후광view BTC125 Wireless RV Rearview FHD 1080P Camera Instruction Manual

소개

헤일로view BTC125 is a wireless Full HD 1080P rearview camera designed for recreational vehicles (RVs) and travel trailers. It integrates a marker light and provides a clear, low-latency video feed to compatible Haloview BT7 or BT6 monitor systems. This manual provides essential information for the proper installation, operation, and maintenance of your BTC125 camera.

Important Compatibility Note: This camera is NOT compatible with 720P wireless monitors.

이미지: 앞면 view of the Haloview BTC125 camera, showing the integrated red marker light, camera lens with LED illuminators, and wireless antenna.

패키지 내용

Verify that all items listed below are present in your package before proceeding with installation.

• BTC125 카메라
• 틈 메우는 물건
• 터미널 캡
• Mounting Screws and Wire Connectors
• 사용 설명서 (본 문서)

Image: A visual representation of the Haloview BTC125 package contents, including the camera, gasket, terminal cap, various screws, wire connectors, and the user manual.

명세서

설정 및 설치

Proper installation is crucial for optimal performance. If you are unsure about any steps, consult a qualified RV technician.

1. 카메라 장착

The BTC125 camera is designed to mount as a clearance light on the rear of your RV or travel trailer. Choose a location that provides a clear, unobstructed view of the rear and allows for secure wiring connections.

1. Identify a suitable mounting location, typically where an existing clearance light is or can be installed.
2. Use the provided gasket as a template to mark drilling points for mounting screws and wire pass-through.
3. Drill pilot holes for the mounting screws and a larger hole for the wiring. Ensure no internal components or wiring are damaged during drilling.
4. Secure the gasket to the camera's mounting surface.
5. 제공된 나사를 사용하여 카메라를 단단히 장착하세요.

이미지: 각도가 있는 view of the Haloview BTC125 camera, showing its compact design and how it would appear when mounted, with the antenna extending upwards.

2. 배선 연결

The camera requires a 12V DC power supply. Connect the camera's wires to your RV's power system, typically to the existing clearance light wiring or another switched 12V source.

• 빨간색 선: Connect to 12V positive (+) power.
• 검은색 와이어: Connect to ground (-) power.
• Green Wire (Trig): This is an optional trigger wire. If connected to a reverse light circuit, the camera can automatically switch to reverse view on your monitor when reversing.
• White Wire (GND): This is an additional ground wire, typically used with the trigger wire.

이미지: 후면 view of the Haloview BTC125 camera, displaying the wiring harness with clearly labeled red, black, green (Trig), and white (GND) wires, along with the antenna connection.

Ensure all connections are secure and properly insulated using the provided terminal cap and other appropriate connectors to prevent short circuits and water ingress.

3. Pairing with Monitor System

After installation, you will need to pair the BTC125 camera with your compatible Haloview BT7 or BT6 monitor. Refer to your monitor's instruction manual for specific pairing procedures. Generally, the process involves:

1. Power on your Haloview 감시 장치.
2. Access the pairing menu on the monitor.
3. Ensure the BTC125 camera is powered on.
4. Initiate the pairing process on the monitor. The camera should automatically connect.

If pairing fails, ensure the camera is powered correctly and within range of the monitor. Refer to the troubleshooting section for common pairing issues.

작동 지침

1. 전원 켜기 / 끄기

The camera powers on automatically when it receives 12V DC power. It will power off when the power supply is disconnected.

2. 비디오 디스플레이

Once paired, the camera's video feed will display on your Haloview monitor. The 1080P FHD resolution provides a clear and detailed view 차량 후면의.

3. Night Vision Features

The BTC125 features Full-Color Dim-Light Night Vision and Night Vision Fill Lights for enhanced visibility in low-light conditions.

• The camera's powerful image sensors deliver a full-color image even in dim-light conditions.
• The Night Vision Fill Lights can be activated or deactivated remotely by your monitor if the ambient light is extremely low. Consult your monitor's manual for this function.
• Once the camera's night light is turned ON, it will automatically illuminate when there is no sunlight.

4. 표시기 상태

The camera features two blue indicator lights to provide status information:

Image: A detailed diagram illustrating the indicator lights on the Haloview BTC125 camera. The left blue light indicates the night light status, and the right blue light indicates power polarity.

• Left Blue Light (Night Light):
  • When night light is ON, the display shows a light bulb icon, and the camera's left blue light is ON.
  • When night light is OFF, the camera's left blue light is OFF.
• Right Blue Light (Power Polarity Indicator Light):
  • The indicator light on the right turns ON when the positive and negative terminals of the power supply are correctly connected.
  • If this light does not turn ON, it indicates that the power polarity is reversed. Correct the wiring immediately.

유지

Regular maintenance ensures the longevity and optimal performance of your BTC125 camera.

• 청소: Periodically clean the camera lens and marker light cover with a soft, damp 천으로 닦아주세요. 렌즈에 흠집을 낼 수 있는 연마성 세척제는 사용하지 마세요.
• 배선 검사: Annually inspect all wiring connections for corrosion, fraying, or loose terminals. Ensure all connections remain waterproof.
• 장착 보안: Check the camera's mounting screws periodically to ensure they are tight and the camera is securely attached to the vehicle.
• 안테나: Ensure the antenna is securely fastened and free from damage.

문제 해결

If you encounter issues with your Haloview BTC125 camera, refer to the following common problems and solutions.

보증 및 지원

For warranty information and technical support, please refer to the official Haloview website or contact Haloview customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

후광view 고객 서비스: Visit Haloview 지원 페이지