SelfieShow Auto Tracking Phone Holder (Model Blanc) Instruction Manual

소개

Thank you for choosing the SelfieShow Auto Tracking Phone Holder. This device is designed to enhance your video recording and live streaming experience by automatically tracking your face and movements, ensuring you always stay in frame. This manual provides detailed instructions for setup, operation, and maintenance to help you get the most out of your new device.

상자 안에 무엇이 들어있나요?

SelfieShow 360° Face Tracking Holder
USB 데이터 케이블(C 타입)
사용 설명서

제품 끝view

Familiarize yourself with the components of your SelfieShow Auto Tracking Phone Holder.

Diagram showing the components of the SelfieShow Auto Tracking Phone Holder, including the intelligent lens, flip button, two shooting needs, and British 1/4 nut base.

Figure 1: Key components of the SelfieShow Auto Tracking Phone Holder.

Intelligent Lens: Built-in camera for AI-powered face and object tracking.
뒤집기 버튼: Allows adjustment of the phone holder angle.
전화번호amp: 스마트폰을 안전하게 고정해줍니다.
전원 버튼: 장치를 켜거나 끕니다.
충전 포트(Type-C): 내부 배터리를 충전합니다.
1/4-inch Screw Thread Base: For mounting on tripods or other compatible accessories.

설정

1. 장치 충전

Before first use, fully charge the device using the provided USB Type-C cable. Connect the cable to the charging port on the device and a standard USB power adapter (not included). The charging indicator light will show the charging status.

2. Mounting Your Phone

휴대폰 뚜껑을 살살 당겨서 여세요.amp.
스마트폰을 cl에 삽입하세요.amp, ensuring it is securely held. The clamp supports phones with widths between 40-80mm (1.6-3.14 inches).
Adjust the phone's position for optimal balance.

Image showing a smartphone being securely placed into the adjustable clamp of the tracking phone holder.

Figure 2: Securing your phone in the clamp.

3. Attaching to a Tripod (Optional)

The SelfieShow holder features a universal 1/4-inch screw thread at its base, allowing it to be mounted on most standard tripods or stands for increased stability and height.

Locate the 1/4-inch screw thread at the bottom of the device.
Align the device with the screw on your tripod.
Rotate the device clockwise until it is securely fastened to the tripod.

Image showing the 1/4-inch screw thread at the base of the phone holder being attached to a tripod mount.

Figure 3: Attaching the holder to a tripod.

작동 지침

1. 전원 켜기/끄기

To power on: Press and hold the power button for 3 seconds. The indicator light will illuminate.
To power off: Press and hold the power button for 3 seconds. The indicator light will turn off.

2. Automatic Tracking

The SelfieShow holder features built-in AI intelligent recognition technology. No app or Bluetooth connection is required.

Once powered on, the device will automatically scan its environment.
It will detect and track the nearest human face or object, rotating 360 degrees horizontally to keep it in the center of the frame.

Image demonstrating the auto-tracking feature, showing the phone holder rotating to follow a person's movement.

Figure 4: Auto tracking in action.

3. 제스처 제어

Control the tracking function using simple hand gestures:

추적 시작: Make an 'OK' gesture with your hand towards the intelligent lens. The device will begin tracking.
추적 일시 중지: Raise your open palm towards the intelligent lens. The device will pause tracking.

Note: The effective distance for gesture control is within 1.5 meters (approximately 5 feet).

Image illustrating gesture controls: an 'OK' gesture to start tracking and an open palm gesture to stop tracking.

Figure 5: Gesture control for tracking.

4. Adjusting Shooting Angle and Orientation

수직 각도 조정: The phone holder can be manually adjusted from 0 to 180 degrees vertically to find your desired shooting angle.
가로/세로 촬영: 전화 clamp allows for both horizontal (landscape) and vertical (portrait) phone orientations. Simply rotate your phone within the clamp 모드 사이를 전환합니다.

Diagram showing the phone holder's ability to adjust 180 degrees vertically and rotate 360 degrees horizontally, supporting both landscape and portrait phone orientations.

Figure 6: Adjustable angle and rotation capabilities.

충전 중

The SelfieShow Auto Tracking Phone Holder has a built-in rechargeable lithium metal battery. A full charge provides approximately 5-6 hours of continuous use.

제공된 USB Type-C 케이블을 기기의 충전 포트에 연결하십시오.
케이블의 다른 쪽 끝을 USB 전원(예: 벽면 어댑터, 컴퓨터 USB 포트, 보조 배터리)에 연결하십시오.
The indicator light will show red during charging and turn off when fully charged.

유지

청소: 부드럽고 마른 천으로 기기를 닦으십시오. 액체 세척제나 용제를 사용하지 마십시오.
저장: 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
배터리 관리 : 배터리 수명을 연장하려면 배터리를 자주 완전히 방전하지 마십시오. 장시간 사용하지 않더라도 정기적으로 충전하십시오.
손질: 기기를 조심스럽게 다루십시오. 떨어뜨리거나 강한 충격을 주지 마십시오.

문제 해결

문제	가능한 원인	해결책
장치의 전원이 켜지지 않습니다.	배터리가 부족합니다.	제공된 USB Type-C 케이블을 사용하여 기기를 완전히 충전하십시오.
Tracking is not working or is erratic.	1. Insufficient lighting. 2. Subject is too far or too close. 3. Obstructions in front of the lens.	1. Ensure adequate lighting. 2. Position the subject within 1.5-3 meters (5-10 feet) for optimal tracking. 3. Ensure the intelligent lens is clear and unobstructed.
제스처 컨트롤이 응답하지 않습니다.	Subject is outside the effective gesture distance.	Ensure you are within 1.5 meters (5 feet) of the intelligent lens when performing gestures.
휴대전화가 안전하게 고정되어 있지 않습니다.	휴대폰 너비가 cl을 초과합니다amp 제한.	Ensure your phone's width is between 40-80mm (1.6-3.14 inches).

명세서

제품 크기: 3.74 x 3.74 x 7.23 인치
품목 무게: 7.8 온스
모델 번호: 블랑
배터리: 1개의 리튬 금속 배터리(포함)
연결성: USB(충전용)
특별 기능: Rotatable, Portable, Auto Tracking, Gesture Control, No App Required
호환 장치: Mobile phones, Cameras (via 1/4-inch screw mount)
호환되는 전화 모델: Universal (width 40-80mm)
장착 유형: Tripod (via 1/4-inch screw thread)

공식 제품 영상

Video 1: An official product video demonstrating the features and usage of the SelfieShow Auto Tracking Phone Holder.

보증 및 지원

For warranty information and customer support, please refer to the product packaging or contact SelfieShow customer service directly through their official web제품을 구매한 사이트 또는 판매점에 문의하십시오. 보증 청구를 위해 구매 영수증을 보관하십시오.

SelfieShow Blanc