JIARUIXIN CSR-12T-1B 12V 2.4G Bluetooth Remote Control and Receiver Kit Instruction Manual

1. 서론

This manual provides instructions for the installation, operation, and maintenance of the JIARUIXIN CSR-12T-1B 12V 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for children's electric riding cars, enabling remote control functionality.

1.1. 제품 호환성

To ensure compatibility, open your electric ride-on car and visually inspect the existing control box. If the appearance of the control box matches the CSR-12T-1B model shown in this manual, this replacement part should be compatible with your vehicle. Pay close attention to the connectors to ensure they match your car's wiring harness.

그림 1: 상단 view of the CSR-12T-1B 12V Control Box. This image displays the main control unit with its identification label, operating voltage (DC12V), and maximum working current (25A MAX).

그림 2: 각도 view of the CSR-12T-1B 12V Control Box. This perspective highlights the various connectors for wiring into the electric riding car's system.

1.2. 패키지 내용

패키지에는 일반적으로 다음이 포함됩니다.

• 1 x CSR-12T-1B 12V Control Box
• 1 x 2.4G Bluetooth Remote Control

2. 설정 및 설치

Installation of the control box requires basic electrical knowledge and careful attention to wiring. If you are unsure, consult a qualified technician.

2.1. 제어 박스 설치

1. 안전이 최우선입니다. Disconnect the battery from the electric riding car before beginning any installation.
2. 기존 제어 박스를 찾으십시오: Open the body of the electric riding car to access the existing control box.
3. 배선 분리: Carefully disconnect all wiring harnesses from the old control box. Note the position of each connector if possible, or take photos for reference.
4. Remove Old Control Box: Unmount the old control box from its position.
5. 새 제어 박스 설치: Mount the new CSR-12T-1B control box in the same location.
6. 배선 연결: Reconnect all wiring harnesses to the new control box. Ensure all connections are secure and match the original configuration.
7. 배터리를 다시 연결하십시오: Once all connections are secure, reconnect the car's battery.

2.2. Remote Control Pairing (Frequency Matching)

The remote control must be paired with the receiver kit for the first use or after replacing the remote control's batteries.

1. 자동차 전원 켜기: Turn on the electric riding car.
2. 페어링 시작: Press and hold the "M" button (or similar pairing button, if present) on the remote control for approximately 3-5 seconds. The indicator light on the remote control should start flashing.
3. Observe Car: The car's lights or other indicators may flash or make a sound to confirm successful pairing.
4. 테스트 기능: Release the button and test the remote control's functions (forward, backward, turning) to ensure it is paired correctly.

3. 사용 설명서

The 2.4G Bluetooth remote control allows parents to safely operate the electric riding car. Familiarize yourself with the button functions:

Figure 3: JIARUIXIN 2.4G Bluetooth Remote Control. This image shows the remote control with all its buttons clearly labeled for their respective functions.

• 앞으로 버튼: Moves the car forward.
• 뒤로가기 버튼: Moves the car backward.
• 좌회전 버튼: Steers the car to the left.
• 오른쪽 방향 버튼: Steers the car to the right.
• Speed Selection Button (S): Adjusts the speed of the car (e.g., low, medium, high). Press to cycle through available speeds.
• Emergency Braking Button (P): Immediately stops the car. Pressing this button will override other commands and bring the car to a halt.

그림 4: 상단 view of the JIARUIXIN 2.4G Bluetooth Remote Control. This image provides a clear view of the remote's ergonomic design and button layout.

4. 유지관리

Proper maintenance ensures the longevity and reliable operation of your control kit.

• 청소: Wipe the control box and remote control with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• 저장: Store the components in a dry place, away from direct sunlight and extreme temperatures.
• 배터리 교체(리모컨): If the remote control's range decreases or it becomes unresponsive, replace its batteries. Refer to the remote control's battery compartment for the correct battery type and orientation.
• 배선 검사: Periodically check all wiring connections to the control box for any signs of wear, corrosion, or looseness. Ensure they are securely fastened.

5. 문제 해결

If you encounter issues with your CSR-12T-1B kit, refer to the following common troubleshooting steps:

• 리모콘이 응답하지 않음:
  • Ensure the electric riding car is powered on.
  • 리모컨의 배터리를 확인하고 필요하면 교체하세요.
  • Perform the remote control pairing (frequency matching) procedure again as described in Section 2.2.
  • Ensure there are no obstructions or strong interference sources between the remote control and the car.
• 차가 움직이지 않음:
  • Verify the car's main power switch is ON.
  • Check the car's battery charge level.
  • Ensure all wiring connections to the control box are secure.
  • Confirm the remote control is paired correctly.
• 간헐적 작동:
  • 느슨한 전선 연결을 확인하세요.
  • Ensure the remote control batteries are not low.
  • Avoid operating near other 2.4Ghz devices that might cause interference.

위 단계를 따른 후에도 문제가 지속되면 고객 지원팀에 문의하십시오.

6. 사양

7. 보증 및 지원

Specific warranty information for this product is not provided in the available documentation. For warranty claims or technical support, please contact the seller or manufacturer directly through the platform where the product was purchased.

Manufacturer: JIARUIXIN