1. 서론
This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.
그림 1: 전면 view of the Barska AX13744 Biometric Safe.
2. 안전 정보
- Always keep emergency keys in a secure location away from the safe. Do not store them inside the safe.
- 무단 제거를 방지하기 위해 금고가 단단히 고정되어 있는지 확인하십시오.
- Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
- Regularly check battery levels to ensure proper function of the electronic lock.
- 금고를 사용하지 않을 때는 문을 닫고 잠그십시오.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- Barska AX13744 Safe Unit
- 2 Adjustable Shelves with Shelf Brackets
- 4개의 AA 배터리
- Mounting Hardware (bolts, anchors)
- Set of Emergency Back-Up Keys (2 keys)
그림 2: 포함된 구성 요소 및 제품 크기.
4. 설정
4.1. 배터리 설치
- 금고 문 안쪽에서 배터리 보관함을 찾으세요.
- Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
- 배터리 덮개를 단단히 닫으세요.
4.2. Initial Access and Opening
Upon first use, open the safe using the emergency keys:
- Locate the keyhole cover on the electronic keypad.
- 덮개를 제거하면 열쇠 구멍이 나타납니다.
- Insert one of the emergency keys and turn it clockwise while simultaneously turning the handle to open the safe door.
- Once open, you can proceed with programming fingerprints and PIN codes.
4.3. 금고 설치
The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.
- Choose a suitable location for the safe, ensuring a stable surface.
- Mark the pre-drilled mounting points on the floor through the safe's base.
- Drill pilot holes into the floor at the marked locations.
- Position the safe over the holes and secure it using the provided bolts and anchors.
- 금고가 단단히 고정되어 흔들리지 않는지 확인하십시오.
그림 3: 내부 view of the safe with adjustable shelves.
5. 사용 설명서
5.1. Biometric Fingerprint Access
The safe can store up to 160 distinct fingerprints.
- To program a fingerprint, press the programming button located inside the safe.
- Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
- Repeat the scan multiple times for better accuracy.
- To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.
5.2. Keypad PIN Code Access
The safe supports up to 2 unique PIN codes.
- To program a PIN code, press the programming button inside the safe.
- Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
- Repeat the process to confirm the PIN code.
- To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.
5.3. Emergency Key Access
In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.
Figure 4: Emergency access using a 9V battery (not included).
5.4. 알람 시스템
- Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
- 잠금 모드: The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
- Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.
5.5. 내부 LED 조명
The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.
5.6. 조절 가능한 선반
The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.
비디오 1: 짧은 사전view demonstrating the advanced security features of the Barska safe, including biometric and keypad access.
6. 유지관리
- 청소: 금고 외부를 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 배터리 교체: Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
- 잠금 장치: Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Safe does not open with fingerprint/PIN. | Low batteries, incorrect fingerprint/PIN, lockout mode activated. | Replace batteries. Re-enter correct fingerprint/PIN. Use emergency key. Wait for lockout mode to reset. |
| 키패드가 응답하지 않습니다. | 배터리가 방전되었습니다. | Use emergency 9V battery for temporary power (see Figure 4) or emergency keys. Replace internal AA batteries. |
| 예상치 못하게 경보가 울립니다. | Motion sensor triggered, tamp시도를 하고 있습니다. | Ensure safe is stable. Check for signs of tampering. Deactivate motion sensor if not needed. |
| 문이 제대로 닫히지 않습니다. | Obstruction, misaligned bolts. | Check for items blocking the door or bolts. Ensure safe is on a level surface. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 바르스카 |
| 모델 번호 | AX13744 |
| 용량 | 2.02입방 피트 |
| Product Dimensions (Outer) | 13.78인치 깊이 x 26인치 너비 x 16.93인치 높이 |
| 잠금 유형 | 생체 인식, 전자 조합 잠금 장치, 열쇠 |
| 재료 | 합금강 |
| 내화성 | 30°F에서 1400분 |
| 장착 유형 | 플로어 마운트 |
| 특별 기능 | Alarm System, Anti-Theft, Combination Lock, Fire Resistant, Sensor Light |
| 전원 | AA 배터리 4개(포함) |
| 품목 무게 | 112.3파운드 |
Figure 5: Fire resistance features of the safe.
9. 보증 및 지원
보증 정보는 제조사 공식 웹사이트를 참조하십시오. website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their web대지.
자주 묻는 질문:
- Are replacement parts or accessories available for this product if needed? 저희를 방문해주세요 website to request keys or replacement parts.