use a dry cloth or soft brush. Do not use water or cleaning solvents that could damage the tool.
• 과열을 방지하기 위해 환기구에 장애물이 없는지 확인하십시오.

5.2. Nylon Line Replacement

When the nylon line becomes too short or breaks, replace it according to the instructions provided with the cutting head or refer to the manufacturer's guidelines. Use only recommended line types and diameters.

5.3. 배터리 관리 및 보관

• 배터리는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 완전히 방전된 배터리를 장기간 보관하지 마십시오. 사용하지 않을 때는 주기적으로 충전하십시오.
• Do not expose batteries to water or impact.

5.4. Tool Storage

Store the brush cutter in a secure, dry place, out of reach of children. Ensure the batteries are removed before storage.

6. 문제 해결

This section addresses common issues you might encounter with your Stayer 36V L20 Brush Cutter.

7. 사양

Technical data for the Stayer 36V L20 Cordless Brush Cutter (Model 1.2824).