소개
These DBPOWER Smart Jump Starter Clamps are designed as a replacement or upgrade for compatible DBPOWER 12V car jump starters. They feature an integrated LCD screen for real-time voltage display and incorporate multiple protection systems to ensure safe and reliable operation during vehicle jump-starting.
Safety Information and Protection Systems
The intelligent jumper clamps are equipped with 8 protection systems to prevent common misoperations and ensure user safety. Always follow these guidelines when using the clamps.
영상: This diagram illustrates the eight built-in protection systems: Surge Voltage Protection, Overcurrent Protection, Reverse Polarity Protection, High Temperature Protection, High Voltage Protection, Short Circuit Protection, Over Discharge Protection, and Reverse Connection Protection. These features safeguard both the user and the vehicle's battery.
- 서지 볼륨tage 보호: Prevents damage from sudden voltag전자 스파이크.
- 과전류 보호: Guards against excessive current flow.
- 역 극성 보호 : 만약 문제가 발생하면 경고를 보내고 작동을 방지합니다.amps are connected incorrectly to battery terminals.
- 고온 보호: Shuts down operation if the unit overheats.
- 높은 Voltage 보호: Protects against overvoltag조건.
- 단락 보호: 우발적인 단락으로 인한 손상을 방지합니다.
- 과방전 보호: Protects the jump starter battery from being excessively drained.
- 역접속 보호: Ensures correct connection to the vehicle battery.
제품 특징
- LCD 화면: 실시간 배터리 용량을 표시합니다tage, eliminating the need for a separate voltmeter.
- 내구성 있는 소재: Constructed with high-quality ABS material and full copper cables for stable and insulated performance.
- 강화된 안전성: Upgraded design for improved protection and reliability compared to older models.
영상: This image highlights the upgraded material design and the integrated LCD display of the DBPOWER Smart Jumper Clamp, contrasting it with a generic clamp lacking these features.
영상: 자세한 view of the DBPOWER Smart Jumper Clamps, emphasizing the LCD display and the robust construction designed for reverse polarity and short-circuit protection.
호환성
These smart jumper clamps are specifically designed to be compatible with the following DBPOWER 12V car jump starter models:
- DBPOWER DJS80
- DBPOWER G15
- DBPOWER G16
영상: This image shows the DBPOWER Smart Jumper Clamps connected to different compatible DBPOWER jump starter units, including models DJS80, G15, and G16, demonstrating their intended use.
작동 지침
Steps to Jump Start Your Car
- Connect to the Jump Starter: Insert the blue plug of the smart clamps into the corresponding port on your DBPOWER jump starter. Ensure a secure connection.
- 연결 Clamp자동차 배터리로: 빨간색 양극(+) 단자를 연결하세요.amp to the positive (+) terminal of the car battery. Attach the black negative (-) clamp to the negative (-) terminal of the car battery. The LCD screen on the clamps will display the battery voltage.
- Start the Car Engine: 일단 clamps are correctly connected and the jump starter is ready (refer to your jump starter's manual for specific indicators), start your car's engine.
- Cl 제거amps: After the car engine starts, immediately remove the clamps from the car battery, first the black negative (-) clamp, then the red positive (+) clamp. Disconnect the clamp점프 스타터에서 왔습니다.
영상: This visual guide demonstrates the four steps for jump starting a car: 1. Connect the clamps to the jump starter. 2. Connect the clamps to the car battery. 3. Start the car engine. 4. Remove the clamps.
LCD Display Indicators and Troubleshooting
The integrated LCD screen provides important feedback during operation. Observe the display for status and error messages.
영상: This image displays the LCD screen of the smart clamps, showing various indicators such as current voltage (e.g., 13.0V), and error codes like LV (Low Voltage), HV (High Voltage), RC (Reverse Charge), SC (Short Circuit), HT (High Temperature), and Overload. These indicators assist in diagnosing issues during jump-starting.
| 지시자 | 의미 | 행동 |
|---|---|---|
| 권tage Display (e.g., 12.0V) | 현재 볼륨tag전자 차량 배터리. | Proceed with jump start if voltage is low but within acceptable range for jump starting. |
| LV (Low Voltage) | 차량 배터리 voltage가 너무 낮습니다. | Ensure jump starter is fully charged. Check battery connections. |
| HV(높은 볼륨tage) | 차량 배터리 voltage가 너무 높아요. | Do not attempt to jump start. Consult a mechanic. |
| RC (Reverse Charge) | Indicates reverse charging or incorrect connection. | 확인 CLamp connections to battery terminals. Ensure red is to positive (+), black to negative (-). |
| SC (Short Circuit) | A short circuit has been detected. | 즉시 연결을 끊으십시오amps. Inspect cables and terminals for damage or improper contact. |
| HT (High Temperature) | 더 클amps or jump starter are overheating. | Disconnect and allow the unit to cool down before attempting further use. |
| 초과 적재 | Excessive current draw detected. | Ensure the vehicle's electrical system is not drawing too much power. Consult vehicle manual. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | F15A |
| 권tage | 12 볼트 |
| 품목 무게 | 231g |
| 재료 | High-quality ABS, Copper |
| 한국어: | 840164806472 |
| Compatible Jump Starters | DBPOWER DJS80, G15, G16 |
유지 관리 및 보관
- 클을 유지amps clean and dry. Wipe off any dirt, oil, or battery acid residue after each use.
- 케이블과 연결부를 점검하세요amps regularly for any signs of damage, fraying, or corrosion. Do not use if damaged.
- CL을 저장amps in a cool, dry place, away from direct sunlight and extreme temperatures.
- CL을 확인amps are disconnected from the jump starter and vehicle battery when not in use.
고객 지원
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your original DBPOWER jump starter unit or visit the official DBPOWER web대지.