아넹 PN200

ANENG PN200 디지털 Clamp 미터 멀티미터 사용 설명서

모델: PN200

1. 제품 오버view

The ANENG PN200 is a versatile digital clamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

ANENG PN200 디지털 Clamp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. 패키지 내용

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp 미터
  • AAA 배터리 2개
  • 복합 테스트 리드 세트 1개 (연결 소켓 4개, PVC 케이블 2개, 구리 바늘 2개, U자형 삽입물 2개, 미터 펜 2개, 악어 클립 2개, 천자 바늘 2개 포함)
  • 멀티미터 테스트 리드 세트 1개
  • 1x 충전 케이블
  • 1x 사용 설명서
  • 1x 보관함

3. 설정

3.1 배터리 설치

  1. 장치 뒷면에서 배터리 덮개를 찾으세요.
  2. 덮개를 밀어서 수납공간을 엽니다.
  3. AAA 배터리 2개를 올바른 극성(+/-)에 맞춰 삽입합니다.
  4. 배터리 덮개를 제자리에 밀어 넣어 딸깍 소리가 날 때까지 밀어 넣습니다.

3.2 테스트 리드 연결

  1. 권용tage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. 빨간색 테스트 리드를 'VΩHz' 잭에 삽입하십시오.
  3. 사용 전에 연결부가 단단히 고정되었는지 확인하십시오.

4. 사용 설명서

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 기능 선택

Turn the rotary dial to select the desired measurement function:

  • 뷔~: AC 볼륨tag전자 측정
  • V-: DC 볼륨tag전자 측정
  • A~: AC Current measurement (using clamp)
  • ㅏ-: DC Current measurement (using clamp)
  • Ω: 저항 측정
  • Hz : 주파수 측정
  • 정전 용량: 커패시턴스 측정
  • 다이오드/연속성: Diode test and Continuity check
  • NCV: 비접촉 Voltag전자 감지

4.2 주요 기능

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • 관계: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clamp주고받음.
  • 세트: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 구체적인 측정

Below are common measurement procedures:

AC/DC 볼륨tage 측정

  1. Turn the dial to 'V~' for AC voltagDC 볼륨의 경우 e 또는 'V-'tage.
  2. Connect the test leads to the circuit points you wish to measure.
  3. vol을 읽어보세요tag디스플레이의 e 값.

AC/DC 전류 측정(Cl)amp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. cl을 열어라amp jaws and enclose a single conductor (not a bundle of wires).
  3. 디스플레이에서 현재 값을 읽으세요.
  4. 메모: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clamp주고받음.
ANENG PN200 디지털 Clamp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
ANENG PN200 디지털 Clamp Meter showing various measurement functions

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltage, AC 볼륨tage, Capacitance, Diode, Capacitive Discharge, and Resistance.

비접촉 Voltage(NCV) 검출

  1. Turn the dial to 'NCV'.
  2. 클라의 윗부분을 가져오세요amp AC 전압 근처의 계량기tag출처.
  3. The meter will beep and an indicator light will illuminate if AC voltage가 감지되었습니다.
ANENG PN200 디지털 Clamp NCV 감지를 수행하는 측정기

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 공식 제품 영상 시연

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp 미터.

5. 유지관리

5.1 청소

부드럽고 마른 천으로 기기를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.

5.2 배터리 교체

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 보관

CL을 저장amp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

6. 문제 해결

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.