1. 서론
Thank you for choosing the Flysky FS-i6X 10-Channel 2.4GHz RC Transmitter and X6B Receiver. This system utilizes Flysky's Automatic Frequency Hopping Digital System Second Generation (AFHDS 2A) protocol, providing reliable and interference-free control for various RC models, including fixed-wing aircraft, gliders, helicopters, and multi-rotors. This manual provides essential information for the proper setup, operation, and maintenance of your RC system.
2. 패키지 내용
포장 내용물을 꼼꼼히 확인하여 모든 품목이 있는지, 손상되지 않았는지 확인해 주십시오.
- Flysky FS-i6X 10-Channel 2.4GHz Transmitter
- Flysky X6B i-BUS Receiver
- 바인딩 플러그
- 사용 설명서 (본 문서)
3. 설정
3.1 송신기 배터리 설치
The FS-i6X transmitter requires four (4) AA batteries (1.5V each) for operation. Ensure correct polarity when inserting the batteries.
- 송신기 뒷면의 배터리 덮개를 엽니다.
- Insert four 1.5V AA batteries, observing the polarity markings (+/-).
- 배터리 덮개를 단단히 닫으세요.
3.2 Receiver Connection (X6B)
The X6B receiver is designed for multi-rotor applications and supports PWM, PPM, and i-BUS outputs. Connect the receiver to your flight controller or servos as follows:
- PWM 출력: Connect individual servos or ESCs to channels 1-6 on the receiver.
- PPM 출력: Connect the PPM output port to your flight controller's PPM input. This provides 8 channels over a single wire.
- i-BUS Output: Connect the i-BUS port to your flight controller's serial input. This provides 18 channels and telemetry data over a single wire.
영상: Flysky X6B i-BUS Receiver board. This image shows the compact blue circuit board of the X6B receiver, featuring dual antennas for improved signal reception, and clearly labeled ports for PPM, i-BUS, and individual PWM channels (CH1-CH6) for connecting to a flight controller or servos.
3.3 송신기 및 수신기 바인딩
Binding is the process of linking the transmitter to the receiver, allowing them to communicate exclusively. Ensure both devices are powered off before starting.
- Insert the binding plug into the 'BIND' port on the X6B receiver.
- 수신기에 전원을 연결하십시오. 수신기의 LED가 빠르게 깜빡이면 바인딩 모드에 진입한 것입니다.
- While holding down the 'BIND' button on the FS-i6X transmitter, power on the transmitter.
- The transmitter's screen should display 'Binding...' or similar. Release the 'BIND' button on the transmitter once the binding process begins.
- Once the receiver's LED turns solid, the binding is complete.
- Power off both the receiver and the transmitter.
- 수신기에서 바인딩 플러그를 제거하십시오.
- Power on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful connection.
4. 사용 설명서
4.1 전원 켜기/끄기
To power on the transmitter, press and hold the power button until the LCD screen illuminates. To power off, press and hold the power button again until the screen turns off.
4.2 송신기 배치 및 제어
영상: Flysky FS-i6X RC Transmitter front view. This image displays the front of the FS-i6X transmitter, highlighting its dual stick controls (gimbals), various switches (SWD, SWC, SWB, SWA), rotary knobs (VRB, VRA), and the central LCD screen for menu navigation and displaying flight data.
The FS-i6X transmitter features two primary control sticks (gimbals), several switches, and rotary knobs for controlling your RC model. The LCD screen and navigation buttons allow access to the system's settings.
- 왼쪽 스틱(모드 2): Controls Throttle (vertical) and Rudder (horizontal).
- 오른쪽 스틱(모드 2): Controls Elevator (vertical) and Aileron (horizontal).
- 스위치(SWA, SWB, SWC, SWD): Typically used for flight modes, gear, or auxiliary functions.
- Rotary Knobs (VRA, VRB): Used for fine-tuning or proportional control of auxiliary channels.
- LCD 화면: Displays current settings, telemetry data, and menu options.
- 탐색 버튼: 메뉴를 탐색하고 설정을 조정하는 데 사용됩니다.
4.3 메뉴 탐색 및 설정
Use the 'OK' button to enter the main menu and the 'UP'/'DOWN' buttons to scroll through options. The 'CANCEL' button typically returns to the previous screen or exits the menu.
- 시스템 설치: Configure model type, channel assignments, and system settings.
- 기능: Adjust sub-trims, endpoints, dual rates, and exponential settings.
- 표시하다: Monitor channel outputs and telemetry data (if available and configured).
5. 유지관리
Proper maintenance ensures the longevity and reliable performance of your Flysky FS-i6X system.
- 청소: 부드럽고 마른 천을 사용하여 송신기와 수신기를 청소하십시오. 용제나 연마성 세제는 사용하지 마십시오.
- 저장: 송신기와 수신기는 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오. 장기간 보관할 경우 송신기에서 배터리를 제거하십시오.
- 안테나 관리: Ensure the receiver antennas are not bent sharply or damaged. For optimal performance, position them at a 90-degree angle to each other.
- 펌웨어 업데이트: Flysky 공식 웹사이트를 주기적으로 확인하세요. website for firmware updates for your FS-i6X transmitter. Updates can improve performance and add new features. The FS-i6X supports online updates.
6. 문제 해결
If you encounter issues with your FS-i6X system, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 송신기의 전원이 켜지지 않습니다. | 배터리가 방전되었거나 잘못 설치되었습니다. | 배터리를 교체하거나 극성을 확인하세요. |
| Receiver LED is flashing rapidly. | Receiver is in binding mode or not bound. | 제본 절차를 수행합니다(섹션 3.3). |
| 모델에서 제어 반응이 없습니다. | 수신기가 연결되지 않았거나, 배선이 잘못되었거나, 전원에 문제가 있습니다. | Verify binding, check all connections, ensure receiver has power. |
| 제어 범위가 짧거나 신호가 끊깁니다. | Damaged antennas, interference, or low transmitter battery. | Check antenna condition and placement, avoid crowded 2.4GHz environments, replace transmitter batteries. |
| 낮은 볼륨tage warning on transmitter. | Transmitter batteries are low. | Replace transmitter batteries immediately. |
7. 사양
7.1 Flysky FS-i6X RC Transmitter
| 특징 | 사양 |
|---|---|
| 채널 | 6-10(기본값 6) |
| 모델 유형 | Fixed-wing / Glider / Helicopter |
| RF 범위 | 2.408~2.475GHz |
| RF 전력 | < 20dBm |
| RF 채널 | 135 |
| 대역폭 | 500kHz (XNUMXkHz) |
| 2.4GHz 시스템 | AFHDS 2A / AFHDS |
| 조정 | GFSK |
| 스틱 해상도 | 4096 |
| 낮은 볼륨tage 경고 | < 4.2V |
| DSC 포트 | PS/2 포트 PPM |
| 안테나 길이 | 26mm (듀얼 안테나) |
| 무게 | 392g |
| 힘 | 6V DC(4V AA 배터리 1.5개) |
| 표시하다 | STN Transflective LCD, 128x64 Lattice, VA 73x39mm, with white backlight |
| 크기 | 174×89×190mm |
| 온라인 업데이트 | 예 |
| 색상 | 검은색 |
| 인증서 | CE0678, FCC ID: N4ZFLYSKYI6X |
7.2 Flysky X6B i-BUS Receiver
| 특징 | 사양 |
|---|---|
| 브랜드 이름 | 플라이스키 |
| 목 | X6B i-BUS 수신기 |
| 채널 | 6 (PWM), 8 (PPM), 18 (i-BUS) |
| 모델 유형 | 멀티 로터 |
| RF 범위 | 2.408 ~ 2.475 GHz |
| 대역폭 | 500kHz (XNUMXkHz) |
| 밴드 | 135 |
| RF 전력 | 20dBm 미만 |
| 수신 감도 | -95dBm |
| 2.4GHz 프로토콜 | AFHDS 2A |
| 조정 | GFSK |
| 스틱 해상도 | 1024 |
| 낮은 볼륨tage 알람 | 예 |
| DSC 포트 | PPM / PWM / i-BUS |
| 안테나 길이 | 93mm (듀얼 안테나) |
| 전원 입력 | 4.0-8.4V |
| 온라인 업데이트 | 예(무선) |
| 범위 | >300분 |
| 무게 | 4.5g |
| 크기 | 36×22×7.5mm |
| i-BUS 항구 | 예 |
| 인증서 | CE0678, FCC ID: N4ZX6B00 |
Note: The FS-i6X transmitter is also compatible with other Flysky receivers such as FS-iA6B, FS-iA10B, and FS-A8S, which may have different specifications. This manual focuses on the X6B receiver included with this specific product variant.
8. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided by your retailer or contact Flysky customer service directly. Keep your proof of purchase for warranty claims.