1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your FORGING MOUNT Single Monitor Arm Stand, Model FM4545. This gas spring desk mount is designed to enhance your workspace ergonomics and free up valuable desk space. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.
2. 안전 정보
- 설치하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 불량인 경우 사용하지 마십시오.
- Verify that your monitor's weight and VESA pattern are within the specified limits of this mount. This mount supports monitors from 17" to 42" and up to 33 lbs (15 kg), with VESA patterns of 75x75mm or 100x100mm.
- Install the monitor arm on a sturdy desk surface that can support the combined weight of the mount and your monitor.
- Adjust the gas spring tension carefully according to your monitor's weight to prevent sudden movements.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
- 나사를 너무 세게 조이지 마세요. 손상될 수 있습니다.
- 설치 과정에 대해 궁금한 점이 있으면 자격을 갖춘 전문가에게 문의하십시오.
3. 패키지 내용
Please check the package to ensure all parts are included:
- 모니터 암 어셈블리
- 데스크 Clamp 베이스
- 그로밋 마운트 베이스
- VESA 플레이트
- 하드웨어 키트(나사, 와셔, 스페이서)
- Hex Keys / Tools
- 사용 설명서(본 문서)
이미지: 이상view of the monitor arm stand and its primary components, including both clamp 및 그로밋 장착 옵션.
4. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | FM4545 |
| 호환 모니터 크기 | 17인치에서 42인치까지 |
| 중량 용량 | 4.4 - 33파운드(2 - 15kg) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 장착 유형 | C-Clamp 또는 그로밋 마운트 |
| 책상 두께(C-Cl)amp) | 최대 3.35인치(85mm) |
| 책상 두께(그로밋) | 0.39" - 2.75" (10-70mm) |
| 그로밋 구멍 직경 | 0.39" - 2.36" (10-60mm) |
| 수평 확장 | 최대 21.81인치(554mm) |
| 수직 높이 조정 | 최대 16.45인치(418mm) |
| 기울기 범위 | -45° ~ +90° |
| 스위블 범위 | ±180° |
| 회전 | 360° |
| 재료 | 금속 |
Image: Compatibility details for monitor size, weight, and VESA patterns.
5. 설정 및 설치
모니터 암은 C-Cl 두 가지 설치 방식을 제공합니다.amp and Grommet Mount. Choose the method that best suits your desk.
5.1 설치 방법 선택
이미지: 상세 view of C-Clamp and Grommet mounting options and their respective desk thickness requirements.
5.2 VESA 플레이트를 모니터에 부착하기
- 모니터에 흠집이 생기지 않도록 부드럽고 깨끗한 표면에 모니터 화면이 아래로 향하게 조심스럽게 놓으십시오.
- VESA 플레이트를 모니터 뒷면의 장착 구멍에 맞춰 정렬하십시오.
- Secure the VESA plate using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are tightened securely but do not overtighten.
5.3 Attaching the Monitor to the Arm (Quick Release)
The monitor arm features a quick-release mechanism for easy attachment and detachment of your monitor.
- With the VESA plate attached to your monitor, slide the monitor (with VESA plate) onto the arm's mounting head.
- Ensure the VESA plate clicks securely into place. A locking lever or screw will typically be present to further secure it.
Image: Quick release mechanism for monitor attachment.
6. 운영 및 조정
설치가 완료되면 모니터를 최적의 상태로 조정할 수 있습니다. view편안함과 생산성을 제공합니다.
6.1 가스 스프링 장력 조정
The gas spring allows for smooth and effortless height adjustment. You must adjust the tension to match your monitor's weight.
- Keep the arm in a horizontal position during adjustment.
- Use the provided hex key to turn the adjustment screw located on the arm.
- 회전하다 시계 방향으로 ("+" direction) to 긴장을 높이다 for heavier monitors (arm falls down).
- 회전하다 반 시계 방향 ("-" direction) to 긴장을 완화하다 for lighter monitors (arm raises up).
- Adjust until the monitor stays at the desired height without drifting up or down.
Image: Gas spring tension adjustment instructions.
6.2 Monitor Movement
The arm provides extensive flexibility for positioning your monitor:
- 경사: Adjust the screen angle from -45° to +90° to reduce glare and optimize view주고받음.
- 받침: 모니터를 수평으로 ±180° 회전하여 화면을 공유하거나 변경하세요. view각도를 나타냅니다.
- 회전: 모니터를 가로 모드에서 세로 모드로 360° 회전합니다.
- 높이 조정: Move the monitor vertically up to 16.45 inches (418mm).
- 확대: Extend the monitor horizontally up to 21.81 inches (554mm) from the mounting pole.
Image: Full range of motion for the monitor arm.
7. 케이블 관리
The monitor arm includes integrated cable management channels to keep your workspace tidy and organized. Route your display and power cables along the arm and through the designated clips or covers to conceal them.
Image: Cable management system on the monitor arm.
8. 유지관리
- 모든 나사와 연결부가 단단히 조여져 있고 안전한지 정기적으로 점검하십시오.
- 모니터 암을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- Do not lubricate the gas spring mechanism. It is designed to be maintenance-free.
9. 문제 해결
9.1 Monitor Drifts Down or Up
해결책: Adjust the gas spring tension. If the monitor drifts down, increase tension by turning the adjustment screw clockwise. If it drifts up, decrease tension by turning counter-clockwise. Refer to Section 6.1 for detailed instructions.
9.2 Monitor Arm is Wobbly
해결책:
- 책상이 깨끗한지 확인하세요amp or grommet mount is securely tightened to the desk.
- Check that the VESA plate is firmly attached to both the monitor and the arm.
- Verify that your desk surface is stable and not flexing under the weight.
9.3 Difficulty Moving the Arm
해결책: The arm's joints may be too tight. Loosen the corresponding screws slightly with the hex key until movement is smooth but still holds position. Do not loosen excessively.
10. 보증 및 지원
FORGING MOUNT products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official FORGING MOUNT website. Please have your model number (FM4545) and purchase information ready when contacting support.
