소개
The Schellenberg 19300 Set of 3 Roller Shutter Shaft Hanging Brackets Mini for SW40 is designed to protect your roller shutter motor from potential damage caused by roller shutter suspensions. When a roller shutter motor is installed in a 40 mm diameter shaft, the limited space can lead to the shutter hangers scratching or damaging the motor. These hanging brackets provide a solution by creating a secure and separated attachment point for the roller shutter armor, ensuring quiet operation and extending the lifespan of your motor.
This set includes three hanging clips, suitable for a roller shutter wavelength of 1 meter, and is compatible with mini roller shutter systems and octagonal shafts with a 40 mm diameter.
Image: The Schellenberg 19300 set includes three black roller shutter shaft hanging brackets.
설정 및 설치
Proper installation of the Schellenberg 19300 hanging brackets is crucial for protecting your roller shutter motor and ensuring smooth operation. Follow these steps for a secure setup:
- 샤프트를 준비하세요: Ensure your roller shutter shaft is an octagonal shaft with a 40 mm diameter, compatible with the mini roller shutter system.
- 브래킷 위치: Take one hanging bracket and align it flush with a square perforation (Vierkantlochung) on the roller shutter shaft.
- Clamp the Bracket: Gently expand the bracket slightly and clamp it firmly onto the shaft. The bracket should sit securely around the shaft.
- 추가 괄호에 대해서도 동일한 과정을 반복하십시오. For a 1-meter wavelength, use all three included hanging clips. Repeat the positioning and clamping process for the remaining brackets, distributing them evenly along the shaft.
- Install Shaft and Motor: Once all brackets are securely clamped, install the prepared roller shutter shaft and motor into the roller shutter box.
- Attach Roller Shutter Suspensions: Hook the roller shutter armor suspensions into the special square holes of the hanging brackets. This ensures the suspensions are held away from the motor.
Image: Visual guide showing the four main steps for installing the hanging brackets: aligning and clamping, repeating the process, installing the shaft and motor, and hooking in the roller shutter suspensions.
이미지: 클로즈업 view demonstrating how to clamp the hanging bracket onto the roller shutter shaft, ensuring it aligns with the square perforation.
The installed brackets create a protective barrier, preventing direct contact between the roller shutter suspensions and the motor, thus safeguarding the motor from scratches and wear.
Image: The hanging brackets are shown correctly installed on the roller shutter shaft within the roller shutter housing, ready for the roller shutter armor.
작업
Once the Schellenberg 19300 hanging brackets are correctly installed, they operate passively by maintaining a clear separation between the roller shutter motor and the roller shutter suspensions. This separation ensures:
- 모터 보호 : The motor is protected from scratches and damage that could otherwise occur from direct contact with the moving suspensions.
- 조용한 작동: By eliminating friction between the suspensions and the motor, the overall operation of the roller shutter becomes significantly quieter.
- 부드러운 움직임: The roller shutter armor moves smoothly without hindrance from the motor housing.
Image: This diagram illustrates how the hanging brackets provide reliable protection for the built-in roller shutter motor, preventing scratches from the roller shutter suspensions.
유지
The Schellenberg 19300 hanging brackets require minimal maintenance. They are made from durable powder-coated steel designed for long-term use.
- 정기 검사: It is recommended to periodically inspect the brackets to ensure they remain securely clamped to the roller shutter shaft and that the roller shutter suspensions are properly seated in their designated square holes.
- 청소: If necessary, the brackets can be wiped clean with a damp 옷감. 가혹한 화학 물질이나 연마성 세제를 사용하지 마십시오.
문제 해결
If you encounter issues after installing the hanging brackets, consider the following:
- 소음 증가: If the roller shutter operation becomes noisy or you hear scratching sounds, check if the brackets are still securely clamped and properly aligned. Ensure the roller shutter suspensions are fully engaged in the square holes of the brackets and not making contact with the motor.
- Roller Shutter Movement Issues: If the roller shutter armor is not moving smoothly, verify that the brackets are not obstructing its path and that the suspensions are correctly attached.
- 브래킷 풀림: In rare cases, if a bracket loosens, re-clamp it firmly onto the shaft, ensuring it is flush with the square perforation.
명세서
| 상표 | Schellenberg |
| 모델 번호 | 19300 |
| 재료 | Powder-coated steel (Stahl pulverbeschichtet) |
| 품목 치수(L x W x H) | 40 x 16 x 40밀리미터 |
| 품목 무게 | 0.02 Kilograms (per set) |
| 호환성 | Mini roller shutter system, octagonal shaft with 40 mm diameter |
| 포함된 구성 요소 | 3 x hanging clips |
Image: Detailed diagram illustrating the dimensions of the hanging bracket and the square hole for roller shutter suspensions, compatible with 34-40 mm shafts.
보증 정보
For specific warranty details regarding the Schellenberg 19300 Roller Shutter Shaft Hanging Brackets, please refer to the warranty documentation provided with your purchase or contact Schellenberg customer service directly. General product warranties typically cover manufacturing defects under normal use conditions.
고객 지원
Should you require further assistance with the installation, operation, or troubleshooting of your Schellenberg 19300 hanging brackets, please contact Schellenberg customer support. Contact information can typically be found on the product packaging or the official Schellenberg web대지.
