1. 제품 오버view
The PROAIM STD-PT-Z-01 is a versatile 3-stage camera support stand designed for PT-Z cameras and other photographic equipment. It features a telescopic design for adjustable height, a detachable ball head for precise camera positioning, and a robust aluminum construction for stability and durability. This stand is suitable for various shooting environments, offering reliable support for payloads up to 20 kg (44 lb).
주요 특징은 다음과 같습니다.
- 텔레스코픽 디자인: Allows height adjustment from 30 to 75 inches.
- Detachable Ball Head: Enables precise camera leveling and smooth swivel rotation.
- 안정된 기반: Equipped with an adjustable middle spreader, spiked feet, and rubber shoes for stability on diverse surfaces.
- High-Grade Aluminum Construction: Ensures strength and durability, supporting up to 20 kg (44 lb).
- 가지고 다닐 수 있는: Lightweight and designed for compact storage and easy transport.
2. 상자 내용물
포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.
- PROAIM Three Stage 스탠드
- 3 x Feet (with spiked feet and rubber shoes)
- Ball Joint (Detachable Ball Head)
- Pouch For Ball Joint
3. 설정 지침
Follow these steps to set up your PROAIM camera support stand:
3.1 스탠드 펼치기
- Place the folded stand on a flat, stable surface.
- Gently extend the legs outwards until the middle spreader is fully deployed. Ensure the legs are locked securely in place.
- Verify that the spiked feet are positioned correctly. If using on delicate surfaces, attach the rubber shoes over the spiked feet for protection and added grip.
3.2 볼 헤드 장착
- Locate the detachable ball joint head.
- Screw the ball joint head onto the 5/8" baby pin mount at the top of the stand until it is firmly secured.
- Ensure the locking knob on the ball head is tightened to prevent unwanted movement during camera attachment.
4. 사용 설명서
Proper operation ensures optimal performance and safety for your equipment.
4.1 스탠드 높이 조절
- Loosen the locking collars on each telescopic section of the stand.
- Carefully extend or retract the sections to achieve the desired height (between 30 and 75 inches).
- Once the desired height is reached, firmly tighten all locking collars to secure the stand sections in place.
4.2 볼 헤드 사용
- Attach your camera or equipment to the mounting screw on the ball head. Ensure it is securely fastened.
- 카메라 각도를 조정하려면 볼 헤드의 메인 잠금 손잡이를 풀어주세요.
- Position your camera to the desired angle. The integrated spirit level can assist with precise leveling.
- Once the camera is positioned, firmly tighten the locking knob to secure the ball head and prevent movement.
5. Stability and Safety
The stand is designed for maximum stability. Always ensure proper setup for safe operation.
- Spiked Feet: For outdoor use or on uneven terrain, the spiked feet provide enhanced grip and stability.
- Rubber Shoes: For indoor use or on delicate surfaces, attach the provided rubber shoes over the spiked feet to prevent scratches and provide additional non-slip grip.
- 중량 용량: Do not exceed the maximum payload of 20 kg (44 lb) to ensure stability and prevent damage to the stand or your equipment.
- 중심: Always try to keep the center of gravity of your mounted equipment as low and centered as possible for optimal stability.
6. 유지관리
Regular maintenance will prolong the life and performance of your stand.
- 청소: Wipe down the stand with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, use a slightly damp 천과 순한 비누를 바른 후 완전히 말리십시오.
- 매끄럽게 하기: Periodically check the telescopic sections and locking mechanisms. If movement becomes stiff, apply a small amount of silicone-based lubricant to the moving parts. Avoid oil-based lubricants as they can attract dust.
- 저장: When not in use, fold the stand compactly and store it in a dry, clean environment, preferably in its original packaging or a protective bag.
- 점검: Regularly inspect all screws, bolts, and locking mechanisms for tightness. Tighten any loose components to ensure safe operation.
7. 문제 해결
일반적으로 발생할 수 있는 문제에 대한 해결책은 다음과 같습니다.
- 받침대가 흔들거립니다.
- Ensure all leg sections are fully extended and locking collars are tightened.
- Verify the middle spreader is fully deployed and locked.
- Check that the stand is on a level surface. Adjust leg length or position if necessary.
- Ensure the payload does not exceed the maximum weight capacity.
- Telescopic sections are difficult to extend/retract:
- Loosen the locking collars completely before attempting to adjust.
- Clean the telescopic sections to remove any accumulated dirt or debris.
- Apply a small amount of silicone-based lubricant to the inner surfaces of the telescopic tubes.
- 볼 헤드가 위치를 고정하지 못합니다.
- Ensure the main locking knob on the ball head is tightened firmly.
- Check that the camera or equipment is securely mounted to the ball head.
- Verify that the weight of the mounted equipment does not exceed the ball head's capacity (part of the overall stand capacity).
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | STD-PT-Z-01 |
| 상표 | 프로에임 |
| 재료 | 알루미늄, 고무 |
| 최소 높이 | 30인치(76.2cm) |
| 최대 높이 | 75인치(190.5cm) |
| 탑재량 용량 | 20kg(44파운드) |
| 품목 무게 | 12.14파운드(5.5kg) |
| 제품 치수(접었을 때) | 39.37 x 10.24 x 9.45인치(100 x 26 x 24cm) |
| 삼각대 헤드 유형 | Ball Heads (Detachable) |
| 장착 핀 | 5/8" Baby Pin |
9. 보증 및 지원
PROAIM products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official PROAIM web대지.
For technical support, spare parts, or service inquiries, please contact PROAIM customer service through their official channels. Keep your purchase receipt and model number (STD-PT-Z-01) handy when contacting support.
PROAIM Customer Service: Visit Proaim Support Page