1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LLNSEAUTO Two Door Shaved Door Handle Kit. This universal kit is designed to provide a seamless keyless entry and door popping solution for various vehicles, including cars, vans, trucks, and pickups.
2. 패키지 내용
아래 나열된 모든 구성품이 패키지에 들어 있는지 확인하세요.
- 2 x Solenoid (50lb pulling force)
- 2 x Button switch
- 2 x Door popper kit
- 1 x Remote control set with Bluetooth functionality
- 2 x Wire and bracket sets (as shown in product photos)
메모: Relays are not included in this kit and must be purchased separately if required for your specific installation.
이미지: 이상view of all components included in the Two Door Shaved Door Handle Kit.
3. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | LLNSEAUTO |
| 모델 번호 | S001-SL50*2+Z011+Z009 |
| Solenoid Pulling Force | 50lb (other variants available: 75lb, 100lb) |
| 원격 제어 주파수 | 433.92MHz |
| 원격 제어 볼륨tage | 12V |
| Remote Control Current | < 5mA |
| 원격제어 코딩 | Learning Code, >1 million codes |
| 품목 무게 | 𠃥.57 pounds |
| 패키지 크기 | 𠃩.92 x 8.03 x 2.91 inches |
| 유니버설 핏 | Yes, for all cars, vans, trucks, and pickups |
Image: Detailed dimensions of the solenoid unit.
Image: Detailed dimensions of the solenoid mounting bracket.
Image: Detailed dimensions of the door popper and its mounting components.
4. 설정 및 설치
Professional installation is highly recommended for this product due to the complexity of automotive electrical systems and mechanical modifications. This section provides general guidance; refer to the included paper instructions for detailed diagrams and specific steps.
4.1 Solenoid Installation
The solenoids are designed to pull the door latch mechanism, allowing the door to pop open. Ensure proper mounting and alignment for effective operation.
- 1단계: Securely mount the solenoid using the provided bracket in a location that allows for direct connection to the door latch mechanism.
- 2단계: Connect the cable housing to the OEM latch.
- 3단계: Crimp the cable to the solenoid plunger.
Image: Solenoid installation steps diagram.
Important Grounding Note: To ensure proper operation and prevent damage, it is recommended to run a 10 AWG ground wire from the solenoid bracket directly to the negative side of the vehicle's battery.
4.2 Door Popper Installation
The door poppers are installed to push the door outward once the latch is released by the solenoid, ensuring the door opens smoothly.
Image: Door popper units and their associated mounting hardware.
이미지: 전ample of a door popper installed, illustrating its function in controlling door pop-out distance.
4.3 시스템 배선
The remote control kit integrates with the solenoids and can also be linked to other vehicle functions like parking lights, trunk release, or power windows. Refer to the wiring diagrams for correct connections.
Image: Solenoid wiring diagrams (Diagram I and Diagram II) for integration with existing keyless entry or alarm systems. Note: Relays and diodes are not included.
Image: Remote control unit wiring diagram, detailing connections for various vehicle functions.
The remote control unit features a learning button (SW1) and jumpers (J1, J2) for electric or pneumatic lock selection. The wire harness length is approximately 20 inches.
5. 사용 설명서
Once properly installed, the system allows for remote operation of your shaved door handles and other connected functions.
5.1 리모콘 기능
The remote control fobs provide the primary interface for operating the system. Specific button functions will depend on how your system is wired, but typically include:
- Unlock/Door Pop: Pressing the designated button on the remote will activate the solenoids, releasing the door latches and allowing the doors to pop open via the installed poppers.
- 잠그다: Locks the vehicle doors (if wired to central locking).
- 트렁크 해제: Activates the trunk popper solenoid (if wired).
- 기타 기능: Depending on your custom wiring, the remote may also control parking lights, power windows, or other accessories.
Image: Remote control unit with key fobs and wiring harness.
5.2 Manual Backup Button
For emergency access or in case of remote control battery failure, a manual button switch is included. This button should be installed in a discreet but accessible location within the vehicle to manually activate the door solenoids.
6. 유지관리
The LLNSEAUTO Shaved Door Handle Kit is designed for durability and requires minimal maintenance. However, regular checks can ensure long-term performance:
- 배선 검사: Periodically inspect all wiring connections for signs of wear, corrosion, or loose terminals. Ensure all connections remain secure.
- Solenoid Operation: Test the solenoids regularly to ensure they activate smoothly and with sufficient force.
- Door Popper Function: Verify that the door poppers are clean and move freely, providing adequate push to open the doors.
- 원격 제어 배터리: Replace batteries in the remote control fobs as needed to ensure reliable operation.
- 청결: Keep the components free from excessive dirt and debris, especially moving parts.
7. 문제 해결
If you encounter issues with your shaved door handle kit, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Solenoid does not activate. | No power, loose wiring, faulty remote/button, blown fuse. | Check power supply to the control unit. Inspect all wiring connections for looseness or corrosion. Test the remote control battery. Check for blown fuses in the circuit. |
| Door does not pop open after solenoid activation. | Weak solenoid pull, misaligned door popper, sticky latch. | Ensure solenoid is properly grounded and receiving full power. Adjust door popper position. Lubricate door latch mechanism. Consider a higher pulling force solenoid if available. |
| 리모컨이 작동하지 않습니다. | Dead battery, out of range, interference, unprogrammed remote. | Replace remote battery. Ensure you are within operating range. Check for strong radio interference. Re-program the remote control if necessary (refer to remote control kit instructions). |
| System activates intermittently. | Loose connections, weak battery, faulty component. | Inspect all wiring and ground connections. Check vehicle battery voltage. If issues persist, a component may be faulty and require replacement. |
If you are unable to resolve an issue, it is recommended to consult with a professional automotive technician.
8. 보증 및 지원
Specific warranty information for the LLNSEAUTO Two Door Shaved Door Handle Kit is not provided within this manual. Please refer to the product packaging or contact the manufacturer directly for warranty details and customer support inquiries.
For technical assistance or further questions, please reach out to LLNSEAUTO customer service through their official channels.