1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your Weiser Tavaris x Breton Front Door Lock and Handle Set. This handleset is designed for exterior doors, offering both keyed entry and enhanced security. It features a sleek, modern design with a Satin Nickel finish, complementing various home aesthetics.
The handleset includes a matching deadbolt with a 1-inch throw for robust security. It can be locked or unlocked using a key from the outside or a key/turnpiece from the inside. The product is ANSI/BHMA Grade 2 Certified, ensuring durability and performance.
Image 1.1: Weiser Tavaris x Breton Handleset, showcasing the exterior handle and deadbolt in Satin Nickel finish.
2. 패키지 내용
설치를 시작하기 전에 패키지에 모든 구성 요소가 포함되어 있는지 확인하십시오.
- 외부 도어 핸들
- 내부 레버
- Deadbolt Assembly
- Latches (for both handle and deadbolt)
- Strikes (for both handle and deadbolt)
- Fasteners and Accessories
- 2개의 키
- 스마트키 도구
- 사용 설명서(본 문서)
Image 2.1: All included components of the handleset, including the exterior handle, interior lever, deadbolt, latches, strikes, keys, and SmartKey tool.
3. 설치
The Weiser Tavaris x Breton handleset is designed for easy installation, typically requiring only a screwdriver. The adjustable latch mechanism accommodates all standard door preparations.
3.1 설치 전 확인
- Ensure your door thickness and backset measurements are compatible with the handleset.
- Confirm the door is properly prepared with standard bore holes.
3.2 Step-by-Step Installation Overview
- 데드볼트 래치를 문 가장자리에 설치합니다.
- Install the deadbolt cylinder and thumbturn assembly.
- Install the lower latch (spring latch) into the door edge.
- Attach the exterior handleset to the door.
- 내부 레버 어셈블리를 설치합니다.
- Secure all components with the provided fasteners.
- Install the strike plates on the door frame.
For detailed visual instructions, refer to the full installation guide included in your package or visit the official Weiser support web대지.
Image 3.1: The handleset installed on a door, illustrating the exterior pull handle and deadbolt, and the interior lever and turnpiece.
Image 3.2: This handleset features a fully reversible design, allowing installation on both left-handed and right-handed doors.
4. 운영
4.1 잠금 및 잠금 해제
- 외부에서: Insert the key into the deadbolt cylinder and turn to lock or unlock.
- 인테리어에서: Use the turnpiece on the deadbolt to lock or unlock.
- The lower handle operates a spring latch and does not provide security locking.
4.2 SmartKey Security Technology
Your Weiser handleset is equipped with SmartKey Security, a re-key technology that allows you to re-key your lock yourself in seconds. This feature protects against advanced break-in techniques and provides convenience by allowing you to match your lock to an existing key.
Re-keying Instructions:
- 작동하는 키를 실린더에 넣고 시계 방향으로 90도 돌리십시오.
- Insert the SmartKey tool fully and firmly into the SmartKey hole. Remove the SmartKey tool.
- 작동하는 키를 제거하세요.
- Insert your new key fully and firmly into the cylinder. Turn the new key 180 degrees counter-clockwise.
- 자물쇠의 키가 새로 제작되었습니다. 새 키가 제대로 작동하는지 테스트해 보세요.
Image 4.1: Diagram illustrating the SmartKey re-keying process and highlighting security features such as kick-in, bump, pick, drill, and saw resistance.
5. 유지관리
To ensure the longevity and smooth operation of your Weiser handleset, follow these maintenance guidelines:
- 청소: 핸들셋은 부드러운 천으로 청소하세요.amp 천으로 닦으세요. 연마성 세제, 용제 또는 강한 화학 물질은 마감재를 손상시킬 수 있으므로 피하세요.
- 매끄럽게 하기: Periodically apply a silicone-based lubricant to the latch and deadbolt mechanisms to maintain smooth operation. Do not use oil-based lubricants.
- 패스너: Periodically check all mounting screws and fasteners to ensure they are tight. Do not overtighten.
6. 문제 해결
If you encounter issues with your handleset, refer to the following common troubleshooting tips:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Key does not turn smoothly or is difficult to insert. | Dirt or debris in the cylinder; worn key; improper re-keying. | Clean the cylinder with compressed air. Try a new key. Re-key the lock following SmartKey instructions. |
| 데드볼트가 완전히 확장되거나 수축되지 않습니다. | Misalignment of strike plate; obstruction in door frame; loose fasteners. | Check strike plate alignment and adjust if necessary. Clear any obstructions. Tighten all fasteners. |
| Interior lever is loose or wobbly. | 장착 나사가 느슨합니다. | Tighten the screws securing the interior lever assembly. |
If the issue persists after attempting these solutions, please contact Weiser Customer Support.
7. 사양
- 재료: Metal or alloy
- 색상: 새틴 니켈
- 스타일: Tavaris x Breton
- 제품 크기: 45.5L x 6.7W 센티미터
- 품목 무게: 3.9 파운드
- 외부 마감 : 새틴 니켈(브러시드)
- 핸들 유형: 핸들 잡아 당기기
- 특정 용도: 외부문
- 잠금 유형: 키 잠금
- 손의 방향: Ambidextrous (Universal Handling)
- 특별 기능: ANSI/BHMA Grade 2 Certified, Adjustable Latch, SmartKey Technology
- 모델 번호: 9GLA94710-039
- GTIN/UPC: 059184444445
8. 보증 및 지원
8.1 제조업체 보증
This Weiser product is backed by a Limited Lifetime Warranty. For specific terms and conditions, please refer to the warranty information provided with your product or visit the official Weiser web대지.
8.2 고객 지원
For further assistance, technical support, or warranty claims, please contact Weiser Customer Support through their official web사이트 또는 제품 포장에 제공된 연락처 정보를 참조하세요.
9. 제품 오버view 동영상
이 공식 영상을 통해 전체적인 내용을 확인하세요.view of Weiser products, highlighting key features and benefits, including SmartKey technology and various styles.
Video 9.1: An official Weiser brand video showcasing the range of products, including smart locks and handlesets, emphasizing security, technology, and convenience. This video demonstrates the SmartKey re-keying process and various design options.